How to put ExpressLRS 3.0 on your Tiny Whoop (SPI receiver workaround)

Подписаться 339 тыс.

Просмотров 38 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
My ExpressLRS 3.0 overview video is - • ExpressLRS 3.0 full re...
Download the latest nightly build of the BF configurator at - SEE BELOW
Download the "assets.zip" file containing the nightly BF build at - SEE BELOW
EDIT: Dale Larson has built a version of BF 4.3.1 with ELRS 3.0 code built in. I strongly recommend using this instead of the BF 4.4 nightly build, since nightly builds may not be stable. Download the hex files at: github.com/DLLarson/betafligh...
How to configure and work with ELRS SPI receivers - • SPI-based ExpressLRS r...
"Bad size given" error when flashing ELRS 3.0 - • ExpressLRS 3.0 "Bad Si...
---
00:00:00 - SPI receiver + ELRS 3.0 = problem
00:00:59 - You might hesitate to do this
00:01:51 - Some features are left out of this "special" version
00:03:11 - How to download the code
00:03:52 - These are "generic targets". What does that mean?
00:05:10 - How to find your "board-specific" target name
00:06:05 - Always back up your config first!
00:06:15 - Flash the hex file to your FC
00:06:34 - You MUST select the right target name in Betaflight
00:07:33 - Download nightly configurator too
00:08:11 - Does it work????
00:10:29 - Invalid size error

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@JoshuaBardwell Год назад

Dale Larson has built a version of BF 4.3.1 with ELRS 3.0 code built in. I strongly recommend using this instead of the BF 4.4 nightly build, since nightly builds may not be stable. Download the hex files at: github.com/DLLarson/betaflight/releases/tag/BF-4.3.1-with-elrs-3.0

@brandonwoodford579 Год назад

I notice 4.3.1 for elrs right after I watched this for the first time. Thank you for making this great content, that's easy to follow. Im not getting any younger...

@samsonfpv8902 Год назад

Nightly is giving me all kinds of issues. Def not recommend yet

@sberzfly Год назад

thanks joshua for your amazing work, i have fleshed bf 4.3.1 with erls 3 and it works fine

@deroskar Год назад

@@sberzfly i flashed it on a happymodel x12 but im getting no gyro after flashing

@philthayer4087 Год назад

Works great except doesn’t support 100hz full res mode. Hopefully it’s coming!

@Elliot8654 Год назад

Thank you so much!!! I've been struggling with my Mobula6 ELRS all day trying to pair it with my Radiomaster TX12. I was at my wits end wondering if I had a broken tinywhoop. This video got me flying! You're the best (and yes, i did learn something today!)

@devilsreject78 Год назад

THANK YOU i was holding off on updating to 3.0 and now i jst did my MOBULA 7 & DARWIN FREESTYLE HDZERO BUILDS NOW MY WHOLE FLEET IS ELRS 3.0, YOU MAKE STUFF SO EASILY.

@gmivisualsjason3729 Год назад

What fantastic timing I was just about to do this!! Edit: Think il wait for the proper integration into BF

@lemonsquareFPV Год назад

Airmode is different in 4.4 make sure you read how to tune it properly. P integration to I is working well for me, and I love it. I have been running it for a month ish and it is great. 4.4 code changes aren’t super major so I wouldn’t worry too much, but as always be safe and test slowly especially CLI P tuning airmode. Good luck pilots. And thank you amazing developers. ❤❤❤ Thank you JB! Edit: good point! I noticed ELRS3Lua defaults to model match, make sure to turn it off if you don’t use it.

@MCsCreations Год назад

Excellent video, Joshua! Thanks! 😃 Stay safe there with your family! 🖖😊

@Strelinc Год назад

Another helpful video, thank you!

