You don’t need to submerge. Just the fumes in a container with the tire with deactivate the tire glue. It may take a bit longer. I buy my acetone at the hardware store in 1 litre or 4 litre cans. Pour some into the bottom of an empty paint can (also cheap at Home Depot)and place a spacer, usually an old rim in the bottom. You can chuck 4 short course size tires in and they be good to go in 24 hrs.
Nice vid but who has 8 hrs Bro plus acetone destroys foams (stretches them beyond repair) ....... Heat oven to 350 degrees once temperatures reached install as many tires as you want or your oven holds 😂 once installed immediately turn oven off, set timer for 5-7 minutes, once timer goes off remove tires & with a towell or gloves simply push tires of the wheels...its that easy...
bla bla bla bla bla fking bla just do whatever you fkg want a d don't talk to may 💩💩 the guy just give a tip of how to unglued the tires but you Mr know everything talk just only 💩💩💩 .......just 🤐 🤡
the easiest way i found that worked is puttin the wheel under hot water in the sink, you dont need boiling water, just really hot water, when it's hard to hold the hand in it for more than 3sec worked for me, much easier than boiling
I boil mine, it works good but need to let them boil till the point they just fall off easily, otherwise you’ll be ripping the tires and leaving ca behind. Takes awhile but also gets em looking like new.
good method to remove. even though many just ask stupid questions and others just talk shit. about your method. everyone is free to use the method they want. if they don't like what you tried to do in this video. Just keep your mouth shut and don't talk, you're not going to get a fly in your mouth 🤡
I removed them by leaving them soak in Acetone overnight... That simple, you place them in a plastic bowl, laid them down, fill it up with Acetone. Just enough to cover the tires, place tight lid, and by morning you'll have clean wheels 👍
I’m curious also so it doesn’t effect the tire or foam? I’m mainly asking about the tires hell I’ll get new foams if need be lol. I just wanna make sure it won’t weaken my tires I’m taking off. Good tires on shit wheels? Thanks for any additional suggestions comments
@@kgrc0078 It's a good video. I've been putting them in a 5 gallon bucket with acetone sitting in the bottom and the wheels and tires on racks. Put the lid on and let the fumes do the work. Let sit for a few days and boom.. they fall right off with no effort and no mess.
@@RX-0_FPV does that let you keep reuse the tires and foams? I have a set of tires, and they are glued crappy. I want to redoo them, so interested in preserving them.
