Тёмный

HOW TO REMOVE RC TIRES | Using the bake method 

RC Girl
Подписаться 111 тыс.
Просмотров 105 тыс.
50% 1

Here I use the "baking" method to remove old tires from your RC car rims so you can reuse them to mount on new tires. It surprisingly DOESN'T make your kitchen smell like burning rubber, but it's no t-bone steak. ;)
You will need:
-Old set of tires/rims
-Thin cyanoacrylate (CA) / super glue (super thin)
-New tires/foam inserts
-Oven
-1000 grit sandpaper
To remove existing tires from rims:
Set your oven to 300 degrees (F) (or higher if it doesn't come off the first time). Place your old tires/rims onto a baking sheet. When oven reaches temperature, turn it off and place the baking sheet into the oven. Wait 5-10 minutes. Remove tires from the oven. Using an oven mit or towel, pull the tires away from the rims. They should be easy to remove. If not, place tires back in the oven for 5 more minutes. Clean up scratches around rims using 1000 grit sand paper.
To remount new tires:
Place your new tires/foam around the old rim. Pull away a section of tire at a time and place a small amount of super thing CA into the bead. Reseat the tire and hold in place for several seconds (it should be an instant bond!). Do this until your entire tire has been glued down.
Good luck!
Music:
Air Hockey Saloon by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: chriszabriskie.com/vendaface/
Artist: chriszabriskie.com/
*******************************************
SUPPORT MY CHANNEL
Become a Patron: / rcgirl
CONNECT WITH ME
On Instagram: @RC_girl / rc_girl
On Facebook: / thercgirl
Vinyl RC GIRL decals: www.etsy.com/shop/the...
RC Girl Tees: teespring.com/stores/rc-girl-merch
MY RU-vid FILMING GEAR: amzn.to/2yJE2wd
RU-vid BACKGROUND MUSIC: Epidemic sound - www.epidemicsound.com/referra...

Авто/Мото

Опубликовано:

 

20 ноя 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 265   
@jeffussery4884
@jeffussery4884 4 года назад
I've always just tossed the rims when the tires were shot. I will still buy new rims when the tires are shot. Now I will save the old rims because someday they will become obsolete, and you won't be able to find them anymore. Kinda like the old fashion hobby shops that use to dot the country. Thanks for the tip. Keep up the good work.
@travispratt6327
@travispratt6327 3 года назад
Yup, I accumulated a bunch of 3.3” tires with 14mm hexes, now both are obsolete and almost nobody sells/uses them… really annoying.
@michaelreece458
@michaelreece458 7 лет назад
Nicely done! Your videos are very informative and to the point without all the theatrical hype I see on so many others.
@superjoint57
@superjoint57 5 лет назад
Thank you so much for this video! I was hesitant to try this method but I did today. The results were awesome! I left the over N on at 325* and placed in (4) tires/wheels for 20 minutes. Thanks again! 🤘🏻🏁
@guillermopayne9950
@guillermopayne9950 6 лет назад
RC Girl, you are awesome! Learning a lot from you in a short period of time! 2 thumbs up to you!👍🏽👍🏽
@Del-Canada
@Del-Canada 7 лет назад
I don't even own an RC but I am hooked on watching videos of people removing RC tires. I did have an RC tank in the seventies tho. Loved that thing.
@Jovanri
@Jovanri 4 года назад
Wow...I've never heard of this bake method! Been cutting and acetone scraping which takes forever. Will definitely have to try it out on my next change of tires! Thanks!
@3rdaxis649
@3rdaxis649 7 лет назад
Didn't even realize you could do this. Thanks RC girl!
@spraytruckdolby6925
@spraytruckdolby6925 4 года назад
Just mounted up some ribbed tires for my son’s rustler and ended up with a horrible side to side wobble, due to a little variation around the bead. Your method saved the day! Thank you 👍🏼
@mazpr2025
@mazpr2025 5 лет назад
I come back to this video, as it was the first one I watched about a girl in rcing, abd you really have come a long way on staging, making video. You make it look so easy but I know it takes lot of planning and backstage work to deliver high quality videos. thank you Haley BTW, saw you in one of the rc airplane magazines!
