How to Prevent Suppressor Walk Off 

Yes thank you for mentioning the O-ring. See this all the time. People don’t understand

So what I'm hearing is Sig did it right with the thread pitch everyone despises. And it screws on a lot faster then 1/2x28

Just use a cam-lok piston from griffin

It appears from the video that you've installed the teflon tape against the shoulder, despite the warning not to do so. There is no need to run the teflon tape back that far as there aren't even threads on my pistol or piston in that area. Also, you recommend left-hand threads, but most of what I've seen on the market is 1/2x28. Would love a 1/2x28 threaded barrel with opposite twist rifling.

Travis is awesome. Helped me with my baffle strike. Nicest guy in customer service.

Its insane to me that metric LH threads are known to prevent this, yet most factory barrels and all aftermarket barrels in the US are still 1/2x28 RH. Hoping the teflon will be as effective.

Rugged you read my mind. Thanks for posting.

Hi. Can i put anti seize and teflon tape together for a direct threat suppressor? For9mm glock and 556 ar15. Thankyou 🙏

THANKS for the Video!!! GOOD to KNOW about the O-Ring.

It’s nice to see Seth Green exercising his 2A rights 😂

I LOVE you guys and LOVE my Obsidian 45, but freakin hell with the teflon tape! I have tried this and it does not work on my G19 w/ Silencerco barrel. It starts out ok but eventually starts to walk. Again, with love, it is wholly unacceptable that this industry keeps using antiquated thread systems that loosen on the front of a firearm. My first time out with my new Obsidian 45 was met with an end cap strike because of this. You guys very graciously sent me a new one right away, so no complaints there. Having said all that, I have just ordered Griffen Armaments’ Cam Lok system. I am hoping this will put an end to my can walking while shooting under stress. I look forward to the day when we were all sitting around the campfire talking about the days when threaded silencers came loose on firearms. I will greatly enjoy the knee-slapping belly-laughs when somebody says “Remember when they used to tell us to use Teflon tape!!!!” 🤣🤣🤣 Much Love, Max

This is why h&k is superior. M16 x1 LH because the Germans know what they are doing.

This trick works. It really works. Been doing this for 2 years. Be sure to test how many wraps it takes for your threads. Too few turns and it wont work. To many and your suppressor will not thread on fully. Ony wrap the threads and nothing else. My rig takes 2 1\2 turns. Good luck and happy PFT PFT!!!

#3lugmafia

What about 22 pistols, is walk off a problems with 22 pistols?

Cool

I was looking for this exact advice about my rugged obsidian 9 I just got

I love my Rugged Silencers! You are absolutely right about that O Ring!

walk off isn't a issue with your collar locking suppressors like the 556 razor is it?

Works….. I’ve run my Obsidian with tape on my FA MP5 and it’s never backed off.

I am running a rugged tri lug mount on my silencerco omega 9k and have shot about 1,000 rounds out of an APC9. The suppressor will now twist off if I wiggle the can back and forth without pushing in on it like before. It only does it on one side of the twist as twisting without pressing in on the other side stays locked like it should. Is there any trouble shooting tips I should do to fix this?

O-ring tip very important. New to suppressors and am researching as much as I can. Still waiting to physically receive my suppressors.

How do break apart stuck baffles from each other?

Why is that the case with metric left hand threads not walking off?

What gloves in the shooting scenes?

buy a mark 23 with a kac 23 can - they use an o ring and it dont budge ...

Why not just use rocksett? Degrease the threads on both the barrel and the silencer, apply the rocksett, thread the silencer on. Immediately fire off a dozen or so rounds to heat up the silencer so the threads expand a bit, then tighten down again. Repeat until you can't tighten it any further, then just let the rocksett cure.

My obsidian 9 walks off my CZ pistols after a couple shots without the teflon tape, but it gets tedious cleaning off the tape afterwards and putting it on each time.