No video :(

How To Remove Scratches From A Car - Black Paint Polish DIY

Подписаться 908 тыс.

Просмотров 156 тыс.

50% 1

chemicalguys.com
Learn how to remove swirl marks and scratches from black or other dark colored paint! Buffing out or polishing paint scratches from your car is easier than you think and we'll show you how.
Speed and perfection was our goal in developing C4, the evolutionary compound capable of precision paint correction and perfection. Rapid results in less time in a compound that is effortlessly capable of removing scratches and swirls, sanding marks, scratches, acid rain etching, and severe swirls and holograms means this is your new go-to compound whether you have a DA or rotary polisher, or you’re working by hand. C4 is developed for fast cutting paint correction without long work times and is designed and developed for tremendous results in the shortest time possible. With P4, speed is of the essence and long work times are not required, so you can get incredible results in the shortest time possible. When you’re looking for a truly perfect finish with deep gloss, P4 polish technology effortlessly produces flawless results with your DA or rotary polisher. The versatile polish is capable of correcting 2000 grit and finer sanding marks without dusting or leaving behind residue, making this polish extremely easy to use and work with.
- TORQ 15DA:
bit.ly/3Elqh5p
- C4 Clear Cut Compound:
bit.ly/3ErrLLm
- P4 Precision Paint Polish:
bit.ly/3qXQOTo
- Clay Luber:
bit.ly/45VnRGi
- OG Clay Bar:
bit.ly/3sze4Yd
-------------------------------------
● Find a Detail Garage Near You:
● Website: www.ChemicalGuy...
● Subscribe to our channel: www.youtube.co...
● Like Us on Facebook: / chemicalguysmfgco
● Follow us on Instagram: / chemicalguys
● Follow us on TikTok: / chemicalguys
● Follow us on Threads: www.threads.ne...

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 102

@ChemicalGuys Год назад

Remove Scratches & Swirls! - TORQ 15DA: bit.ly/47W7Z8w - C4 Clear Cut Compound: bit.ly/3Rmwztx - P4 Precision Polish: bit.ly/3L5zr9Y - OG Clay Bar: bit.ly/3P4pURA - Clay Luber: bit.ly/3Plwtjd

@lukestier6840 4 месяца назад

You absolutely did well detailing the hood. Leaving the rock chip out because that requires body work and paint, there were still very noticeable scratches on that hood. The next level is to wetsand any "serious" damages to the finish with 2 thousand grit wetsand paper

@jediaelliefden5213 4 месяца назад

Use 3000 and finish with 5000

@evanlangley9130 Год назад

This dude is totally therapeutic to watch.. dig it

@ChemicalGuys 11 месяцев назад

Thanks for tuning in and being part of the Chemical Guys family!

@rachelhoyle5728 11 месяцев назад

Agree!

@DBusiness85 11 месяцев назад

❤YES! Lol….and he’s very handsome. Bless His Heart.

@ToeKnee831 11 месяцев назад

Thia dude is calm and knows how to explain the process properly. I appreciate this video

@ChemicalGuys 11 месяцев назад

Happy detailing!

@denisef1153 9 месяцев назад

I love chemical guys products. Only products (tried 4 diff ones) for me and my car that wiped off easily and gave the car a deep shine.

@ChemicalGuys 9 месяцев назад

Thanks so much for being part of the Chemical Guys family!!

@hyde4never 3 месяца назад

I got a heavy duty claybar to remove the overspray on my driver side door and it has a good effect. But I realized it's hard to tell if the claybar is dirty because the color is gray. Hopefully in the future the heavy duty clarbar can be made by the light color.

@tjppunzalan4460 Год назад

May I ask if the same process for removing existing ceramic gloss? thank you

@chinothedreamgiver1629 10 месяцев назад

Do all these scratches come back after a couple washes?

@louied420chavez2 9 месяцев назад

Yes

@filip36365 9 месяцев назад

Depends on how you wash the car. If you use brushes or carwashes yes they will. If you wash your car without physically touching it they wont. I wash my car using a pressure washer. You can also use a foam cannon. Apply soap with the pressure washer (soap attachment) or your foam cannon. Dry with a leafblower as even microfiber can leave marks

@alexgonzalez7395 6 месяцев назад

I just got a model y and after 5 washes I was upset how my microfiber rags left swirls also on front bumper left some scratch looking lines. I guess black color is high maintenance. Constantly waxing .

@ilovelinkinpark1234 6 месяцев назад

Try a touchless car wash if you have one near you. It uses harsher chemicals to get it clean so be advised of that, but it won’t scratch.

@QuinlanPower 5 месяцев назад

Yep… its like an kids filler for sale cars. Or then you need A LOT of wax top of it

@Goodluckwarzone Месяц назад

When you finish polishing, how long do you need to wait before applying a wax coat and a ceramic coat?

@santiagoarce448 2 месяца назад

My car is covered with bugs. Even after washing and using bug and tar remove they’re still there. Will the clay bar remove dead bugs? What do you recommend to do?

@Basicallysimple777 Год назад

That looks awesome 👌 Really like your products!

@ChemicalGuys Год назад

Thanks so much for being part of the Chemical Guys family!

@brenth5132 2 месяца назад

Im looking to ceramic coat my Black Motorcycle but I need to remove some swirl marks. I was going to clay bar it. Then would I also use the P4 then ceramic coat it? Or not use P4 and just ceramic coat it after the clay bar? Thanks

@DBusiness85 11 месяцев назад

I was just thinking about ordering the clay bar set for my black car yesterday and now I see this video lol! How Sway….Thanks for this well detailed video.

