How To Refinish Carbon Fiber Like A Pro ***FAST AND EASY AT HOME*** 

No questions. Just a 👍for saying you will answer any questions and you did. Unlike many other's that say they will but never do.

Thank you for every instruccion in the video!

Gonna try this on some diffusers we made very poorly last year. I am worried there is too much peeling and delamination for it to look decent. Surely it will look better than it does now though. Thanks for the vid.

Masterpiece 🎉🎉🎉 TYVM Boss 😮

Not a bad video. Any time your doin' body work u should wear a respirator. It would be cool if u shown the finish product. I know someone that would buy that hood.

Great video, I've just picked up a second hand carbon bonnet with very slight clouding. Im going to use my da with a 5 inch foam backing pad and 600 or 800 grit sandpaper and then use a 2k clear coat or take it to get clear coated professionally. Thanks for the video.

Great work, i just dont like the word 'i know what i'm doing'

Question?? My carbon fiber hood isnt thst bad, but I can begin to see that foggy effect on the hood, I use wet sand at 3000 sand, but how many times should i sand it?? And when ur done with the clear coat? I have to resand the clear coat as well?? Help please??

Hello! First of all, awesome video, super informative!, I know this video was uploaded like 4 years ago but hope you can help me, my hood has a very very small crack on the clear coat like a half of an inch size or smaller (also it's faded) so I going to try to restore it. My question is, any recommendations about the crack, I saw a couple of videos where they use epoxic resin on the cracks..but I'm not experienced using it. Do you think that the sand it process and reclear will fill the tiny crack? Thanks!! Regards from Zapopan México !

What if it has a crack, do I need a resin and hardener to cure it again? Do you know whats the ration for those? Thanks. Good work btw

Can you make a video on how to fix the cracks in a cf hood. Please, thank you. Very informative & good work

I know this is super old video but I have issues where believe my clear coat is peeling in sheets what grit sandpaper should I start at I tried 600 but it didn't seem to work

Hi, my clear has started to peel of in some spots. It is factory clear coat. I can push a knife blade between clear coat and push it between clear and carbon even were it looks good. How should I go on with that? To me It seams like factory clear coat has not bonded with carbon resin. I am afraid that when I put new clear on that it will just be a matter of time before old clear starts to peel in new spots.

Thanks for the video! Any tips on getting rid of bubbles/bulges in the gel coat? I bought a hood that has a quarter sized bulge of epoxy in the middle of the hood

if I go down to the carbon fiber will the clear coat hold well? or should I add a step?

Great video thanks for sharing.

Would you recommend doing this with regular sand paper by hand and if so would you have any tips

My hood is starting to fade it's a hellcat hood what can I do to bring the luster back without sanding it down and re clear coating it

I'm refinishing my 95 neon carbon hood. It had decent sized cracks in it which I fixed with resin. I sanded quite a bit and it feels smooth to the touch and looks smooth but when I put water on it I can see small cloudy spots here and there. Do I need to sand more in those areas? I'd hate to clear it and have to sand it all back off again.

What setting did you use for the orbital sander ? Meny thanks for video

Any tips for a carbon hood that is yellowing really bad ?

I recently bought a 1997 Honda prelude with a carbon fiber hood and there are white spots all over it , some are a bit faded but some are really white , water doesn’t do anything , what should I do

Nice job n thanks for the tips,

Im gonna do my hood tomorrow by hand! So don’t wet sand it? Just keep the sand paper and hood dry?

how do you know when to stop sanding ? also how do you know if you have reached the carbon?

I have the same cracks on my hood. How would you go on from fixing it?

Can you make a video on how to fix a spray can clear cost. Do you just wet sand with high grit?

thank you

Do you have an email? I want to send you a vid of my Carbon fiber spoiler , if you see the damage you can maybe recommend how to fix it , thanks for sharing

What type of clear coat do you recommend?

Hi , do you have an email I could shot you an email to ask some questions about carbon fiber?

Wow very good. Im having trouble getting my carbon fiber hood right. My current video of how bad it is I posted on my channel, can you check it out and let me know what you think I should do step wise to get it right. I have these white lines... Thanks.

Is this a sticker type?

Hi! So you just dry sanded it? Or do you need to wet sand?

Wait so you apply clear coat with a spray bottle?

I have a carbon fiber hood that someone badly spray painted. I've gotten a corner of the paint off just by wetsanding. Is there anything your would recommend to remove that paint that might work a bit better or quicker?

What would you recommend to remove water spots I have a carbon fiber hood

A carbon hood for a 1997 sunfire? The hood is worth more than the car lol

Wear a respirator! So many videos of people not wearing protective gear taking years of their lives! Spend the money on a good respirator and appropriate filters and save your lungs!

Hello, does anyone do this type of work in the NYC area?

Make a video how to restore fingernails and fingers.

I got the same hood and I did not sand nothing just use LUKAT kit 59 bucks in your hood will completely restored itself you do not sand carbon Fiber

Just what i want to watch. First thing he says is basically, im going to do a half ass job. No thanks

Ha ha ha ha haaaaaaaaa! Seriously!

working with epoxy without any mask and gloves.. you don't know what you are doing ;)