@markhouseholder524
@markhouseholder524 Год назад
I think it's great seeing ladies into the hobby.
@chrisnolan6838
@chrisnolan6838 4 года назад
i just tried your tyre removal tip and it works great thanks heaps, stay safe.
@cwatson42785
@cwatson42785 6 лет назад
Imagine being rc girls husband and you come home from a hard days work and walk in to find her baking......Rc wheels!!! She is f**king awesome and is literally any man's dream girl. God beauty, brains and a unbelievable personality. She is definitely special. Awesome video.
@dillonwest9732
@dillonwest9732 7 лет назад
I'll try this method next time, looks easier and less messy than the acetone method!! thanks for sharing!
@mattwheelden3647
@mattwheelden3647 4 года назад
You have great tips and your videos are awesome to watch keep up the good work RCgirl.
@davidsikora2166
@davidsikora2166 4 года назад
Thanks for the info,lovely home you have as well
@beege22221
@beege22221 7 лет назад
thanks for the tire advise, rcgirl! you rock! i love you
@banjoclark4675
@banjoclark4675 2 года назад
Tried this today, worked great
@RcOffroad9513
@RcOffroad9513 6 лет назад
Awesome tip! I've seen a few other methods, but not any that worked well! Great video!!!👍
@TheSphongleface
@TheSphongleface 9 месяцев назад
I'm impressed that the Baking skill could be used for the wheels. I use it for the radio equipment frequently but nothing else
@officialdjhoody
@officialdjhoody 6 лет назад
Just what I needed to know...! Thankyou RC Girl!!! 👍
@BASHERSUNITED
@BASHERSUNITED 7 лет назад
The only method that works for me!
@wordreet
@wordreet 2 года назад
Woah! That's just under 150C! Brilliat! I'm definitely using this method. As I really don't want buckets of acetone in the house. Thanx RC Girl.
@philkennedy342
@philkennedy342 4 года назад
Never once did I think of that the number of rims I've thrown over the years 😂😂😂 nice idea from a lovely babe ❤️❤️thanks for that nice!!!
@smugglersrun2183
@smugglersrun2183 Год назад
Excellent video thanks so much 👍
@WadeTheWild
@WadeTheWild 6 лет назад
Thank you. Very helpful and descriptive. :)
@TranceFur
@TranceFur 3 года назад
Hey, this worked perfectly. You’re awesome, thanks!
@BlackSmithRC
@BlackSmithRC 6 лет назад
Great method for removing old tires! MIDWID! Sis.
@druscanam
@druscanam 5 лет назад
Was going to buy a 5L of acetone and a air sealed container to make an accetone bath (cause simply rubbing acetone on wheels doesn't work) but saw this today and it worked quite well. Thanks for the video, much help 😁
@nj2033
@nj2033 4 года назад
The only method that doesn't give you a chemical headache or squirts boiling water at your face.... So glad they invented Beadlocks!
@scaleaddiction
@scaleaddiction 6 лет назад
Amazing methods, subscribed and waiting for more
@joefloyd817
@joefloyd817 5 лет назад
Very interesting thanks for sharing so we can learn easy ways to do things 👍
@DickGibson
@DickGibson 4 года назад
Excellent tutorial, girl!!!!
@demitrisolvinski
@demitrisolvinski 5 лет назад
Very helpful, thank you!
@tonyromano6220
@tonyromano6220 5 лет назад
Demitri Solvinski Ditto!
@Toddderose
@Toddderose 5 лет назад
Thanks RC Girl for the video, great info!
