Today's video mainly introduces the usage of Rodot copy/clone remote control.
Rodot clone remote control can copy rolling codes and some special codes.
U.S. site : www.amazon.com...
German site : www.amazon.de/...
If you want to copy the remote control, you must first make the clone remote control in an uncoded state(clear code)
Specific clearing operations:
Long press the A button and B button of the Rodot remote control. When the indicator light flashes, keep the A button unreleased and press the B button 3 times .
It is worth noting that you must wait for the indicator light to flash slightly before pressing the B button, otherwise it may cause the code clearing failure!
Status after clearing the code: long press any button, the indicator light flashes and then goes out!
Specific copy programming operation:
Prepare your original remote control and the RODOT remote control that has been cleared.
For example, if you want to copy the A button function code of the original remote control to the A button of the RODOT remote control, so that the RODOT also has the function of the original remote control A button, you can Do this:
1、Long press the A button of the RODOT remote control, the indicator light flashes and then goes out. At this time, the A button is in a state of waiting to receive the code value.
2、Long press the A button of the original remote control, the original remote control sends a code.
3、While pressing and holding, keep the two remote controls as close as possible.
4、Wait until the indicator light of the RODOT remote control becomes steady on, which means the copy is successful!
If you have any questions or needs, please comment below the video or contact the email daisy@rodotdiy.com
Thank you for watching!
14 окт 2024