How to remove swirls! 

Guys, please pay attention to the editing especially the sound. The difference between speech and music is too great, the speech is too quiet and the music is too loud. This means that you’re constantly adjusting the volume which is really annoying. Spoilt what would have been an otherwise brilliant video 😡

good vid man, i like yer stuff. i'm across the pond, down here in these Tennessee hills. The Meguiar clan are from the hills of Scotland close to your neck of the woods.

Great video.Easy steps to follow & super products too.👍

Amazing video 🔥, I ❤️ meguiars

Hey where are you ??? Hello from Greece I have to see you a lot of time.I wish you are good.sorry about my English I don’t speak very well.

Cool vid but music get's too loud.

Good channel and video , shame you keep ruining the vids with crap music

Gave up watching as music too annoying

Just a wee tip, if you use tar and glue remover then iron remover it'll save you're claybar for clogging up as much. Chemically removing the contaminants before physically removing them.

Would’ve been 10x better without the music.

Horrible products, they dry supper fast and bearly gives you time to wipe it off, and even if you wipe off on time they leave residue/stains on your paint

Do away with the loud shite music,otherwise good vid

Would have been nice to see the clean car at the end!?

I love using the ultimate quick detailer after every wash! Makes my car look extra shiny and the panels feel smooth to the touch!🤙

Great video but the music is WAYYYY too loud.

Hate the music....what is that? Tortured oompa loompas!

I’ve over 20 years as a vehicle painter, and I see you’ve made the biggest mistake after machine compound polishing, when applying any wax, polishes, or glazes you should always apply in straight lines, or your just putting minor swirls back into the the clearcoat. If you want the ultimate paint correction, sand the panels wet with a DA sander and a 3000 Trizac disc first before machine compounding.

Excellent method guys👏🏽keep smashing it🏁🔥🔥🔥

Great video, does a compound/polishing pad last the whole job or do you have to change it out a few times. Thanks

Yeh great but show the car at the end, and cost of all those products? Hundreds of £'s probably.

awesome video, how long it takes for you to finish this whole car alone?

damn! the vocal audio to music got me working over here! LOL

Great job, I used your Stage 3 Deep Crystal Wax on our black Ibiza recently after a light machine polish and I think the gloss was even better than the Ultimate Wax.

Sorry I had to stop watching music to loud. .

Is the polish going to still leave micro micro swirls ? I have the same polish and soft pad on a DA and it still leaves micro swirls un bright white light

The music blares and I have to turn the volume down. I can't hear the voice anymore. How can you make such a horrible mix?

What a great product Wash Plus is!! one of my favs!

Isnt compound a little too abrasive for little swirls?....why not just use a polish

Why is the music so loud and the guy talks so quiet nobody wants to hear the music the video would be far better without it. I can't be bothered to keep turning the volume up and down. So bye I will watch other videos

We know if we remove swirl mark/scratch the clear coat layer is eroded. Is there tips n trick to add or replace the clear coat layer?

Good vid as always 👍 I definitely picked up a few tips from your videos, and I'm looking forward to trying them out when the weather improves.

I use most of them but I have the ceramic liquid wax in the green bottle and I love the results. Im a beginner DIY and from the 1st time using the compound I noticed a huge difference ❤

The 110 finishing polish isn't good for beginners.

Please don't use slow motion effects when showing polish action, we need to see how fast or slow to go with the da. Thanks!

Maybe for future videos the guy talks low and the music is way to loud

Good products and knowledge results speak for themselves ❤

Wipe the way the wind hits the car never circular motions

Do you need to remove protective selants or ceramic coatings?

Polish machine price pls??,

and TAT removal ?

Pre-wash with a pressure washer-sandblaster? Dang

Good job I used it last week this week I followed up with the polish

How much time do you spend per section?

Lost count, how many products was that?

That music is annoying AF.

The Meguiars video I watched right before this one told me to section off 2x2 feet sections only to polish. "Don't try and work any sections bigger than that." And in this video the guy is polishing half the entire hood at a time. - After about 4 videos I'm thoroughly confused as everyone claims their method is the right way. THE MUSIC IS TOO LOUD.

I think you guys need a real challenge, an 18 tonne truck that's had yard brushes and farms thrown it Needs making show ready

Watch alot of vids and enjoy but you go against everything you say. So not to use a carwash soap with wax because you want to compound/polish on a base with no wax on it…. Well you use a quick wax as a lubricant for the clay bar literly rubbing it into the paint. Use a bucket of h20 with dawn. That would be what you do. You try to sell to kuch of your product is the problem. We buy the stuff as we see fit/ want anyway. Dont go against doing the right thing to sell an extra bottle of a product

unfortunately your Hero product can not remove swirls and small scratches at all!!! It can definetely restore a faded colour but thats it. No more. Helping to get a mirror finish, yes , but removing small scratches and swirls....no way! These pads, the compound pads, are very strong and they create holograms and swirls but by using a polish pad and the ultimate compound, the results are better

So machine to remove swirls/light scratches then hand to polish the paint. Is that it?