@normanschmidt209
@normanschmidt209 3 года назад
Very helpful, thank you
@karl06111976
@karl06111976 5 лет назад
Nice framework 😋
@adamdatson4646
@adamdatson4646 2 года назад
Love a woman that can bake a good tire ;)
@ryansmith8782
@ryansmith8782 7 лет назад
Wow! I think I'm in love. I have never seen a woman who likes rc cars before. Awesome videos. I subscribed so fast.
@syren1913
@syren1913 7 лет назад
Ryan Smith damn same ! I saw girl and rc and was like um click, subscribe watch
@joeddejohn
@joeddejohn 7 лет назад
Ryan Smith Lol. It's like what happened. Regluing tires. I won't even do that.
@leftnutrulez
@leftnutrulez 7 лет назад
LOL Ryan!! But yea i must admit, it is kinda nice to see women who are into RC cars (^^,) Subscribed 5 seconds into the video (>.
@androot69
@androot69 6 лет назад
I had to click... just had to, I'd marry her
@makenitrogreatagain977
@makenitrogreatagain977 6 лет назад
Bunch of gay birds in here. She doesn't even acknowledge any of you. Nor does she do nitro. Sucks. She should give nitro a go. Maybe then she wouldn't have lame comments on her Channel?
@aaybes
@aaybes 3 года назад
5 years ago RC Girl is super helpful! 😃 Thanks!
@RCGirl
@RCGirl 3 года назад
haha one of my EARLY vids... ;)
@aaybes
@aaybes 3 года назад
​@@RCGirl Hopefully you still agree with your early recommendations. ;) I have been wanting to unglue/reglue the tires on my rustler 4x4 because I filled them with water (forgot to tape the venting holes and drove through a lot of mud) and I don't think I've managed to get all the water out so I want to properly dry the foam. Greetings from up north in SF by the way! 😃
@RCGirl
@RCGirl 3 года назад
@@aaybes yeah still a good method. I think adjust the temp/time as needed, depending on how much original glue was used. I lived in SF for 7 or 8 years before moving to SC! 🤙🏼
@aaybes
@aaybes 3 года назад
@@RCGirl Well, I finally got around to trying this out. I was trying to remove the foams from inside factory glued tires (Traxxas rustler 4x4 talon extreme tires) to clean and dry them after a trip in the mud without plugging the vent holes. 1 tire I managed to full get off of the wheel, 2 tires I got one side out which allowed me to carefully pull the foam out, the last tire unfortunately cracked when I pulled it off the wheel… 🤷🏻‍♂️ I'll try to re-glue it on see if that works… but I also ordered some new tires. ;) Also, it was very hard to get those off of the wheel!!
@mattwheelden3647
@mattwheelden3647 4 года назад
Aside from your super cool vids I been building a scale garage for my axial wraith and its almost done
@CallMeDouglas757
@CallMeDouglas757 4 года назад
Thank you for this RC Girl! My Pro Line separated from the rim!
@NYR09
@NYR09 7 лет назад
Great video ! Keep up the great work ! without sounding cliche ... "where have you been all my life" ! ? Lol... Great camera work and informative videos. Keep it up !
@rippertrain
@rippertrain 4 года назад
I just bought some proline tires for my traxxas udr. Thanks for the vid.i sure hope these ones last longer than the stock tires. The udr is extremely hard on rubber
@kimdra9321
@kimdra9321 7 лет назад
WoooooooooooooW nice work!
@sommmathechamp5801
@sommmathechamp5801 6 лет назад
Hi I am a new subscriber because this video was so helpful and awesome. I had wanted to replace my balder types without having to get new rims. Thanks for the video. :-)
@RCGirl
@RCGirl 6 лет назад
Sweet! Glad this was useful. I actually had to re-watch my video this weekend when I wanted to take some old tires off rims ;)
@MaratKo
@MaratKo 7 лет назад
Nice video! 👍
@gravityracergt
@gravityracergt 3 года назад
Nice video on the removal! Also for a good glue I would say the Proline Glue is the best I’ve used.
@RCTechBattles
@RCTechBattles 7 лет назад
nice tip, will try to use it!
