How To Properly Repair a Tire

Подписаться 1,8 млн

Просмотров 472 тыс.

50% 1

There are a few different methods you can use for tire repair. The method I show in this video is considered the ‘best possible tire repair’. This method is also known as the “Tire Plug/Patch Repair”.
**Be sure to check with your tire manufacture to see what repairs are acceptable with their products.
#ETCGVideo
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarguy.com
Check out the ETCG Blog for the latest info: www.ericthecarguy.com/blog
Check out my ETCG1 channel: ru-vid.com?su...
Thanks for watching!
Camera: Brian Kast, Eric Cook
Links (Some are affiliate links)
Plug/Patches: amzn.to/3o7UbTh
“Sticher” (roller wheel): amzn.to/3GRMBU2
Carbide Cutter (special drill bit): amzn.to/3nNUDpw
Pre Buff Cleaner: amzn.to/350XRzc
Tire Buffing Wheel: amzn.to/3rAAe8w
Rubber Cement: amzn.to/3qM2hma
Sealer: amzn.to/3IoVXXB
Related Videos
Tires 101: • Tires 101 - EricTheCarGuy
How To Mount and Balance a Tire: • How To Mount and Balan...
How To Plug a Tire and Check for Leaks (Old Video): • How To Plug A Tire and...
How To Safely Lift and Support Your Vehicle: • How To Safely Lift and...
How Old are Your Tires?: • How Old Are Your Tires?
How To Avoid TPMS Damage When Replacing Tires: • How To Avoid TPMS Dama...
How To Remove Wheel Locks Without a Key: • How To Remove Wheel Lo...
The Secret To a Quiet Ride: • The Secret to a Quiet ...
How To Change a Flat Tire Using the Tools in Your Car: • How To Change a Flat T...
Torquing Wheels and Why it’s Important: • Torquing Wheels and Wh...
How To Remove a Stuck Wheel: • How To Remove A Stuck ...
Do You Need an Alignment?: • Do You Need an Alignme...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Авто/Мото

Опубликовано:

16 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 741

@danielhowiesr.2593 4 года назад

I'm still riding on a tire that I repaired with the old-fashioned tire plug. I installed it in November of 2019, and it is still holding up. I like your plug way better, but I don't have the tire changing equipment. Thanks for posting the video!

@cafe100mph6 Год назад

A simple tire plug is probably better, and I think Eric the op widened the hole too much. Less is more, just clean the hole by hand, and jam a plug in there (with some rubber cement)

@philipwilliams7947 Месяц назад

Yep. I work in a service industry where we have a fleet of cars. We tend to do our own tire plugs. The many plugs I have done over the years have lasted until the tires needed changed. Never had a plug fail.

@PETERNESS Месяц назад

this ten minute video could potentially save someones life Eric ,god bless you, i still miss him everyday

@twalters51 4 года назад

I currently own and run a tire shop. The repair you showed is what Tire Industry Association or "TIA" recommends. This is how tire repairs are done in my shop. The rope plugs work great temporarily but usually dry out. Around my area of Ohio the gravel roads are hard on tires and usually the rope plugs end up leaking again in a few days and people come in for a "permanent" repair. Our method is similar, the tire repair company even has training classes for repairing tires that I have went too. Even have the certificate to prove it lol. Thanks for the videos been watching for years!

@GiovanniLorenzo0 3 месяца назад

No you're just trying to get more money out of your client's

@cf5914 Месяц назад

They don't dry out.

@philipwilliams7947 Месяц назад

Yeah. I’m in Ohio too. I work in the service industry (repairing electronics and such). Our company cars, we plug our own tires. Of the many I have done, not one plug has failed. In fact, they lasted until tire replacement related to normal wear and tear.

