How to remove a security ink tag from clothes

Подписаться 595

Просмотров 52 тыс.

50% 1

This ink tag was shipped with the ink tag attached to the shirt and the local outlet store couldnt remove the tag.
I'm not posting this for fraud reasons but it is the second time a security tag was left on clothes we bought and I'm sure it has happened to other people...I was not going to ship it back for them to remove it.

Авто/Мото

Опубликовано:

27 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@Teerizz3-up8e Год назад

Thank you so much. I did exactly what you said and it worked. Not only did I follow your way of detaching the alarm but your sons story is exactly what happened to my son. They mailed it without removing the alarm. For months I did not attempt to remove the alarm. I went as far as going to three Finish line stores and all they told me that i had to go to the state in which it was mailed from because the finish lines I went to had the old alarm set ups and this store was one of the newer ones to open. I didn’t want to catch a plane so I left it in the draw the way it was until I ran into your video. Low and behold after watching 6 videos to see which action was the best one I went with yours. It worked. PERFECTLY. THANKS. !!!!!

@MarcsRandomVids Год назад

I'm glad it worked. I'm starting to think that wherever the clothes get shipped from that they don't have the device to remove the tag either, so the let it be the customers problem

@dabaddestdj2010 7 месяцев назад

This just happened to me on a nike item from guess where…Finishline smh…gonna try this method

@beauhobden8844 2 года назад

This worked well, once i got the first side off i sticky taped the ink vials while i filed down the pin incase it leaked since i didn’t have time to freeze it. The people at the shop forgot to remove the tag and i live over an hour away from the store.

@NYjetlife Год назад

Same story. bought a GSW jersey for my son from London and now im in US. I will try later. Thank you

@jeanlucbailly9428 2 года назад

Better use 6 small screws instead of nails: then a lot easier to remove even without spanner...

@jonnysaxon 10 месяцев назад

Thanks for this video and the comments. One small screw into one of the holes did the trick. We chose a hole that didn’t have ink below it (don’t think it matters which one though). Screw was slightly larger than the hole.

@MarcsRandomVids 10 месяцев назад

Lots of ideas here. Thanks

@hennayas9031 7 месяцев назад

Hey how'd u get the screw in?

@hennayas9031 7 месяцев назад

Screw it in? Or just prod it in? Also what kinda screw did you use?

@jonnysaxon 7 месяцев назад

@@hennayas9031 screwed it in. Just any screw will do around the same size as the hole (one I was used larger than the hole). I only screwed in a couple of mm and it released the tag

@MohamedBoulesbaa-nq9il 6 месяцев назад

I've just done the same what you said by screwing one hole between the the red & blue and it comes off in 4 sec xxx Thank you so much You're a super star 👌👌

@codycant5916 Год назад

awsome stuff mate I got straight on the Dremel after I watched this and the tag was off in minutes

@MarcsRandomVids Год назад

Glad it helped!

@rakeau 7 месяцев назад

Have encountered one of these, unfortunately not having any luck. I can’t see any gold bits under that lip (I assume that’s where the removal tool hooks onto), and if I try pressing down in those 6 holes with something (as much as I’m comfortable doing anyway) I’m not getting any feedback. Would really need to understand how it actually works and how the proper tool works, but not found any resources so far..

@MarcsRandomVids 7 месяцев назад

Hi,,I wouldn't buy the tool because it's basically a one time thing, hopefully. Read the comments below as some people had great ideas that worked. My best suggestion to you would be either take it back to the store, if you can, or freeze it. Once it's frozen you can crack the plastic,, do it quickly though.

@rakeau 7 месяцев назад

@@MarcsRandomVids Thanks for the reply. Yeah of course I'm not going to buy the tool for one item, just annoyed the inconvenience! I'm more just curious how the proper tool works - I'm guessing it hooks onto that bit and has 6 pins that push down into the holes... Or I could just do your initial thing and dremel away the middle of the side that doesn't have the ink vials.

@MarcsRandomVids 7 месяцев назад

@rakeau that's why i used the dremel. Unlocking it didn't work. I'm not sure of the name of the locking method, but picture a thin metal cone with a hole in the tip just slightly smaller than the pin. If you push the pin through the hole from inside of the cone, the cone metal binds against the pin. Trying to pull the pin back out only causes the cone metal to dig in deeper around the pin. You could still push the pin through, but not pulling it out. To release the pressure, the cone must be pushed from the inside. Almost like the stud of an earing, or a lapel pin with the button on the back. Freeze it first. Lol. Hope that helped.. ?