@man0mule Год назад

I just got a mobula 7 1s today and i couldn't get this to work at all. I found that a release candidate just came out today! flashing to that using the daily build of the latest betaflight configurator fixed it. It even lets you put in your binding phrase in the receiver tab!😀

@francofortunato8763 Год назад

worked perfectly! Thanks JB :)

@circleofconfusion8951 Год назад

I really appreciate videos like this one, and it's the sort of video that pushed me over the edge to being a Patron. Thanks especially for answering the question I was about to go hunting the interwebz for: When does BetaFlight 4.4 come out. I'll probably wait until it does assuming November or December since my 2.4ghz whoop and planes are doing just fine for the moment, but it's great to have this in my back pocket if I really want to do something that needs the 3.0 features before then.

@JoshuaBardwell Год назад

Before the end of the year probably. Feature freeze is expected in November.

@JoryFPV Год назад

I'm really glad they worked it out so we could get 3.0 on SPI receivers. The fracture wasn't good for the users or the project. Now we just need Betaflight to release 4.4. =D

@SpartanOfLuxon 10 месяцев назад

Thank you so much Joshua.

@vernelfpv Год назад

thank you for this. i will probably buy the Boxer Radiomaster because of this. This is my issue because most of my HappyModel quads are in v2 ELRS

@MJ-bj1gn Год назад

U are awesome! Thank you!

@voltzFPV Год назад

ELRS is totally the future

@Strelinc Год назад

Agree 👍

@MCsCreations Год назад

Nope. It's the present already!

@maximillionthermidorfirefl4103 Год назад

agreed 100%

@AirKhanFPV Год назад

Looking for exactly this!

@sketchpv3080 Год назад

Cool! I thought the “fix” was going to be to solder on an external receiver!

@edcbabc Год назад

Seems to me this is a big flaw in SPI ELRS - it's a moving target. Presumably it will happen again at 3 to 4, and so on, because it is under continual development. I'm considering building a 75mm whoop at the moment, and one of my criteria will be to use a NoRX board and an external ELRS RX - or just stick to FrSky onboard versions.

@CostaFPV Год назад

This is Wonderful \o/

@juliannojungle Год назад

Can't use betaflight over wi-fi on spi? So, spi is a total no-no! Thanks, JB! Learned something today!

@Floh545 Год назад

Killed my new 1S F4ELRS V1 trying to switch. Can't recommend trying !!!!

@roylim1570 Год назад

Hi Josh, I was wondering if they have an ELRSv3 to flash the receiver? Instead of doing nightly builds

@darkknightz6661 Год назад

Can 4.4 run 2.5.1 elrs? I'm having some weird issues in 4.3.1my gyro doesn't work and elrs does but in 4.3.2 the gyro comes back but then elrs has an error in cli. I've managed to get both elrs and gyro working on 4.4 but can't get it to bind. Running 2.5.1 on my zorro would upgrading to the newest elrs solve my issue?

@youtubxkip Год назад

Oh, i just came across this video in my suggestions... Few days after i solved it for moblite7 that i just received. First off all i wasted 2 hours trying to bind it and trying to learn what happens, but then when i realized what happens, I just took old tx module to tx16s and flushed elrs2 on it. I decided to not take nightly builds. This is old video, older than i expected. BF is still not released :(

@xORLOCKx Год назад

I'm just gonna stay at 2.5.1 till a legit version comes up. If I can't flash all my quads then it's not ready imo. I have a long range 4 inch, a freestyle 3.5, a 2 in toothpick and a nano explorer. So I really don't mind waiting around till betaflight 4.4 comes out.

@BrandonBeans Год назад

I think this should be updated because Betaflight 4.4 is in rc2 currently and very close to release. Edit: I posted this 5 days ago and its been in RC3 for 2 of those days at least. Just around the corner!

@ntas4353 Год назад

JB I need to learn where your intro clip went... Today! 😁

@timmcwilliams Год назад

My Meteor 65 (2022) has F4 1S 5A Serial ELRS V2.0 FC. It won't let me add to the CLI. Is this what this video addresses? Thankk you.