@markgardner8786 4 года назад

Hi Eric, I am in the UK and am an IMI qualified high performance wheel and tyre fitter. As you probably know moisture is the enemy of rubber so I use nitrogen to fill my customers and my tyres. After using the pre buff fluid it is important to scrape the area to remove the silicone sealant that the interior of the tyre is coated with, otherwise you are forcing silicone into the repair area. Also after applying the plug patch it is extremely important to cover the entire area with sealant and not leave raw rubber exposed. Most garage forecourts do not dry the air on their inflation machines causing moisture within the tyre. This now affects TPMS systems during season changes. Kindest regards Mark

@AbhishekKumar1902 8 месяцев назад

Hey mark, thanks for the suggestion. I don't have rubber cement (for tyres) available in my place where I live in India. After applying the plug patch, can I use any alternative to seal the exposed rubber. Sounds like a foolish idea but can I use something like a "Threebond high temperature RTV sealant" which is used in gasket making for oil pans, etc? At the end, it is a slicone rubber, right?

@bobbydelamar606 Год назад

I've never had a tire plug fail. Project Farms has a good testing video.

@FGuilt 4 года назад

Step one to do a tire repair: drag out your tire changing machine that you keep in your trunk.

@mr.nobody4900 4 года назад

Laughing my ass off. That's a good one.

@samueladams2649 4 года назад

😊😀😁😁😂😂🤣🤣🤣

@jobsjobbed5125 4 года назад

Or pop the spare on until you get home

@brendanrandle 4 года назад

a bead breaker and a couple of levers could easily fit in even a small car

@paulparoma 4 года назад

Who keeps their tire changing machine in the trunk?! I keep mine in the glove box, like a person.

@Motorsportsgeek 4 года назад

I've been using plugs for years and they never failed me. Did burnout on it this the belts on the tires were showing, the plugs never failed.

@ericthecarguy 4 года назад

I'm glad to hear that, but I'm just passing along information that tire companies feel you need to know. Thank you for your comment.

@Slicko316 4 года назад

I'v come across two tire plugs that were still leaking just in the last six months, Im a truck and trailer tech, i don't even deal with car tires, these were just incidentals related to coworkers and Friends, plugs are a temporary solution. and if you have the means or the $20 to get them patched, get them patched. (Plug a commercial truck tire get a fine btw)

@johnh.blevins5927 4 года назад

I remember working in a service station (gas station where I actually pumped the gas for the customer AND we had a functioning garage with a mechanic - imagine such a thing!) anyway, we would break the tire down, prep the inside after jabbing the puncture violently to make it larger, cussing at it, “Ahhh, it’s too small to see!” roughening the rubber to hold the adhesive I suppose, throw a burning match on the glue, yell fire!, then apply the patch, vulcanizing the rubber. Live long, and prosper! Good times watching the sheer panic and uncertainty on the face of the customer in the waiting area! Nowadays I plug it and drive it until there no tread left, without leaks or failures. Simplifying my life.

@mtay65 4 года назад

Been using rope plug ever since it was introduced. Never failed.

@jakeguerrant2162 3 года назад

Yep had to put put a plug in my brand new tire once and it stay there until the tire didn't have tread enough to pass inspection. people really don't need to do all of this extra non sense if you install a plug properly.

@mflorest3 2 года назад

Me too once I repaired a tire with rope plug and it lasted till the tire wore out..it was a almost new tire too!!

@teddybear2123 4 года назад

Good tutorial Eric, however how many of us have tire machine sitting in home garage? Been using tire plugs for years without any problems.

@pprocacci 4 года назад

Exactly this. I'll stick to plugs.

@ericthecarguy 4 года назад

Excellent point, and I have a video about installing 'rope plugs' linked in the description. That said, I made this video to show what the tire companies want you to do when repairing a tire, if they allow repairs at all. If a tire shop were to use a 'rope plug', they could be held liable if there is an accident as a result of a tire failure. Thank you for the comment.

@dafirnz 4 года назад

When you take a tire somewhere you can ask how they are going to repair it and now you will understand what they are doing.

