Man I can’t thank you enough!!! I was going crazy trying to figure out why my car wasn’t detecting my key fob. I replaced the battery and that didn’t fix the problem. So a guy recommended that I reprogram the remote key. I bought a new one and tried to reprogram both remotes using your video and it worked for the new key and not the old one. So it was a problem with my old key fob all along. And your video 100% helped solve my problem. Now I don’t have to manually unlock and start my car any more. Thanks a million!
Thank you so much for the video 🙏🏽 ‼️‼️After programming all functions worked accept for remote start. So I held the near the push start button & held the lock button down for 3secs & the remote start works!!‼️‼️
Great video, did mine yesterday and some of the features worked,remote start,lock unlock from new remote worked,car would only start with new fob in console fob holder and the keyless lock/unlock from door handle not working,gonna try programming again,nevermore good job👍
Great video, but what I learned was, I had bought spare keys before and my 2015 Impala knew that. When I went into program mode the car said key number 4 ready. So I programmed 2 new key fobs in 3 mins. I didn't have to wait the 10 mins between programming because the car had made keys for me in the past.
This was very helpful. I noticed doing my 219 if you all the fobs present you can skip the timer segments and go right to the next fob to be programmed. Under 2 mins.
I'm confused about the key u put into the door lock.....so when do u remove the key from the door lock or do u keep it in until all the key fobs are programmes
I brought two key fobs from Amazon but they didn't hv proximity. Found this out after I used your video. Everything works but I can't turn on without key being in the transmitter.
PLEASE READ to exit the pairing mode Hold the engine / Stop button If not the screens will go black and you’ll think you did something wrong an the car won’t start
Did this in under 10 minutes on a 2019 impala. Held the brake down , then pushed the start button 5 times. It said ready for remote 1 then I did the second one. After that I held the start button for 12 seconds then it started with the new key
Do you need to program the first remote ? My unlock button is broken and I won’t be able to do that step with my old key . I have a 2018 impala push start
i did everything and after “ready for remote one” when i took out the key the unlock button didn’t work so you think maybe the battery is dead i used it all the time but i always have to put it in the middle console
@@AS-pr4ww Mine doesn't go into learning mode. It just says the key fob Numbers then programs a new one after I push the start button. Maybe I have to reach the maximum fobs first. On a 2014 impala ltz that conforms to regulations: 2015 FFV.