@fpvbersila4524 Год назад

Another great video, thumbs up, I successfully flashed the larson file and my Mobula 7 1S is bind to the elrs V3. When I tried the same thing for meteor 85 2022 hdzero, bam I got no gyro, I flashed with the betaflight_4.3.1_BETAFPVF4SX1280 hex file. What am I doing wrong here?

@fpvbersila4524 Год назад

Thanks for your input josh, I upgraded to 4.4 and now I get elrs V3 on the meteor85 2022

@TheHelicapt 6 месяцев назад

Would I need to follow this procedure to update my Mobula 8 with built in Elrs ?

@omar.p3rez Год назад

I’m looking for a moblite 7 with elrs but I only find the frsky version 😢

@vanlifefpv6340 Год назад

I've tried the nightly build on my Meteor65 and it doesn't fly as good as before and my range is about 25 meters before I get a failsafe. I was able to fly a lot further on 2.x.

@pfeerick Год назад

Strange... Didn't make any difference to mine (Meteor65 also). Make sure you double check all the ELRS settings on your tx - ie power level isn't different?

@slyfpv Год назад

Help Joshua ,I have put dave larson 431 on my mobeetle diamond f4 elrs spi and now no Gyro ???? ,brand new drone ,i have tried to go back flahing it to a stable relese and still no gyro ? Cna you help me ?

@RCRitterFPV Год назад

Been stressing... My 2.4 flash was corrupted.. was trying to get 2.51 working... just staring at 3.0... "Learning something today"

@user-is8po7cu5u 5 месяцев назад

hey Josua, i have a jr 10x radio, i buy a emax elrs module but i dont know how can i work, flashing like bind but in beta fly dosent work, after 60 seconds star the wi fi mode, can you help me?

@mrbonus8423 Год назад

My DJI goggles V2 just started displaying "image transmission signal lost". This is with the GepRC cinelog35. Do you have a video on that or possibly make one?

@JoshuaBardwell Год назад

You have lost link to your video transmitter. Check the video transmitter: is the LED on? Is it green? Is the vTX powered up? Does the link come back if you get closer to the quad or is it all times the link is gone? If you want to email me joshuabardwell@gmail.com those are the questions I would start a troubleshoot with.

@johngreen5837 Год назад

You know I'm not good at this, so I've been putting it off. If I screw it up, would you fix it and take a rack of baby back ribs for payment?

@rabunfpv Год назад

how about tmotor f4 aio 6A..... what work with this firmware

@JohnSmith_1331 Год назад

mobula 6 elrs, can't get it to flash the firmware. It says 'rebooting to rom bootloader' then 'failed to open serial port' It's not a port issue, I can connect to it just fine. It seems something goes wrong in the rom bootloader. Any help would be greatly appreciated. Edit: It was a driver problem. Apparently when it boots into bootloader mode it requires the installation of another copy of the driver software for that specific connection. Ended up just using Zadig to install it.

@jmhern0818 5 месяцев назад

haha thank you! I recently got a bubito from Rotor Riot and have been trying to get it to work with my Pocket radio! This seemed to do the trick! Thanks!

@oscarbergeson7478 Год назад

my mobula 7 1s seems to be in a "beginner" mode where i cant pitch/roll more then about 20 degrees. how do I change/ disable this in betaflight?

@JoshuaBardwell Год назад

It seems like you have Angle mode activated. Most likely there is a switch on your controller that will disable Angle mode. Plug in to Betaflight configurator, go to the Modes tab. You should see that Angle mode is yellow indicating active. Flip the switches on your controller until Angle mode turns off (goes gray). If you need to manually set up an aux mode, here's how: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-feObDe54wKw.html&ab_channel=JoshuaBardwell

@k1ortia Год назад

All i keep getting is, Rebooting to Rom Loader. And im unable to flash or bind My Happymodel Bassline. Any ideas? cheers

@badFPView Год назад

Hi Joshua. I am new this things. So may be i ask stupid question but can i bind mobula7 frsky wth R9M?