@gabewisneski6854 4 года назад

From working at america's/discount tire, one thing to be aware of is if you ever bring us a leaking tire and we find that you used a rope plug or patch without a plug we can no longer service the affected tire. Just FYI.

@robertcornelisse8664 4 года назад

I worked at a car dealer, we always used rope plugs, never had a problem. As long as you dont plug near the shoulder.

@nicknolfi7869 Год назад

Thanks Eric! You're an excellent presenter (great voice, very articulate) as well as an extremely knowledgeable auto repair person. Most importantly, you convinced me that I should not attempt to repair a tire puncture on my own because there is much, much more to it than meets the eye! For the sake of safety, it's a job that's best left to the pros. I'd rather have my pocketbook feel a little lighter than take the unnecessary risk of a tire blowout. Thanks once again!

@MrGoblin60 4 месяца назад

Many thanks Eric. That was a straight-to-the-point, no-nonsense presentation which was very helpful. What's more, there was no foul language. Great work!

@WOODY11780 2 года назад

I work at a busy Service Dept of a Nissan dealership....This is our standard method of puncture repair....Hands Down....It's the Best !!!

@dreadnought4753 4 года назад

As an extra step, I recommend cleaning and scraping the surface after buffing, the smoother surface holds better for me. An important tip for many of you, many tire chains such as Discount will do these style repairs, free. Most other tire shops due so at a cost of course. If you bought your tires from a good chain, you will often also get a protection plan including repairs. Talk with your tire installer about these warranties. Usually, at an additional cost, they also offer a pro rate plan, to discount an unrepairable tire. The important thing is that the repair is done right. Ive got a 4 year old rope plug holding just fine on my truck, ive also seen these umbrella plugs fail in days. If the guy seems like an idiot, dont let him touch your damn car.

@ericthecarguy 4 года назад

Excellent input. Thank you.

@coronachicks 4 года назад

My time is valuable too. At the discount tire chain, I have to wait for 1 to 3 hours for them to do the work. In 5-10 minutes the plug is done.

@digitalrailroader 4 года назад

Usually if a patch plug fails days after the repair, it was done incorrectly. And on the subject of a road hazard warranty, Walmart offers one at $10 a tire (and it lasts the entire lifespan of the tire down to 2/32) and our flat repair cost is $15

@johnmorgan7262 4 года назад

Even if you go to a good chain they will typically only protect certain tires. If your tire is over a certain price point, you are on your own.

@theory816 4 года назад

@Matthew Kerhin Unless the patch was utter shit, you hold liability.

@cormegastarks8815 4 года назад

This guy has the best advice fr the least experienced mechanic to the top experienced mechanic...iv done at least 1500 to 2000 dollars worth of wrk on my car just by watching his videos..

@camaronash 4 года назад

Ah, this brings back memories. This is exactly how we repaired tires when I was a tire changer.

@stephenyanacek1763 4 года назад

Love your videos buddy

@kennethhicks2113 4 года назад

lol, 60's method is best! Agree (fire the (old) glue!) I use plugs while still on my vehicle, cheap, quick and easy and good enough till it leaks again. Never had to do it more than twice before the tire wore out anyway.

@MechanicMindset 4 года назад

Ritual like process. The satisfaction of reaming that hole out first. There’s an innuendo opportunity somewhere 😉

@codyc9197 3 года назад

This is the ONLY way it should be done. And I hate the liquid patch crap😤

@leegraves101 Год назад

I was taught to use these in the 80s at Honda School. If they recommend it then it must be ok. I’ve since used them on motorcycles and cars with great results.

@FredTheLutinoCocatiel 4 года назад

I remember back in the day we had Vulcanizing kits where you at stick the patch inside the tire and the patch add a metal tray that you would light on fire

@jayyoutube8790 4 года назад

I remember those. Those worked well. I remember using “c” clamps to hold the metal tray wile you light it.

@eddie5556 3 года назад

Camel Patch?

