How To Remove: Crank Arm 

Hi there! We will soon begin to sell parts including the 24mm puller. In the meantime, you can find 24mm pullers anywhere online! Thank you for your interest and have a great rest of your night :)

@@SunnyHealthFitness Your store is still not available and the 24mm puller I ordered off Amazon does not work. Care to recommend anything else? Brand? Link?

For anyone reading this and equally frustrated as I was -- ( I had waited a week only to find out the part I ordered was wrong) -- this is the correct part in the video: zoovaa.com/products/24mm-crank-puller-for-cycle-bikes -- And funny enough, the shipping label comes from Sunny. Zoovaa is at the same physical address, I guess. Same company? Who knows. Before you take the crank arm off, take pics of the distance of things -- from the back of the arm to the bike, etc. Just for a mental image for when you put it back on (I didn't do that). You'll want to do this because there's no video for how to put the new crank arm back onto the bike. But once off, you basically slide the new part on, give it a knock to make sure it's flush, screw the bolt back in, replace cap, and then follow the user guide for how to attach the pedal. Hope this helps someone else as it was a pain in the a** for me (a novice).

@@brendanwoodcock being in Canada I cannot wait the delivery delay that site is saying. I need to replace the bearing with the ones they sent me. But the crank tool I purchased from a bike shop won't even budge the cranks. Let alone struggled to get the tool to thread on one side but able to for the other. Did the crank arms get over torqued on the bike?

I was unable to find one online.. I went to a local bike shop told them my issues. they gave me correct part and some.tips on fixing the issue. 🙂

Glad it helped!

It could make a bit of a difference in ride comfort and feel. If you want a better replacement please send an email to support@sunnyhealthfitness.com for a parts replacement to get the part that matches perfectly.

hello! did you ever figure out a solution? i am in the same boat...

I have this problem too! I have now tried a 22mm crank puller and a 24mm crank puller and neither fit. Help!

Please send an email to support@sunnyhealthfitness.com so one of our reps can help you out!

We recommend reaching out to the manufacturer of your bike for further assistance with your machine.

Did you find a place?

Please reach out to our team at support@sunnyhealthfitness.com and we'll be happy to look into this for you!

im struggling with my IC3 schwinn.. have you had any luck?

@@rob1bassbone I'm with a Scwinn IC4. The bastards (Schwinn) used a 25mm crank puller thread, I don't know why. I haven't found any so far.

Hi Tony! Upon checking, you'll need the 22mm crank puller for your bike. You can find this tool at zoovaa.com, amazon.com, or your local bike shop.

@@SunnyHealthFitness well the one I have will screw into the crank arm area. But when I turn the lever till it's stops. I can't get any more leverage. And I've pulled it as much as I can. Should I use a hammer of some kind to really give it a go to loosen it?

@@toner37 The crank arm is machined tighten so it does require a decent amount of pressure to have it removed. You will need to apply more strength to move it. You can definitely use a hammer or mallet to loosen, just a couple taps should do the job. I've attached a video here to show you as well: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uY81er81dP8.html

@@SunnyHealthFitness ok thanks for that tip. Now I just have to go a buy another tool to remove the spring clip.

is there only the one bearing for the pedal crank assembly SB-901B? And that's the left side? I've been able to get the left crank arm off. But when I went for the right side I didn't see a bearing.

For any product specification based questions please email support@sunnyhealthfitness.com and a representative will assist you.

If you are having issues with your unit, please feel free to contact Customer Support via email at support@sunnyheathfitness.com.

Hey Andrew! We'll send your request to our support team. If you need further assistance, please feel free to reach out to us at support@sunnyhealthfitness.com. Thank you!

Hello Tony! We apologize for the confusion. We have 2 videos with 2 different tools. For your bike, we would recommend the 22mm crank puller. You can find the 22mm crank puller at zoovaa.com, amazon.com, or your local bike shop.

Hi Caricia! We're so sorry but we are unsure of what you mean by square taper :)

@@SunnyHealthFitness no worries. I was able to get the crankarm off and rethreaded. I am back in action. THANKS!

@@cariciamartinez7478 how did you get your crank arms off? I bought a tool for that and it won't budge at all. I"m thinking my crank arms were over torqued when placed on the bike.

that's the "type" of fastener as it were for the proper crank puller tool to fit

@@toner37 after I bought the crank puller it was a nightmare to get off. as it turns out the threading was jacked up (I purchased it assembled so dont know how it happened ) so it took some serious effort and a little cursing. I was afraid I was going to break something but I just slowly increased effort until it came free. I had to get the arm rethreaded but definitely beats the price of getting a new bike. hope this helps.

Please reach out to our team at support@sunnyhealthfitness.com and we'll be happy to help!

Hi Chris! Please see the link below: zoovaa.com/products/24mm-crank-puller-for-cycle-bikes?_pos=1&_sid=77e0512d5&_ss=r

@@SunnyHealthFitness It's sold out.

@@ellag6920 I'm in the same boat. It sucks. They decided to make the crank some weird size. They should have made it the standard size and we wouldn't have this problem.

@@JMT34237 I ordered the tool, and it's still the wrong size. No returns, and they changed $15 for shipping. I wish I never bought this bike. Will try to return.