How to remove Range Rover Sport L320 Plastic Lower Door Moulding Panels

Подписаться 147 тыс.

Просмотров 27 тыс.

50% 1

In this video Gary shows us how to remove the plastic lower door mouldings on our project Range Rover Sport. You want to remove these plastic panels to get them colour coded. We are going to get them sprayed gloss black as we are not a big fan of the textured plastic finish. Or you may want to remove / replace them as yours are damaged. We look at the odd 2 part yellow and white clips and how to remove them.
The part numbers are as follows
- black clips are DYC500110
- Yellow & White clips DYC101420
- Front door rubber seal CFE500680 ( same PN for LH and RH )
= Rear door rubber seal CGE500380 ( same PN for LH and RH )
PowerfulUK.com
For all your Range Rover Accessories

Авто/Мото

Опубликовано:

9 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@richardforman8234 3 года назад

Thanks gents for creating these videos, I am in the process of adding a wide bodykit to my RRS and it would have taken me so much longer than it has to get off all the trim without your videos. Keep posting and thanks again.

@rtracewell69 3 года назад

Thanks so much for this great overview. Gave me the confidence to replace the trim clips on the trim that was falling off my driver's side door. Took me all of 10 minutes!

@L663 3 года назад

Glad I could help!

@WindinyourSails 4 года назад

Thanks Guys, very helpful

@Hotdogger808 2 месяца назад

Comment....did you know these side mouldings are so hard to get now that there are practically none left brand new in stock at distribution warehouses around the world. I should know I had to have the whole set replaced due to an accident and every time a set arrived they were flawed in some way, with transport shipping scratches on them or discoloured. I am in Australia and have had them come from the philipines warehouses and the UK warehouses and am still waiting on a one more moulding to see if is up to fitment quality standard, fingers crossed. I guess it is to be expected with a vehicle that is 14 years old. Great video chaps..Cheers!

@lyletregoning4717 4 года назад

“They look like ice gem biscuits” I don’t know why but that just proper job cracked me right up

@anthonyh3385 2 года назад

Awesome

@cristijucu654 2 года назад

Hi there , thank you for all your helpful videos . On my Range Rover Sport L320 year 2008 these ones are moving and I am afraid not to loose them .... I had them painted colour coded but the painter probably didn't put them properly or what it can be ? Can I order myself all those plastic clips for the front door ( driver side ) on Left hand drive Range Rover Sport. Thank you in advance.

@ceunny 4 года назад

I was wondering how you could remove the door handels, maybe an idea for a video? Oh and maybe put the Range Rover lettering just below the rear wiperblade.

@ricardoalbuquerque5956 2 года назад

Thank you!

@L663 2 года назад

You're welcome!

@riderblack777 6 месяцев назад

obrigado pela informação

@mvirdi2333 4 года назад

👋 Can you do the L405 as well please

@brianalamo3487 3 месяца назад

I had luck getting the yellow buttons out with a claw hammer like yours. Just grab the button like it was a nail. No need to dig the paint under the flange.

@L663 3 месяца назад

Sounds like a good plan if not a little savage !

@453421abcdefg12345 4 года назад

I think the strips are left natural plastic so that when people open doors on them in the supermarket car park they do not show damage, if painted,(especially over plastic), the paint will quickly flake off and make them look tatty.

@LyonsdenBlog 4 года назад

Great video - could you please post the part numbers for the clips - looks like you forgot to do that bit ;-)

@shabanikizamba6005 3 года назад

- black clips are DYC500110 - Yellow & White clips DYC101420 - Front door rubber seal CFE500680 ( same PN for LH and RH ) = Rear door rubber seal CGE500380 ( same PN for LH and RH )

@brettgillespie9308 2 года назад

Hi there question for you. What clips actually secure the trim to the body? The yellow and white ones and the black ones? Do you need to replace the yellow and white ones if they have separated as in your video? Thanks!

@L663 2 года назад

The yellow and white clips should clip back together but they are not expensive and may be worth replacing them - if you replace them you just fit them whole to the platic trim and the arrow head part locates into the door. The problem is removing the yellow part from the door - I usually tap them with a hammer and screwdriver to break them !

@shabanikizamba6005 3 года назад

Please I didn't find this Front door rubber seal CFE500680 ( same PN for LH and RH ) Please help me where can I get it. And if you have it in your store. I can buy it from you.

@shabanikizamba6005 3 года назад

Please can you give me the part number of that big black clips( front door 3pcs and Rear door 2pcs Please i need part number

@paulbatchelor9048 4 года назад

Hello do you no if the door mouldings half way up the door on 2005 range rover sport come of with heat gun or are they clipped.thanks

@L663 4 года назад

These are a stick on accessory www.powerfuluk.com/vehicles/range-rover-evoque-sport/sport-2005-09/exterior-accessories/range-rover-sport-side-body-moldings-rubbing-strips.html