@stevenc8140 2 года назад

Yeah!!!! I kept on waiting for IGNITION!! None happened. BURP‼️

@stevenc8140 2 года назад

@@eddie5556 that’s what they were!!! Good memory from the 60’s

@Daremo6969 2 года назад

hah yah, we used to do pretty much the same with our bikes as kids...set dat glue on fire, like flambé.

@coachmattc 2 года назад

I was well aware of the rope plug and I thought I knew what a patch on the inside was. Called the dealer to see if my wife purchased road hazzard when she bought the car. She did not, but they said they will patch it for free. Drive down and the tech said he would have it plugged in about 15 minutes. I asked "Plugged or patched?" He said they plugged them. He said Wally world would do a patch. Called there and they said patch plug. I had no idea... watched this and drove right over. Thanks Eric. Information is power.

@s0nnyburnett 4 года назад

Thank you for a decade of knowledge and excellent professional videos.

@caddyrack 3 года назад

Hello Eric, finally you show how-to-properly repair a punctured tire. I've been doing this for well over 30 years, Goodyear was on the forefront of proper tire repair. They trained their techs with this feature, we NEVER used plugs. I'm glad you set the record straight. Keep up the good work, you're never too old to learn new/old tricks. Cheers from Vancouver Canada. Vince

@VacFink 4 года назад

Informative and adequate evidence that its worth stopping by my local tire shop to defer to their better access to tools and expertise in this case. Very helpful.

@robertgraham5619 2 года назад

Well done! Right to the point, no added music, covered all points. Consider yourself subscribed!

@Otagner 4 года назад

Great instructions!!! Also Eric, the pre buff cleaner is to remove the release compound from when the tire was molded and you should scrape with a flat piece of metal (they make a specific tool but it's not an absolute must) after spraying that on, while it's wet. You will see the goop come off lol.

@TheTanadu Год назад

But after that you sand the rubber "flat" anyway, so that's how that goop comes off anyway

@Otagner Год назад

@@TheTanadu in a way, yes but it also can get ground into the rubber which is not ideal.

@Tedybear315 4 года назад

Nice info. Been using (when I used to be a mechanic) "Stud Patches" from 30+ years ago. Didn't have the sealer step however- Love the ream on the drill motor!

@alexg8849 4 года назад

I really miss the old Eric the car guy! When the lift was Harbor freight jack stands and a piece of cardboard and you had to patch the floor for the engine crane to pass the uneven floor. Those are the most fun and helpful on RU-vid. Come on man! How many of your viewers have a tire machine?

@cpgone 4 года назад

Right... BUT ETCG was always taking half and hour to tell a 10 minute story. He stares at a lava lamp for hours

@ericthecarguy 4 года назад

The purpose of this video was to show why some tire repairs cost more, and also to educate people about what many tire companies require when a tire is repaired. The past is the past. Me, I like to move forward. Thank you for your comment.

@Charlie_Crown 4 года назад

Thanks Eric, for showing the correct way, and why that costs more, but also highlights how important preparation is if using this method. However, there's no guarantee other techs are going to be as conscientious as you are. So, for me anyway, i'll be sticking with the plug method, as it has worked well for me, and i'm confident it will hold. Great content as always, you and Eric O, SMA, are the best, and Chris, of course 😁👍

@christineirving4300 3 года назад

Recently had a tire plugged and wondered how they did it. Good video.

@matthewmercer2477 10 месяцев назад

I am impressed ! I hope that's what my shop did today.

@attackroflchopter4403 4 года назад

Here is my method, no failures after 13 years. I plug tires constantly due to my job... Find hole with soapy water from a spray bottle. Select drill bit a few sizes smaller than tire plug, close eyes, drill the hole in tire to make it easier to shove plug in, shove plug in, inflate tire replace tire, drive to work, pick up another screw or nail. lol, so far so good.