@juliankeller1751 Год назад

@dpkgray Год назад

Yup already I did this to a mobula 7 1s and a Happymodel Crux NLR with zero problems, but remember the firmware is beta (with all the attended risks).

@sendorm Год назад

This code has already been merged into the nightly builds of 4.4. That assets file is not needed anymore. You can see the "merged" on the Pull request page.

@Rizz1117 Год назад

When I flash with BF my rx wont bind. Works fine with assets file tho 🤷🏽‍♂️

@pfeerick Год назад

@@Rizz1117 you need to be flashing a development build or nightly build still I flashed both this and the nightly from a couple days after it was merged and both worked for me.

@rcrdps8144 Год назад

Currently debating on staying with the DJI radios, or switching to ELRS. I started with QX7, and toyed with a X9 Lite, but gave both of those away when I started flying the DJI v1 radio. Super long battery life, button integration with goggles, and no reciever needed for my whoop conversions. But now with v3 AU coming, it's unknown if it will support DJI RC2, and RC2 doesn't have the button integration with the goggles. I may be building mostly new quads and getting rid of the current ones along with the v1 controller and v1 goggles. My Goggles 2 should connect to the Vistas (eventually), but my v1 RC likely won't connect to the v3 AU. So this is my interest in your ELRS SPI video. My most recent build has an ELRS SPI reciever on the whoop board. I didn't use it, but it should be fairly easy to swap over to. What's funny is the DJI v1 radio used to seem ultra expensive, but now when I look at ELRS radios to replace it, the DJI RC2 is actually on the cheaper side. EDIT: I see I was just mostly noticing all of the different TX16 models. There's several other transmitters in the $100 range.

@pfeerick Год назад

One thing to keep in mind with the TX16S is there is a reasonable price range, depending how premium you want to equip it. I. E. All metal gimbals + CNC parts is more expensive than standard hall gimbals and plastics. There are some good brands and TX designs, but I personally would stick with RM due the R&D they are putting in, and the support they offer. Self-build can be expensive, but in the long run I think it's cheaper and you have a better idea how it all works, and can maintain your gear better because of that.

@rcrdps8144 Год назад

@@pfeerick The lowest I saw for a tx16 was $200,...which is about "ok". I did see the Zoro is reasonably priced. Also the TX12. I don't really care much for bling. Hal gimbals would be about as much as I'd spring for. Do you mean self build drones, or radio? I definitely do plenty on the drone side. Some are more like "rebuild" or conversions,... But I just found I didn't really need Amber or Lua in my radio. Nor do I "need" ELRS or 900mhz to have a link more stable than video. The DJI radio holds solid when the video Mbit is in the low single digits. But it might be time to change if the winds(compatibility) aren't blowing right for me to stay DJI.

@pfeerick Год назад

@@rcrdps8144 Self-build drones - I'm not so much into self-build on the TX side, but I do know one person who designed and built TX and RXs from scratch... and some of the ELRS guys are into designing custom handsets. Yeah, unfortunately prices have been going up... I'm it was around $180USD or even a bit less when I got it ... that was a couple years ago now though! 😆 If you don't want color touchscreen... TX12 is probably the best radio to get unless you prefer gamepad form-factor - since you can use standard 18650 or even the 5000mah pack with the TX12MK2. And you don't sacrifice sound or Lua either, which you do sort of need since you use it to configure the ELRS link, and you can also tweak BF parameters using the BF Lua. As far as DJI, time will tell, it's early days still, but good to keep a finger on the pulse for other stuff so if they become too restrictive you'll know which way to jump ;)

@rcrdps8144 Год назад

@@pfeerick Thanks for the recommendation. I did watch some more videos last night, and I think I'm pretty set on switching to ELRS. And I've definitely been eyeballing the TX12. Need to watch some reviews on that one today. The DJI v1 RC is kinda smaller in the hands, and when I had the X9 lite, I liked the way it felt too. So I think I'd like the TX12.

