How to remove and re-use the clutch release bearing? Mjet and JTD among others. (not so) Quick Tip!

Подписаться 10 тыс.

Просмотров 69 тыс.

50% 1

Hello guys! Did you need to replace the bearing for a new one? Did you just replaced it and now you have to take out the gearbox again?
Do you need to solve a oil leak? Wether you put a new bearing or reuse the old one, the video info is the same. if you are to maintain the same pressure plate this info can be useful.
Well, i tried but could not do it any faster without leaving out precious information!
I'll try to make the Quick Tips, quick on the future.
About this, for whatever reason it is a good info, i myself use this lot's of times!
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
link to help my channel:
www.paypal.me/...
link to help my channel:
/ alfaromeonoproblem
DMF, Dual-mass flywheel checks and tips, Sachs/Valeo and luk/shafler:
• How to diagnose and pr...
Crankshaft seal quick tip:
• Oil leak! 1.6 | 1.9 | ...
Ac Sytems, faults, solutions and tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspention:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my reaserch of parts: wwww.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #alfa156 #AlfaRomeoNoProblem

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@MrOlcaymeral 3 года назад

Very good way. Thank you for explaining and sharing. The 156 2.5 V6 has the same clutch.

@alfaromeonoproblem 3 года назад

Hello. Thank you very much for watching my video!

@zacktheax5384 Год назад

Thank you for sharing! I accidentally installed my throwout bearing the wrong way!

@alfaromeonoproblem Год назад

Thanks for watching!

@dannydkasel8296 Год назад

M32 Gearbox is a GM Product, used in 159 and Opel ... mostly with LUK Components great Video ...

@alfaromeonoproblem Год назад

Hello. Thanks for watching. M32 is GM yes, but uses Valeo on 159.

@Arbol833 2 года назад

Great trick, thanks to your late friend and you I know how to solve my problem. Tomorrow I'll find out if I manage to repeat the trick, I guess I will. I have a LUK clutch on my Citroen C5 with exactly the same fixing. Greetings!

@alfaromeonoproblem 2 года назад

Hello. Thank you very much! Very good to know this was helpful for you. Keep in touch. See you on the next one!

@beecee1235 Месяц назад

Thanks to you AND your friend.

@naruttaanime9471 17 дней назад

Thanks to friend Zaccaro rip 🙏

@otto75 Год назад

Grazie per il video e ottima spiegazione! Mi è stato molto utile per sostituire il gruppo frizione / volano sulla mia alfa 156 JTD.👍👍👍

@ЯрославЖелтышев-ы1ч Год назад

Спасибо тебе мужик🤝 ебусь с этим подшипником 2й день. Respect! From Russia with love!

@paulofernandes3927 5 месяцев назад

Muito boa dica tive hoje um problema num 156 jtd e vou ter de demonstrar a caixa de novo porque o rolamento nao deve ter ficado corretamente engatado na prensa e o pedal fica muito duro

@alfaromeonoproblem 5 месяцев назад

Olá. Se o pedal está duro mas funciona o problema não é esse. Pedal duro, por norma, é o kit de embreagem errado. Por vezes problemas nos casquilhos ou tubo flexível entre bombas. Tenho isso tudo na descrição. Também em português no outro canal

@PipoZaro Год назад

Thanks for you work and thanks for this information, very important for me and my new project. Regards and best wishes from Copiapó, Chile.

@alfaromeonoproblem Год назад

Hello, thank you very much for watching! Best of luck here from Portugal!

@pelless 2 месяца назад

Thanks for the video. Can you take off the gearbox with sub frame mounted? Or needed to remove the subframe for the gearbox change?

@alfaromeonoproblem 2 месяца назад

Hello. I do have complete videos for the clutch replacement. For what car do you refer?

@pelless 2 месяца назад

@@alfaromeonoproblem yes i seen the another video,but my friend said we dont need to remove the subframe. 147 1.9 8v.

@alfaromeonoproblem 2 месяца назад

@pelless you can try.i myself cannot do it...

@djlosmi 3 года назад

👌 always good videos! BTW I installed a Ducati Corsa clutch (170 Hp version) on my GT JTD regular version. Everything is perfect only the pedal is a bit stiffer, which is probably normal due to stronger pressure plate for the Ducati clutch kit. Maybe someone will find this comment useful :)

@alfaromeonoproblem 3 года назад

Hello. That is a excellent information. Already pin the post to be always the first to appear.

@Evgeni711 2 года назад

Hi guys My Multipla has an 230mm clutch. Is it posible to install 235mm clutch on actual dmf with some adjustment ? I know this is AR chanel. I apologize.

@alfaromeonoproblem 2 года назад

Hello. No need to apologize. All things fiat are welcome! Do not know bthe answer tho

@Evgeni711 2 года назад

@@alfaromeonoproblem Thank you for quick reply. I just found your chanel today, great work i am going to watch more of your uploads. If I find out I will put the information here eventually.

@alfaromeonoproblem 2 года назад

Ok, very nice! Every bit of info is welcome here. Hope you like the videos do far. The playlist section may help on your research and discovery.

@mytyk1000 3 года назад

Thank you sooo much!!! You just save me!!!

@alfaromeonoproblem 3 года назад

Thank you very much for watching my videos! Glad I could help out

@КирилДраганов-р9д 2 года назад

Hello, thanks for the video. I have Fiat Bravo 2 1.6 multijet 105hp. From 1-2 weeks I have an issue with the clutch - when I am going on first and reverse gear the car is vibrating and annoying rasping sound is heard on the front of the car. Sometimes I am not even able to shift the gears and when I turn off the car and pump the clutch and then the car start shifting and driving off without vibrations. Could it be a problem with the clutch release bearing? Or because of old brake fluid and air in the system? Thanks in advance!

@alfaromeonoproblem 2 года назад

Hello. It can be both things, but start by replacing the old fluid

@konstantinusstoyanov9749 2 года назад

Cool, thank you

@alfaromeonoproblem 2 года назад

Hello. Thank you very much for watching my video

@lukasgelezauskas3216 4 месяца назад

very usefull, thank you!

@gabrielebrombin4187 2 года назад

thank you

@alfaromeonoproblem 2 года назад

Thanks for watching

@JoaoPedro-no6nu Год назад

Com essa lata de sardinha portuguesa e esse inglês bastante perceptível (a sério) vi logo que eras português :). O meu problema é como eu tiro o resto do rolamento de encosto que está ainda na forquilha. A caixa de velocidades sai-o bem pois o rolamento estava já partido na parte da prensa.

@alfaromeonoproblem Год назад

Olá. Muito obrigado por ver o vídeo. Não consegue tirar a cx é? Tem de remover a bomba de embreagem totalmente para deixar a alavanca correr. Eu tenho o canal totalmente em Português caso seja mais fácil para si. Com o mesmo conteúdo

@daniellimasousa6404 5 месяцев назад

Gostei da explicação. 👍

@alfaromeonoproblem 5 месяцев назад

Olá. Muito obrigado, tenho também em português se precisares

@munnachakra4342 8 месяцев назад

I have a very mild release bearing noise after driving in a knee deep waters after a flood, how to lubricate my release bearing without dismantling mu entire clutch can I visualise and access the release bearing from underneath my car that I may grease it

@alfaromeonoproblem 8 месяцев назад

Hello. What car is it?

@munnachakra4342 8 месяцев назад

@@alfaromeonoproblem My car is a Suzuki ignis 1.2 litre petrol short stroke 73mm bore x 71.5 mm stroke over square engine with 5 speed manual transmission

@alfaromeonoproblem 8 месяцев назад

There is no way to get to it or lubricate it. You have to replace it