@rakeau 7 месяцев назад

@@MarcsRandomVids Yep, makes sense, I'm just not sure how somehow puncturing the tag thru some of the 6 holes on the other side (the side with the vials) will release the grip of the "cone" on the other half that you're talking about. Encountered another tag once before, but that was easily released with a strong magnet. The bit on that one that 'grips' the pin used small bearings that the magnet would lift up. But this one sadly is different. A magnet will stick to it, but not release it.

@MarcsRandomVids 7 месяцев назад

@rakeau I like the magnet idea. It's been a while and even though I just watched the video,,I still don't remember exactly what I was talking about. I think.....using the dremel, bypassed the need for the six holes. So the pin I was left with was still stuck in the lock. I think I just freed up the opposite end. Maybe you can experiment more. Dissect it better than I did.

@julianv2122 2 года назад

I bought socks 2 days ago in the Netherlands but now I’m back in Germany and it also has that lock. I hope it works

@MarcsRandomVids 2 года назад

It works. Freeze it. Good luck.

@julianv2122 2 года назад

@@MarcsRandomVids i did the first method just without such a machine. I rubbed of the plastic with a knife and a lighter now i can see the top of the silver button. What do i do from here? I can't pull it out? Do i need to cut the silver head off?

@MarcsRandomVids 2 года назад

@@julianv2122 it should have just separated since the plastic is no longer being held by the silver "nail". Whatever you try....freeze it. Then crack the unit in half,,quickly!

@MarcsRandomVids 2 года назад

@@julianv2122 or,,,keep heating the knife up and continue removing as much plastic as possible .

@Escekar Год назад

Can you do another test but this timefind the most effective way to unlock it..! Please.

@MarcsRandomVids Год назад

A store hasn't left one on since I made this video. I think the most effective way depends on how many you need to remove. Just read the comments, they will give you good ideas to try.

@Escekar Год назад

@@MarcsRandomVids no worries. It’s a interesting device. Magnet don’t seem to work with this on..

@Clr-Clr Год назад

Every video I've seen about taking these off has been doing it the wrong way and the hard way! Just use a hook screw and screw it into one of the holes you see and bam it pops off. I had bought some socks and there was 3 tags still on. No power tools or knives used just a hook screw

@MarcsRandomVids Год назад

Interesting. I hope I don't need to try it again.

@Clr-Clr Год назад

@@MarcsRandomVids well you never know with all these young dumb apprentices, they didn't know socks even had tags

@MarcsRandomVids Год назад

Expensive socks lol

@Clr-Clr Год назад

@@MarcsRandomVids just Nike ones, I saw that there was one tag still on when I got home so I took it off then realised there's 2 more. I guess people steal them a lot

@MarcsRandomVids Год назад

They say socks are the things homeless people ask for the most. Maybe Nike socks are a hit with them.

@aries_empress_2163 2 года назад

The easiest way to remove these! Is to get a torch lighter melt the side without the ink first move the plastic around while the plastic is still warm and make a whole do the same to the other side and it just falls off!

@MarcsRandomVids 2 года назад

That works. I was going to use a soldering iron.

@ohsolovable29 9 месяцев назад

That worked great! Thanks

@spazz2236 Год назад

Wouldn’t a magnet work on that type

@MarcsRandomVids Год назад

No, the magnet wouldn't work. I believe the pin is being held by metal that is "biting" on the sides of the pin. If you google "push nuts" you can get an idea of how it is holding.

@michaelh9042 Год назад

I was bought PJ's for Xmas and just decided to use them and found this tag attached to the inside😢 typical they've been sitting in a gift bag since last year. Anyway watched this vid but decided to try one of your viewers recommendations using a small screw through one of the holes. It only took one screw and the back fell off. Only issue I now have a hole in the tops front, they didn't put the tag on a seam, idiots

@MarcsRandomVids Год назад

Yeah, they could at least make the pin thinner

@carljensen4180 11 месяцев назад

❤

@levitennapel1286 Год назад

Lmao that’s funny ash

@wefengamer Год назад

Bro shuddap

@jaymebridges1004 Год назад

And it’s give the boosters a step by step guide. 🤦🏼‍♀️

@MarcsRandomVids Год назад

Well, they actually sell tools that remove the ink tags much easier. My method is a lot of work and can still possibly ruin clothes. So for the people who can't have the tag removed , it helps them. What's strange is how some states allow stealing up to $900 from stores. Now we have people running in and robbing whatever they can grab. There are also videos on how to pick locks, remove wheel locks from cars and how to pick pockets....I could go on.