@JMMR671 10 месяцев назад

Please help. I can’t bind tinyape to pocket radio

@xChodios Год назад

my betaflight will not flash a local hex file it just sits there and doesnt load

@deanrandazzo600 Год назад

I flashed with the 4.3.1 version as suggested in the update, although following flashing i can't connect the drone (mobula 6) to betaflight and apply customer defaults. Has anyone else experienced this and found a solution?

@deanrandazzo600 Год назад

Nevermind appears that i flashed the wrong betaflight build - there's no version for the 'CRAZYBEEF4FR' only 'CRAZYBEEF4SX1280' (which i flashed with). I will try again with the betaflight_4.3.1_STM32F411.hex

@Dimensas 9 месяцев назад

Great tutorial. But still need help. I followed you till the momen when you added a command in CLI window. I wrote " get expresslrs". And I got "###ERROR IN get: INVALID NAME###" I tried other commands related with ESLR, but nothing.

@JoshuaBardwell 9 месяцев назад

That means your flight controller has serial-based ELRS not SPI-based.

@MarkusLutz1504 Год назад

Had to use a CLI dump on some of my whoops (hamo and betafpv) after flashing generic hex files. The "regular" configurator GUI backup/restore does not contain all relevant settings! Also, but that has nothing to do with the above, just mentioning: I have two Mobeetle6, but on one the BMI270 (gyro) seems to be defect. After reaching about 55°C core temp it starts to become unflyable, introducing very heavy drift and jitter in the gyro sensor signal. The interesting fact is, that this behaves different on two identical models. Same HW, same FW, same config. One HAMO board is ok, even over 60°, the other is only flyable below 55... Already wrote this to HAMO, they will send me a replacement board. And no - i did not damage the gyro with the kown BF RC6 bug... ;)

@JoshuaBardwell Год назад

If you flash with the correct target selected in the pulldown menu, then "apply custom defaults," the correct configuration will be applied.

@MarkusLutz1504 Год назад

@@JoshuaBardwell thx for the reply, but no, this was not the case for me! I cannot tell you why, because I did not try to reproduce. I flash almost on a daily basis (FC and ESC if needed) if I have the time, own over 50 quads in the meanwhile (which is the reason for my regular flashing), and that occurred "only" 3 times within the last month. One of the first things I do when receiving a new whoop is to make a FULL backup of its config (CLI dump), and this has proven beeing useful sometimes... DIY builds are a different thing, but especially these SX1280 spi based FC's are a nightmare sometimes...

@stevebienkens38 Год назад

Any idea if this works for binding to eu-lbt radios? Or id there is an option to flash a bf version that supports eu-lbt? If not i’ll just fly illegally 😂

@eowhiskass Год назад

i'd like to know how to get expressLRS 3.0 on my LiteRadio TX....

@JoshuaBardwell Год назад

I don't think it's possible unless you have the Pro. Betafpv has not made it possible.

@fate2452 Год назад

Is it possible to put crossfire to a tiny whoop? Really want to try that

@zachmachina Год назад

Yes. You do it the same way you put it on any drone.

@Halphbaked210 11 месяцев назад

Newbeedrone has crossfire built in now

@wooler78 Год назад

What’s the best module to get for the xd9+ ?

@dansmith9406 Год назад

Go for the frsky r9m if you can get hold of it and flash express LRS to it

@JoshuaBardwell Год назад

Happymodel Pro is my recommendation. FrSky R9 does not have an EP chip and cannot do Wifi stuff so I wouldn't use it.

@martianmcfly Год назад

Guys I'd be VERY hesitant to do this if you're running the BetaFPV ELRS 1S board with the old "Gyro" yaw issue. I had worked around and had the board running fine on 4.3. Updated to 4.4 to have the latest ELRS 3.0 firmware. Ended up rolling back to ELRS 2.5.1 & Betaflight 4.3 as i didn't like the feel of 4.4 and BAM. Dead Gyro! PLEASE BE CAREFUL! 👽

@Floh545 Год назад

Hey ! I think i killed my board with that 😢😢😢 Could you explain the issues to me? No work arrounds here?