@philc.9280 11 месяцев назад

Just happened to catch this 3-year-old video. When you're in the middle of nowhere and it's late at night my rubber plug or the liquid leak sealer is still the best way to go until you can get to a tire shop. We do a lot of RVing and need a quick repair method. I even had the new plastic screw method for a quick repair until you can get to safety.

@metoon3092 4 года назад

Good video, I have seen the plug/patch, but never had installed/ used one. I believe most all of us know, patching is best, plugging gets us by. You explain that in the video.Thank you for the video.

@razinhailsharp4439 4 года назад

I know you're not supposed to use plugs on sidewalls, but I did once. Partly because I wanted to see if it would hold, and partly because I couldn't afford the new tire. It lasted over 20,000 miles. I had to replace the tire due to normal treadwear and the plug was still holding tight. I got VERY Lucky. Don't be like me. But if you've ever wondered, now you know lol

@rickpalechuk4411 4 года назад

Ah yes, a reminder of good times long gone... my first job, at the chevron station fixing tires. Started with a high speed static balancer (scary). Moved on to a fancy low speed "computerized " one. Beat a lot of split rims apart. Loved every minute of it. Cheers man

@sillyfecker 3 года назад

Did that balancer have a seat and a big headlamp on it?

@OffKilterHomestead 4 года назад

Had a customer go off on me when I did a patch plug. “You just broke the cords! Now my tire is going to fall aprart!” He even questioned my mother’s virtue. I’m like dude, that big ass roofing tab broke your chords. Lol

@ericthecarguy 4 года назад

It's a thankless job somedays. You should try making RU-vid videos. Check the comments to this video to see what I mean. Hang in there and stay safe my friend.

@OffKilterHomestead 4 года назад

EricTheCarGuy haha. I understand. Thought people are nice in the homesteading niche unless you are showing how to slaughter an animal. Haha

@robs1852 4 года назад

The guy knows what tire cords are but yet doesnt know that even with a regular old plug you still have to ream out the hole the same way

@firozosman 4 года назад

thanks eric. came back to your channel after many many years. must say youre still awesome. and fantastic whiskers btw .

@ronniebladez5402 11 месяцев назад

Yo Eric! That was a smooth tip about marking the tire stem location to keep the balance of the tire. Thanks for always exceeding expectations!! 😁

@dalebabbitt6185 4 года назад

Great video, very informative. You (ETCG), Ivan (PHAD) and Brian (FordTechMakuloco) are the best. I appreciate all you guys do to GIVE us all this information. Ivan would have used the PICO scope first just to make sure the tire was low on pressue. You fired the "patch" cannon first and struck gold. Thanks Eric!!! Above all, you and your family, STAY SAFE!!!

@MrWilliam.Stewart 4 года назад

I never get tired of your videos, you tread carefully on the subject and have a good grip on the situation.

@ericthecarguy 4 года назад

Thank you very much for that. Answering comments to my videos can get somewhat frustrating, especially since I'm just trying to share useful information, for free at that. I'm happy to admit when I'm wrong, but I get tired of trying to justify every detail of the videos I produce.

@MrWilliam.Stewart 4 года назад

@@ericthecarguy Thanks for the reply Ezza. I for one really enjoy your videos. Please excuse my bad attempt at some tyre puns.

@piter85hh 4 года назад

Keep doing what u do the best Eric

@jazzcam2799 2 года назад

I like the tyre sealer idea at the end , I will definitely do that , thanks 🙏🏼 great video

@VERONICALIGONCRAVIN Год назад

Welp! I'm done - got almost half way and knew this was NOT the video, OR METHOD, for me! However, I was VERY entertained reading the comments!!! Lolol

@user-ic8cx9qq9c 4 месяца назад

As usual, thorough and professional. You are George Clooney mechanics Thank you. 🎉

@williamjohnson9936 4 года назад

Love the video! I will use this with my Honda students! Thanks Eric!

