Тёмный

How To Remove Paint & Rust with Stripping & Cleaning Discs - Kevin Tetz & Eastwood 

Eastwood Company
Подписаться 518 тыс.
Просмотров 315 тыс.
50% 1

In this segment from the Web TV Series "Hands-On Cars", Kevin shows you a great way to remove paint and rust using Eastwood Cleaning & Stripping Discs.
Buy Stripping Discs Here: www.eastwood.c...
Not only do they remove paint and rust quickly, they also don't cause excessive heat, which means you won't have warped panels. Don't forget to clean the rust out of the pits with Eastwood Fast Etch! Many people ignore those tiny pits, but there is still rust in those areas, and if you don't remove the rust, it will push back through and blister your paint.
3M™ Scotch-Brite™ Cleaning and Stripping Discs get down to bare metal fast Use your angle grinder with this 7-piece cleaning and stripping disc set from 3M™ to remove rust and paint residue from bare metal without generating excessive heat.
4-1/2"-dia. discs for smaller jobs
Cleaning disc produces an 80-grit finish
Stripping discs leave a 320-grit finish
Hook-and-loop backing
Eastwood has everything you need to do the job right when you're restoring your car truck or motorcycle - welders, plasma cutters, paint and paint guns, soda and abrasive blasters, hand tools, metal fab tools, rust solutions, powder coating supplies, specialty tools and more. Since 1978.
Are YOU an Eastwood Guy?

Опубликовано:

 