Shite loud music 🙄

informative video, thanks! but I have to say the soundtrack is annoying and too loud. I would lose it.

After the polish stage, will any wax be ok? Meaning, do we use the ultimate no matter what followed by the green liquid ceramic?...or is the green liquid ceramic find as a supplement for the ultimate wax?

Hello my car have many swirls .Should I use first the ultimate compound first and after the ultimate polish?

First time I've seen anyone add wash to the mit. I mean seems like a waste of product to me why not just foam it rinse then foam it again and use two bucket method. Less soap used money saved.

Where could I take my car to have all this done for me? I love cleaning and detailing my car but due to health I'm really struggling 😢

Thanks for the tips. I've been collecting some meguiars products ebay. Do you sell any products yourself?

My all black cadilac is due for swirl removal so I have my color match my rotory and I'm ready

3:37 anyone know the name of this song? It was the only song I actually liked in the video.

I have already applied Meguiar's Hybrid Ceramic Wax on my car. Can I directly go wash and apply compound? or I need to take out the Hybrid Ceramic Wax?

Fucking music

I have a question. I just bought a car in 2021, now it’s been almost a year do i need to compuand my car ?

Will the same method work for metallic black paint or is there a different proceedure?

Ridiculous music

On dark colored cars such as black, I prefer waxes over SiO2 based products. Wax gives a more natural shine, vs the overly plastic looking of SiO2. We can argue over durability, but frequently applied, waxes can hold their own.

I am using compound on the grill of my Jeep, do I absolutely HAVE to use polish and then wax afterwards? Or can I just use ultimate compound and then wax it? Thanks

I use the same method as this video guided me. However, the flat surface (red) one same as the video and after wiped down it give me cloudiness but if I did it by hand will make the shine looking. I need help to resolve the cloudiness.

nice job. my question is can clay bar remove heavy water spots from car glass

This was a really great video! This channel desperately needs P R O M O S M!!!

I've got a mk1 rs focus doing fancy showing me how to do it it's a clean car and it's got a show in May this year

Where are you guys based, i need to bring my Lexus ls400 to you

Clay bar while washing been claying for 30 years same results saves time

Compound then polish. Or polish then compound 😊

Fix the audio voices too low and music too loud

What happens if it dries on the surface will it damage the surface?

If you ever want to use my car as a demo feel free to ask 😊

when should i be applying ceramic coating?

Goin to be trying it by hand lol wish me luck on my black Passat cc

I’ve done my mistreated x5 last week with all this products, except the clay, and I can say it makes a great difference, looks and feels great and dirt doesn’t stick to it that much anymore. Working on a building sit means my car is covered in all sorts of dust and dirt but now is all easy to remove. Great procedure and great product.

The towels are from chemical guys

Did this by hand all three and lord it took me forever

Christ need about 40 bottles

What exactly does snow foam do

Hi guys, what speed should I use the product?

I used the compound + polish yesterday, it was very difficult to remove it! I had to remove it almost immediately, because the longer I left it on, the harder and harder it was to remove. What im doing wrong ?

Read reports wash plus adds marring?

So I'm impressed, I've just ordered a MT320 ULT kit. BUT I've got an Merc SLK with ridges on the bonnet/hood. Can I use the machine over those or is there a risk of removing the finish? Obviously can't keep the pad flat.

The music woke my son up 😂

Hi What can I use to clean chrome round windows and front grill, the water droplets and dirt thank you

That Dale is brilliant he knows his job

Is the all wheel cleaner safe on painted wheels? My car wheels are painted black from the factory. I know it says all wheels on the bottle, but just wanted to make sure. as I have 2 bottles of it in the garage that were given to me.

I would like to know once prepping the pad for compounding or polishing must I spray the pad with water just give it a mist?

Great video with no sound

Great video, can I ask what rpm you were using for the cutting compound and also the polish? Cheers

How long would you estimate a hand wash, clay bar, compound, polish and wax to take on a crew cab truck?

MUSIC... TOO.. LOUUUUUUUD!

So is the white microfiber pad you show good to use for removing the swirls by hand?

Can you do a video on DA Microfiber Polish [ D302 ].

Good video. Why dont they sell. The. Wash plus anymore

Cracking job as always buddy