@marktaylor1498 4 года назад

Useful tip use your balancing pliers/hammer to pull plug through tyre you will find provision in pliers to grip the stem of tyre plug . It's good to see more tutorial vids keep them coming 👍👍👍👍👍

@troyfall6573 Год назад

That was a good video. I have repaired maybe 8 tires in my lifetime using the licorice stick method and never had one fail.

@binershock 3 года назад

Thanks for acknowledging the subjectivity of repair options and policies. Can be really maddening when people don't do that.

@jimthecarguy 4 года назад

Nice video Eric. That is the only way a tire should be repaired. I have this discussion all the tire with customers. My shop is the only one who does this kind of repair . Even the dealers are plugging tires by me.

@joehyundaitech7961 3 года назад

we patch at my dealership.

@lunalancer5971 3 года назад

what dealership doesnt do this

@hunati31 2 года назад

Nice plugged in ad here.

@mjnc3672 3 года назад

The mechanic at a busy tire shop told me most flats in the U.S. are the right rear. Reason stated was that more road debris is closer to the curb side where a nail or screw is run over by the front tire which kicks it airborne where it's then punctures the rear tire.

@KingZoneOne 2 года назад

"... the offending object". You're so proper, L😄L! Thanks for all the years of great info and expertise.

@robb4879 2 месяца назад

A repair like this priceless 👌

@robertgeist2873 8 месяцев назад

Great demo.thanks for the demo

@GSXRcop41 3 года назад

Great video! An "addendum" you consider would be what to look for in a tire to make sure it is still safe for the road. For example, if the driver drove on the tire flat, for even a short period, the friction from the wheel pinching the tire against the road has the edge of that wheel like a knife blade, usually, on the sidewall of the tire. The end result may be rubbery powder and bits inside the tire that are found when you take it off the wheel. When the sidewalls are ate up like that, I was told to discard the tire as it is no longer safe to patch. A lot of people criticize plugs, saying that they will blow out, the car flips end over end, and everyone dies. (Note: I do agree the method you've shown is the way to go and plugs are a good roadside fix to get to the tire shop to do the patch/plug.) But, I don't think that is accurate. It seems to me that actually the tire plugged or patched had received other unknown damage to where it should have been discarded. It gets patched anyway, the tire plows out, and the repair is blamed, when the repair itself was not the problem, but rather the tire should have been inspected. This is where the DIYer may be "lead astray." They may do the patch/plug and, because they didn't know any better, didn't bother to inspect the tire. Anyway, love the videos! And thanks!

@joshuasimeone3729 3 года назад

2 is 1 and 1 is none folks. Great video on how to repair a tire the correct way.

@ericlara1876 2 года назад

Thanks for the video. Most if not all manufactures don't want you to repair it. And yes this is the only expectable way repairing a tire if you are doing it for profit.

@MotorScotti 4 года назад

Great job Eric, thanks for sharing. It's a lot of work, though. I'd only do that if the tire is reasonable new.

@FyberOptic 4 года назад

Sometimes you can't find a leak if there isn't enough pressure. My dad had once given up, but I let the jack down to put weight back on it and sprayed it again, and found it right away.

@cagonzal13 4 года назад

Thank you Eric nice patch work.

@richardfillmore8275 4 года назад

Always love watching your videos

@lautarodupuy7559 11 месяцев назад

I work at discount tire and although there are better plug and patch methods, this is great thanks

@TheSwitzAutomotive 4 года назад

Safety Seal tire plugs are all you need. I have used these exclusively for years (I talk a lot about them on my new channel). You can also plug right out to the edge of the shoulder. I can't imagine ever going to a shop to have a tire plug/patched (I wouldn't even consider it).

@AndyFuntown 2 года назад

Thank you for the video Eric!

@davidweidman3169 4 года назад

Good video I've always wondered what the correct repair method was . I will still use plugs though .