@martianmcfly Год назад

@@Floh545 If you have no response from the yaw then i'm afraid it's dead. If you do try and fly it, it will just keep yawing uncontrollably... I've tried many ways to try and fix it but nothing works

@jonathanmcwhorter1353 Год назад

Recalibrate in setup. also check channel mapping

@fpvbersila4524 Год назад

I ran into the same prob on the meteor 85 2022 hdzero bf says no gyro, I reflash 4.3.1 on bf and the gyro is working again but I cant bind with elrs V3, so now I'm stuck

@fpvbersila4524 Год назад

update as per Joshuas input, upgrade to 4.4 and itt fixes everything

@FluffRat Год назад

All this time I've been reading it as "crazy beef"...

@shareobj Год назад

Unfotunately, I can't upgrade my Mobula 7 HD up to Elrs3.0. I use internal SPI RX (FrSky_D D8). When I've started upgrade on my Jumper T16 TX it shows "Not enough space". So I user Elrs 2.5.1 on TX and write it on RXs.

@JoshuaBardwell Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2kcRi1cHejM.html This is the fix

@shareobj Год назад

@@JoshuaBardwell thank you very much, I'll try to do it.

@sykkel_martin Год назад

Trying this on my mobula 7, but after flashing, drone fly's away after arming no matter what I do. Anyone had similar issues?

@jonathanmcwhorter1353 Год назад

yes! any solutions?

@jaysonrees738 Год назад

It has taken entirely too long to get SPI ELRS upgraded on BF. Has been holding me back from building tiny things because I refuse to buy more FrSky stuff.

@dansmith9406 Год назад

Can I put expresslrs on the mobula7?! Do I need a new rx?

@JoshuaBardwell Год назад

If your Mobula7 doesn't have built in ELRS, yes you need a new RX.

@dmleventhal Год назад

As an add on, if buying a Mob 7,would you recommend buying the on board elrs one? Or adding an external RX to a different board? Seems like the spi part is an issue?

@bunnykiller Год назад

4.4.2 has been released and it still doesnt work..... ELRS 900 flashes one way and ELRS915 a totally different way one uses BF pass thru or FTDL(?) and the other is WiFi or USB ( if you are lucky enuf to get wifi to show up) Ive tried every combination and no joy... BF will flash the FC, but ELRS cant find the Rx on the FC, so no Rx flashing is going to happen, the built in Rx was a bad idea, BF sez its a serial but happy model sez its SPI and the mobula6 box sez its a 900 and on the other side of the box it sez its 915... so basically there are 10 different combinations to choose from to flash and plus the boot button on the FC broke and I had to solder wires to replace it, now I have 2 wires sticking up that need to touch each other when it comes time to "boot" mode it... the only thing this is good for at the moment is a FPV transmitter... maybe Ill hot glue the FC to my 35$ cheap quad and have working FPV for it...

@pfeerick Год назад

That's not really a nightly, more a test build. You can flash a nightly directly from BF Configurator without downloading a firmware, just need to tick thr devdlopmenf/expert mode opts in the firmware flasher. But that PR build is a better one to get a bunch of people to use, and report issues with. I. E. A fixed point in time, rather than a moving target (which nightly? What else has been changed?) And if we're talking whoops here.. They bounce well! 🤣

@alperenozgur Год назад

We need ELRS video 😖

@xmonstar420x Год назад

Second!

@wingsuitist Год назад

0:55 I'm Ron Burgundy?

@KwongKan Год назад

Met some dude who thought he's so smart that a T-Lite with built-in ELRS paired with a Mobula 6 would work together, so he could have the newer flashier compact radio running cutting-edge ELRS 3 (RC1) and a compact drone with SPI RX to save some weight - NOPE. - 2.x FW does not exist for the built-in module - SPI RX (on BF 4.3.x) doesn't work with ELRS 3.x He ended up adding an EXTERNAL RX

@AndrewHollywood Год назад

First !!