8 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 41   
@roflman
@roflman 9 лет назад
these discs are great, rips through filler and multiple layers of paint in no time, if you put on a bit of paint stripper to soften the paint up it works even faster and doesn't seem to clog either
@deankay4434
@deankay4434 6 лет назад
As a retired ASE Master tech, the Buick dealer had a body shop. The warranty time to repair delamination of the clear coat was like 3.2hrs for the whole top of the car, 1.4hrs for trunk deck and 1.2 for the hood. Crazy. They used a flat blade razor at a very low angle and strapped it right off without damaging the color coat. The cars where rather new, so I am sure it made it easier to work this way. I am sure they had a learning curve & training, but the job did not pay well but they got-r-done. I was a weird PPG thing that too much time passed between paint and clear and some issues with the chemistry. Either way it hit almost everyone, the big 3 anyhow. Strange what we remember.
@57corvettehead
@57corvettehead 9 лет назад
I really enjoy listening to Kevin Tetz because he does a very detailed description of what he is doing. He does not skip over important information or steps which helps me out a great deal. I have a question. I sometimes have a difficult time getting my sheet metal close enough so that I only need the 1/8 inch of surface enhancement. usually this is due to the difficulty in access to the back of the panel. In these cases I'm tempted to just cut the worst damaged metal out and weld in a new piece. Is this an acceptable practice and if so could you do a video on it? Thanks, John
@SeaDadLife
@SeaDadLife Год назад
Kevin, thank you for sharing your knowledge and experience.
@anneblouin1393
@anneblouin1393 Год назад
Work great on my chevy silverado.
@reparacionesfacileconomica
@reparacionesfacileconomica 7 лет назад
Kevin Tetz, you are the best.
@livedeliciously
@livedeliciously 5 лет назад
That was satisfying to watch. Can't wait to do this on my car.
@hackitgarage6503
@hackitgarage6503 8 месяцев назад
Mid 80s gm cars is what he's talking about with the paint falling of dad had an 86 tornado the paint peeled off the trunk didn't rot though probably galvanized
@hugeCRSfan69
@hugeCRSfan69 4 года назад
do you have a video on using the chemical to get out all of the rust in the pitting?
@robertall33
@robertall33 4 месяца назад
THANK YOU! lifesaver
@eastwoodco
@eastwoodco 4 месяца назад
You're welcome!
@JOEDAPOPERAPGOD
@JOEDAPOPERAPGOD 3 года назад
I just got mine in probably start soon
@slyr1
@slyr1 3 месяца назад
What’s the what’s the name of the angle grinder sander that you’re using? I would like to get one because I’m doing a large area removing rust on a piece of metal. Would like to know if you could recommend some thing with a lot of power I would also wanted to purchase Ass accessories in this video
@juliemoon4893
@juliemoon4893 8 лет назад
will this damage the base metal you know like if you'd just used sand paper?
@atmoss9423
@atmoss9423 Год назад
So these are more durable than the drums? I need to remove car paint better and wanted an idea of number of discs for one car.
@luktish
@luktish 4 года назад
Any issues with the clean up once the paint is removed? Any do's and don'ts? Thanks
@eastwoodco
@eastwoodco 9 лет назад
Are YOU an Eastwood Guy? - A Link to buy these from Eastwood is in the video!
@cantyoufeelthelove
@cantyoufeelthelove 7 лет назад
what sander is he using? Looks like a dewalt
@tbirdpimp07
@tbirdpimp07 7 лет назад
im curious about the 7 inch disks i know you can strip with the 4 inch and fill in the snd scratches with spray paint
@aaronshensky9385
@aaronshensky9385 6 лет назад
Great video, thank you. Question, Do these low heat stripping discs remove epoxy primer without clogging up excessively like sandpaper Does? Thanks.
@bobcatt2294
@bobcatt2294 2 года назад
I've been sitting here now for over 3 years awaiting the answer.
@johnmartin5153
@johnmartin5153 3 года назад
How long do you have to get primer on there before you get some rust coming back on the bare steel?
@Brandon-uy1uv
@Brandon-uy1uv 3 года назад
my guess is no more than 12hr maybe up to 24 if you live in a colder climate (no salt)
@slyr1
@slyr1 3 месяца назад
DO YOU HAVE THEPART NUMBERS FOR THE HOOK AND LOOP WITH THE PADS
@eastwoodco
@eastwoodco 3 месяца назад
You can find all of it here: www.eastwood.com/autobody/sandpaper.html www.eastwood.com/grip-9-psa-clothback-sanding-disc-5pc-80-grit-29319.html 54726 www.eastwood.com/grip-6-psa-sanding-disc-40-grit-29328.html 54735 www.eastwood.com/eastwood-6-inch-zirconia-cloth-backed-psa-sandpaper-5-pack.html www.eastwood.com/eastwood-6-inch-pressure-sensitive-psa-sandpaper.html
@Mr_getinthere
@Mr_getinthere 9 лет назад
Nice 👍👍
@zanelile8192
@zanelile8192 4 года назад
How does it on deep rust, say top of my car that us rusty ? Thanks
@scottgerke976
@scottgerke976 9 лет назад
My 68 Stang is getting ready to be prepped for paint. It'll be getting it's third paint job and I was wondering if I could just block sand it and paint over the second layer or should I use these discs to strip it? There isn't anyone in my town that has a soda blaster and the chemical strippers isn't something I'll even consider. Any suggestions?
@lilj7072
@lilj7072 8 лет назад
i would strip if its it 3rd paint job. you dont know how good the previous paint job were
@SOLDOZER
@SOLDOZER 4 года назад
50 year old car probably has multiple layers of paints and who knows what else. Id strip it
@wjjohns04able
@wjjohns04able 6 лет назад
So which is better, the SCT or these discs?
@eastwoodco
@eastwoodco 6 лет назад
It's preference, and it it depends on what you're doing. There are all types of different styles of drums for the SCT, making it a very diverse tool. So many people would choose the Contour SCT. Here are the drums that are available, and more are being added: www.eastwood.com/eastwood-contour-sct
@jeffreyivey9615
@jeffreyivey9615 7 лет назад
So I used the poly grinding wheels on the hood of my '57 Chevy Truck. It seems like in some places it left black marks. Has anyone had that problem and how did they fix it?
@aaronshensky9385
@aaronshensky9385 6 лет назад
Jeffrey Ivey im buy far not a body man i never had that issue but maybe lacquer thinner or rubbing alcohol might remove the marks? My guess anyways. Good luck
@Imwright720
@Imwright720 Год назад
There is one manufacturer who still has sheets coming off. White vans anyone.
@slickdawg4634
@slickdawg4634 4 года назад
I guess Eastwood hasn’t heard about dustless sand blasting huh.
@SOLDOZER
@SOLDOZER Год назад
The quote I got for dustless blasting was $1700. No thanks.
@Fr3shBoiKim
@Fr3shBoiKim 3 года назад
Man…Not the strippers I was thinking of.
@SOLDOZER
@SOLDOZER 4 года назад
You're going to spray a chemical on that pitted metal called "Ass Itch"???? That does not sound good.
@SOLDOZER
@SOLDOZER Год назад
"Dont build up heat" is 100% false.
@joeshelton15
@joeshelton15 6 лет назад
Comment bot 34252
Далее
🛑 ты за кого?
00:11
Просмотров 91 тыс.
Stripping Auto Paint The Easy Way @BlackStacheBuilds
12:21
Grinding and Finishing Metal in One Step!
13:29
Просмотров 170 тыс.
🛑 ты за кого?
00:11
Просмотров 91 тыс.