@martyhiggins1373
@martyhiggins1373 7 лет назад
It is so good to see a lady RC enthusiast. When I first got into this hobby, my wife and daughter were really into it as well. They each had their own cars, and I even got an RC motorcycle, painted it all girly, and mounted a Barbie on it for my daughter. I had to use a heat gun to heat up the doll's legs to get them to open up and conform to the bike seat, and the doll was only good for piloting the RC after that. This proves that like most girls, you have to get Barbie HOT before she will spread her legs.
@seanmccormack5888
@seanmccormack5888 3 года назад
Nice thanks for the video.
@donovangladden9074
@donovangladden9074 7 лет назад
Subbed cause you remind me of my ex that hated RC cars. Gonna try the oven method ! Good video except for the bumps on the tires part. That part made me question everything I have learned in life🤔
@vwfury8609
@vwfury8609 4 года назад
You're Amazing. Thanks for the video it was very helpful.
@sparehead32
@sparehead32 4 года назад
Very helpful I was going to bin my rc rims can't wait for my wife to ask what's for dinner.
@dj7dust76
@dj7dust76 3 года назад
i think i just fell in love
@BARCstudio
@BARCstudio 7 лет назад
Epic video, keep it up! Do more bashing videos.
@freddiemaurer3522
@freddiemaurer3522 3 года назад
She's so much better than Martha Stuart. Thank you I didn't know this was possible.
@fruitycoconut
@fruitycoconut 4 года назад
It perfectly work. I tried on 4 proline destroyer 2.6
@jacobking6877
@jacobking6877 3 года назад
The pros dump em, and now i take them. Haha works awsome, helps save so much money and time, no more break in.
@Motorato61
@Motorato61 3 года назад
Good tip :D Nice feets by the way ;)
@allentraylor5659
@allentraylor5659 4 года назад
Smart & pretty .
@PRINCEVINCE1983
@PRINCEVINCE1983 4 года назад
Wow great video Rc girl. There needs to be more woman like you, because your awesome 😍
@alistairclark6814
@alistairclark6814 Год назад
Awesome, thank you. Subbed and belled!
@GunXter
@GunXter 5 месяцев назад
adding grated cheese on top of it, make it even more delicious! more RC recepies! 😆
@OMGRC
@OMGRC 7 лет назад
I tired the Boiling water waste of time. Bake your tires hand down works awesome on my traxxas slash. I did preheated the oven to 300° put the tires in there for five minutes took them out and pop them off the rim. Thank you😊👊🏻
@robbieracer3294
@robbieracer3294 7 лет назад
You can buy a can of acetone from Lowes or Home Depot, take the foams out, let the tires and wheels soak for a couple of days..they will peel off like they were never glued at all
@BryanGarcia-qb2ov
@BryanGarcia-qb2ov 6 лет назад
The problem with the baking method is the terrible smell the boiling water method works for me but you do you
@lokyc3201
@lokyc3201 3 года назад
If using boiling water method, the insert foam still can re-use?
@MsSuperMedia
@MsSuperMedia 3 года назад
This worked thank you... I almost put my tires in and baked them lol 😂
@mark-1rc502
@mark-1rc502 6 лет назад
Shit, a Girl That Likes RC cars and she’s not ugly either . Damn I’d Love to Talk Driveshafts and Drive cups . 😛
@gorillabeartech4577
@gorillabeartech4577 6 лет назад
Mark C Pervert lol
@mark-1rc502
@mark-1rc502 6 лет назад
GORILLA BEAR TECH 🤗 no. Really My Girl couldn’t give a Flying Feck about my RC cars.
@rguitarist
@rguitarist 5 лет назад
My God, you are just a natural beauty. My wife is a tall, beautiful blonde, but she thinks I'm insane for my RC obsession. I'm sending her this video right away. Haha! Luckily, we have a beautiful daughter that shares my love for RC. RC Girls are the best!