@alsafford7143 4 года назад

very informative, great job describing how to do it right

@AntonioClaudioMichael 4 года назад

Great informative video Eric

@dogsbyfire Год назад

Eric, as always, gives thoughtful advice which is carefully researched. Longtime viewer and a subscriber, too. Thank you!

@ArisAriawan657 3 года назад

ERIC your video is so ADDICTIVE !!!

@screamcheese2464 4 года назад

During the pandemic, I miss doing work like this My shop had to close down. I had to get a different job. Pretty close to what I used to do. Great video as always 👍

@ericthecarguy 4 года назад

Sorry to hear about your job. Thanks for the comment and stay safe.

@btrswt35 4 года назад

As a DIY'er I've used plugs for years. I only ever had one fail because of the location. So as a temp solution to get where your going, I wouldn't worry about it not working.

@vijayantgovender2045 4 года назад

Thank Eric I enjoy watching your videos I am from South Africa

@stuntcardriver 4 года назад

I buff the tire, then spray the pre-buffing spray let it sit 30 seconds and then scrape it off.

@DS-TRUCKS 4 года назад

Yea 😬

@oldvetwhotravels.5326 2 года назад

BROTHER. I wish people actually did that! Good video.

@Andrew-zv4fm 4 года назад

I feel like I am watching The Joy Of Painting with Bob Ross. But it is The Joy of Auto Repair with Eric the Car Guy.

@jefferyepstein9210 4 года назад

I bought a new set of tires long ago for a car I had. The first night after I got them someone poked holes in the sidewalls of all my new tires. I was sick to say the least. I had no choice but to plug them. All 38 of them. My tires looked like they had roots growing out the sides of them. I drove them for two years like that without issue. The car is sitting at a friend’s house to this day and has for several years now. The tires are still holding air.

@MHSDankusPotatus 4 года назад

I'm terrified yet intrigued

@stevec6642 8 месяцев назад

Best tire patch I’ve seen yet. How do I do this on the side of the road?

@paulkim1763 10 месяцев назад

You’re the best Thanks

@vee4410 4 года назад

Thanks for another informative video Eric. Not sure why people are making an issue of not having a tire machine.

@chrisnelson3691 2 года назад

I encourage all to try and remove a tire from a rim without a machine, it will really brighten up your day, bring your family because it is a fun filled adventure.

@nestorroman2694 4 года назад

WOW! Very professional ETCG1! Unfortunately I would have to use your 1st method (plug) because I don't have a tire/wheel separator in my driveway.

@jaimedpcaus1 3 года назад

Very nice. Thank you for sharing.

@jacobbogardus6006 Год назад

Thanks very useful information.

@TheBraveheart55 4 года назад

Excellent video!!! Thank you very much!!!

@joem13yearsago73 2 года назад

I loved this hole in tire video!

@PuerinTheHunter Год назад

Great instructions!

@GeometryWars 4 года назад

Enjoyed the video!

@dankk4265 Год назад

Excellent Video

@AndyKingCo 2 года назад

Amazing video thank you very much

@pteamg 3 года назад

Perfect job, well done

@alexboudreau5292 3 года назад

I put the rubber cement directly on the plug, it kind of helps it "melt" on the tire. Also you should go around the patch with the grooving tool, that is what helps with the sealing. Putting bead sealer on top of it is good idea that I also use.

@kleintjk 2 года назад

Great video. Thanks

@forevercomputing 4 года назад

Love the "slo-mo" action of hitting the tyre there.

@mikekilian5403 4 года назад

Great tip. Thank you.

@samthai818 Год назад

Now I know why my last tire repair on my Sequoia costed $55. The tire was a $240 Michelin so it was worth it to repair. If the repair costs more than 1/3, I may opt to replace the tire.

@thomasgarrison3949 3 года назад

Thanks for the info. I am using a tire plug on the sidewall of my riding lawnmower tire. If I need to have a tire repaired on my highway speed vehicles, I take my tires to my local tire shop, for only a few $ they repair my tires.