@creationlabsinc.189 Год назад

🍪

@Rglass-xu5zq Год назад

my first elrs experience was realy bad ep2 receiver bad flash could not fix it in any way. elrs= burning money

@JoshuaBardwell Год назад

Typically a bootloader flash via ftdi adapter or Betaflight passthrough is how to recover from a bad flash.

@absolutecarpetcare Год назад

And we want to switch to this from crossfire why? 😂 🎉

@JoshuaBardwell Год назад

If that's a serious question, ask the people who switched. But I don't think it is.

@garetolsen Год назад

lol...DVDA🤣🤣🤣

@Terry12345 Год назад

It's hard not to spit every time I hear the word ExpressLRS! Buggy software, junk equipment and an upgrade that causes a whole bunch of new problems that didn't fix the old one's. All this grief over a receiver. IMO it makes FRsky D8 look damn charming in comparison. At least the D8 would fly across the yard before it lost signal and fell out of the sky. This BS ELRS can't seem to make it away from the computer table 😒

@JoshuaBardwell Год назад

If you're not getting miles of range from ELRS, something surely isn't right about your system. I couldn't guess what that could be, but it's hardly the norm. "Buggy software?" IDK what you count as a bug, but I'm not aware of any that made it into a final release. But sure -- it's an open source project that moves fast. If that's not your style, ELRS isn't for you.

@Terry12345 Год назад

@@JoshuaBardwell it's definitely not for me. I would rather spend my free time flying than sitting at a computer scratching my head wondering what to try next to make the last error message to go away 🙃.

@mouseFPV Год назад

Your experience is unique. ELRS has been nothing short of amazing for basically everyone.

@pfeerick Год назад

That is certainly not the norm. Is it more complex than other systems - yes, at times. Does it have its own way of doing things - yes, just like every other system. Does it generally just work - yes. Most of the problems with ELRS stem from naufacfurer QC (or lack thereof) and provisioning, sheer back luck, or failure to read the instructions properly. I. E. There is a 2.0 => 3.0 upgrade issue - which stems from how some manufacturers initially flashed the firmware. There are failsafe issues from how some manufacturers configured the reference frequency crystal oscillators. But all of this is documented, and as long as you don't jump to be the first cab off the rank, all this information is available.

@chadstinar7621 Год назад

@@JoshuaBardwell Moves fast, yes. I"m here 4 months after most of this discussion wondering if anything has changed. I could have sworn there was a 4.4 hex file offered on the Happymodel web site, but now I can't find it, so I'll try the 4.3.1 file you recommend in your pinned comment above. Per your BF video series, I have the latest BF Configurator 10.9.0 RC5 and 4.3.2 firmware on my X12 AIO.

@mouseFPV Год назад

Way to early to be recommending flashing 4.4, irresponsibly so IMO. Current discussion from Chris Thompson in the testers channel on BF discord "- The BAD one: with the latest master code, I got random D 'grinding' and flyaways on arming, and occasionally mid-flight. Log shows extreme resonance on roll, happening randomly. This is on a quad that has never, ever, had this issue. The older master code (from before some recent PR's) has been entirely problem free. It may only be a problem on my F411 board with CPU load or something, not sure." Guys this is an exciting feature but we need to wait until we are closer to the feature freeze to recommend people go flashing nightlies and literally pre-alpha hexes 🤦🫣

@JoshuaBardwell Год назад

I'm explicitly NOT recommending it. I'm saying, if you accept the risk and want to try it, here's how. Look at timestamp 0:59

@mouseFPV Год назад

@@JoshuaBardwell sorry, not necessarily directed solely at you. Look at your comment section though. "No need for the asset folder anymore, just flash master" and such. Though, ironically, the asset folder from the PR is seemingly safer than current master... ItsBuntly literally had a rant about this on the news with your face on the screen when we were in the *RC* phase of 4.3.... This video is how we end up in that place, or do you not see that?