@adamforman9264
@adamforman9264 4 года назад
You very smart , I never new that ✌😉
@simonhunt7798
@simonhunt7798 7 лет назад
I like the way you presented your video so I subbed. I'm not balding just my hair is reversing a bit lol. Damn it for being 45.
@anthonycrompton1980
@anthonycrompton1980 6 лет назад
awesome!
@BLACKBOX1004
@BLACKBOX1004 5 лет назад
good video~♡
@IPHATBOYCHIEFO
@IPHATBOYCHIEFO 7 лет назад
Really good instructional video. i hope there is going to be more soon???????
@mtnmyke
@mtnmyke 3 года назад
I just did this. Took about 15 minutes but with a little tug they came right off! You're the best!
@RCGirl
@RCGirl 3 года назад
Nice! Happy baking this holiday season ☺️
@mtnmyke
@mtnmyke 3 года назад
Rubber cookies coming right up!
@TboneR-db3uh
@TboneR-db3uh 4 года назад
I destroyed 2 tires today using heat gun method. Tore the bead. Oven makes a lot more sense. Thx for the video. An wow your really cute. Lol.
5 лет назад
Tried this on my spare Trx4 tire and melted it! At least it came of the rim :D
@RCGirl
@RCGirl 5 лет назад
Nikola Šaub 😣 Oh no! Must not work on the softer rubber
5 лет назад
@@RCGirl Well that's why I used the spare tire, in case things went wrong ;)
@tyladube801
@tyladube801 4 года назад
Yea soft tire compounds break down easily and I've noticed that Traxxas just has soft tire compounds for most of they're tires cause my slash tires on my rustler got burned down pretty quickly just street bashing and I blew one of my back tires up so Im thinking getting some proline street fighter SC tires for the front and back then some proline f11 tires for the rear if I want to do some drag racing rn what I have for offroad bashing is some duratrax sidearms and lockups for the rear so I get alot of traction in snow sand dirt and mud
@ricksprings
@ricksprings 7 лет назад
can you reuse tires if their still good? I need to switch around bashing & worn tires
@meadowlarkgal23
@meadowlarkgal23 4 года назад
Do you prefer gluing the tire on the wheel verses a beadlock wheel? I own a crawler, monster truck and a 2WD short course truck.
@jasonlemmond3012
@jasonlemmond3012 3 года назад
I’m trying to get tires off so I can put them on beadlock rims will this destroy the tire?
@GentlemaniacMetanoian
@GentlemaniacMetanoian 3 года назад
Just watched a video of yours on how to remove glued tires. Wondering what the shape of the rubber after the baked method. I want to use the existing tires of my TRX4s onto new bead locks. Please advice. Thanks!
@RcAVENTURE.V.F.R
@RcAVENTURE.V.F.R 7 лет назад
big thumbs up
@mercenary454
@mercenary454 7 лет назад
An old man's head.....ouch!!.....i'll live....I subbed you anyway...lol.
@MrDavide1976
@MrDavide1976 7 лет назад
Hi rcg! today i just tried the heatgun for the first time and, of course, fat gloves, no hot water, no baking, no use of water or gas, no use of pots or baking pans, no water dropping around and above yourself. I tried both boiling and baking and between the two i definitely choose baking, but today, i really discovered something that i found much more easy.........................goodby
@Mrtomskiee2
@Mrtomskiee2 3 года назад
I have some 1.0 wheels so I might lower the temp? Thanks. Your videos are great by the way.
@taurushipointenthusiast1306
@taurushipointenthusiast1306 5 лет назад
Useful information I subbed, my daughter is interested in the hobby she is also taking in a lot from you
@300WINMAG360
@300WINMAG360 2 года назад
Can you reuse the actual tire after being baked?
@YoungB938
@YoungB938 3 года назад
Where can I get the monster truck style ones? The are identical to the originals on the Tamiya Mighty Bull
@GhostOholic
@GhostOholic 6 лет назад
Hey i have a question im new to rc cars and i was wondering can u put any tires on any times on rc car with out it messing up?
