Here's how to remove the upper intake manifold on a 5.0L V8 in a OBS F150. The process is very similar to removing the intake manifold from the 5.8/351 engine. You will need to do this to replace the left bank of fuel injectors, replace the EGR tube, remove the left cylinder head, and to work in the lower intake manifold. Consider painting the intake plenum when you have it out.
#f150 #302 #intakemanifold
Here is the link to the intake manifold gaskets👇
🚧 www.rockauto.c...
🚧 www.ebay.com/i...
To remove the upper intake manifold or intake plenum, you need to unplugged all the vacuum lines going to the vacuum tree and EGR (exhaust gas recirculation valve). Unbolt the throttle body or TB from the intake plenum. It’s held on with 4 bolts. You will also need to disconnect the throttle linkage and a mounting plate for a sensor. There is also a support on the passenger side that needs to be removed as well. Next comes the slightly more difficult part. You will need to remove 8 bolts from the base of the intake plenum. All of the bolts are fairly easy to access accept for one in the middle of the plenum slightly under the runners. You will need a very long torque/torx/star bit to unscrew this bolt. A very star L key can do the trick or a long bit driver for a hex impact gun will help reach that bolt. Once that bolt is removed the plenum should come right out. The install is the reverse of this process. Just make sure you plug or cover the lower intake runners so nothing falls into them. If a bolt or nut fell down one of the runners, than the engine would need to be rebuilt. Or at least broken down a bit to fish it out.
⏰ Time Stamps:
0:00 Intro
Welcome to The Minute Masters RU-vid Channel where I (Stevie) show you how to repair and upgrade all Ford F series trucks and Broncos from 1980-1997. So hit that subscribe button and be ready to resurrect your baby!🤙
🚨🚨🚨Want to wear cool Minute Masters merch OR get stickers?? click this link👇
minutemasters.bigcartel.com
🔥Subscribe here: / theminutemasters
Links to my favorite product producers:
desolatemotors...
www.jccustomsm...
www.bubbarope....
donttellmywife...
www.bajahidretr...
capritools.com/
rebrand.ly/min... 👈 Click this to get 10% off at Olsa Tools
www.shareasale... 👈 click this to buy rubber gloves from Zoomget. Use coupon code: 1C10! to get 10% off 1st Choice Gloves.
The project is my 1995 Ford F150 XL 2wd 8 foot bed.
🛍 As an Amazon Associate I earn from qualifying purchases.
14 окт 2024