@dgmenace73
@dgmenace73 4 года назад
I've been hearing of the bake method but haven't heard anyone say a time of how long to do this? Do you mean it takes 5minutes or check in 5min and if don't pull apart check again in 5min?.....I have a set of plastic wheels that I already tried acetone on.....didn't come close to loosening them up. Pro-Line Masher Tires on Pro-Line wheels (factory glued, I think)....any tips will be appreciated! Thanks
@BigCheese85
@BigCheese85 3 года назад
Does it make the oven smell?
@luke_atthat
@luke_atthat 6 лет назад
Does it damage the tire? Let's say I want to change the wheel and keep the tire! Example, to use beadlock tire on a nice crawler tire. I tried the boiling method and not so so. Difficult to remove the tire and some chunks of tire are missing...
@1peanut
@1peanut 6 лет назад
RC Girl, you are always awesome with the info. I learned so much from your videos. How long did you bake these ? and what store has bins of tires for $5 ? lol what a score.
@davidgoff3013
@davidgoff3013 7 лет назад
Can you help me find tires that have markings on the sidewall of 72.00-44-43 ?
@edgarassalk2935
@edgarassalk2935 Год назад
the easiest way i found that worked is puttin the wheel under hot water in the sink, you dont need boiling water, just really hot water, when it's hard to hold the hand in it for more than 3sec worked for me, much easier than boiling
@DriftomaniacsRC
@DriftomaniacsRC 5 лет назад
Just seen this as I have been searching for a way to remove some SMT10 MT tires, and every method I try doesn't seem to work, I may give this a go but I'd been worried about stinking the house out
@michaelbowman7398
@michaelbowman7398 6 лет назад
Thanks for saying to turn the oven off. So many say to leave the oven on and that's why so many say that it smokes their house up. I pre heat to 325,turn it off, put the tires in, check after 10 minutes. As soon as I pull them out I put the oven back to 325, turn it off and throw them back in. No more than a 30 min process. I then pull the foams out and put tires and rims in acetone to remove any residue if I want to reuse them
@RCGirl
@RCGirl 6 лет назад
Yeah....burning rubber in the kitchen = not fun!! :)
@beastmodedad1608
@beastmodedad1608 6 лет назад
I was waiting for the cookies. Lol jk. Good video thx for the help with tire mounting.
@timschultes6467
@timschultes6467 2 года назад
Wow she’s awesome
@Mr_BUSINESS_24_7
@Mr_BUSINESS_24_7 2 года назад
use a Dremel tool with a wire wheel to clean up the grooves on the wheels.
@eg6sir379
@eg6sir379 7 лет назад
Four for 5ive bucks?!?! That's pretty cheap, and you got yourself an AWESOME deal!
@BrianPeak73
@BrianPeak73 4 года назад
Can you reuse the baked tires?
@RCGirl
@RCGirl 4 года назад
Of course! As long as the bead is intact
Далее
Removing Glued RC Tires! - RC Basics E1
8:13
Просмотров 140 тыс.
Best RC car truck tires for any terrain!  Bash or Race.
14:15
HOW TO REPAIR YOUR RC CAR BODY |  Tips and Tricks
5:58
HOW TO - The Best Way to Remove RC Tires
5:52
Просмотров 43 тыс.
HOW TO REMOVE RC TIRES / using boiling method
6:54
Просмотров 8 тыс.
This is 'Not a Wheelchair' - Introducing The Rig
7:20
How to Glue RC Tires! - RC Basics E2
5:58
Просмотров 66 тыс.
WD-40 Hack!!!
13:58
Просмотров 17 тыс.
Glue Your R/C Tires Like a Pro
13:45
Просмотров 160 тыс.
МОТ до 100 000₽ 😈
0:19
Просмотров 594 тыс.
Мгновенная карма 😱
0:10
Просмотров 2,3 млн