@ChemicalGuys 11 месяцев назад

😀😀 Happy detailing!

@metraxstar1451 5 месяцев назад

How much pressure are you using on the machine are you pressing on it hard or just letting it do it under its own weight

@geoe.8013 Месяц назад

I can still see swirls though. Maybe it needs another pass with compound?

@michaelpeters3349 7 месяцев назад

Hey guys, awesome videos. I’ve got some very light scratches and swirls. First question, what’s the difference between the C4, P4, your V series, and VSS? What would work the best in my situation? Can those swirls and scratches be taken care of with a hex-logic hand pad? Thank you!

@Makeitcountb4itstolate256 5 месяцев назад

I have a question boss Tesla cars have water base paint do you feel like the foam pads your yawing work better then microfiber pads?

@playboyagent7586 8 месяцев назад

I wanna get a job doing this I love cars and working on keeping them clean has always been my favorite thing about owning a car. Do you need any type of degree or anything to get a job like this or can I just show up to a shop and ask for this type of job

@joeygarcia4277 3 месяца назад

You would have been an excellent trainer in the military bro

@dawsyngrant362 9 месяцев назад

Looking to do my black Tesla! Is there any steps after the p4 to get any other micro scratches out? Also is there a process to follow after this to ceramic coat the vehicle?

@chillagorilla 5 месяцев назад

Do these compounds replace your V series?

@kylinturnbull3708 Год назад

If I need to remove oxidation/sun damage What pad and compound do I use for you line of product? Thanks!

@rachelhoyle5728 11 месяцев назад

That’s a good question, I would also like to know.

@denisef1153 9 месяцев назад

Follow all his steps and use the products in the order he is telling us. It’s amazing.

@younged510 Месяц назад

Can I do this outdoors?? Thanks hope to hear from you soon..

@ChemicalGuys Месяц назад

Hey! Paint correction is best performed indoor or a cool, shaded area that is out direct sunlight.

@imsome4566 10 месяцев назад

Hi guys, I need your help. I have a black rav4 that's parked outside under a tree. It's has scratches all over, and the plastic trim is dull. Please help me get my baby looking like new again.Thanks.

@Majesticali24 7 месяцев назад

Mine left swirls after doing it and it won’t come off

@bankerman4395 4 месяца назад

Mine did as well. It really made the paint look worse than when I started.

@amandeep7096 10 месяцев назад

can I apply both the products with hand/microfibre cloth instead of buffing machine ?

@yassir1065 4 месяца назад

Yes

@rachelhoyle5728 11 месяцев назад

Chemical Guys, what do I do if a vehicle has pin sized rust spots coming through as well as cosmetic scrapes? Can I still ceramic coat it? Or must I get my whole vehicle professionally repainted first?

@evanfitch6810 11 месяцев назад

Pin sized rust spots may not be from your car, if they’re that small, you likely picked up pieces of iron from the road. Try clay bar and use an iron decontamination spray as lubricant.

@rachelhoyle5728 11 месяцев назад

@@evanfitch6810 thank you!

@vancearrigoni1083 11 месяцев назад

Hey all. My C-4 compound is a soupy consistency not a paste even after shaking it up. Is there away to get it back to its paste like consistency?

@ChemicalGuys 11 месяцев назад

Hello, thanks so much for your message. Please contact our Customer Service team. www.chemicalguys.com/sfcc-contact-us.html

@bankerman4395 4 месяца назад

This stuff didn't work on my paint and was liquidy as well.

@sethstieghorst7945 4 месяца назад

I still have PTSD from doing my headlight I am not qualified to touch my black paint with a buffer😂😂😂😂😂

@Davo996 3 месяца назад

Never use a buffer. Clay bar then polish by hand with a cloth.

@danb2140 4 месяца назад

Clay baring scratched the f out of my car ! Used tons of lubricant and the clay was clean ! 😢

@user-tk3xj8ww2d 11 месяцев назад

goodjob!😊

@ChemicalGuys 11 месяцев назад

Thanks for tuning in!

@jamesrospopo3137 Год назад

This is what I'm thinking for my black F 150 pickup. Any suggestions and advice is welcome. Start with clean slate, clay bar, C4 followed by P4, then another wash with clean slate just to make sure everything is off. Ceramic treatment with Carbon Force. Then I'd like to put a glaze followed by a wax. Any suggestions on what to use for the last two ?

@MrHackfu Год назад

Instead of washing after the polish, I used their Wipeout spray.

@ChemicalGuys 11 месяцев назад

Sounds like a fun weekend! Make sure you wait 24 hours after Carbon Force before your final steps - since your paint is dark we recommend Blacklight Glaze (www.chemicalguys.com/black-light-glaze/GAP_619_16.html) followed by either Butter Wet Wax for a warm glow, or Lucent Spray Shine for a cool mirror shine. Maintain your coatings with HydroSuds so all your hard work lasts as long as possible! (www.chemicalguys.com/hydrosuds-ceramic-carwash/hydrosuds-ceramic-carwash.html) Happy detailing!

@chilltown11 10 месяцев назад

I wash my black car with extreme soap and it looks crazy good until i vet up close and i wa na take off on somebody😂😂😂

@ChemicalGuys 10 месяцев назад

Happy detailing!!

@fredschair-heavytalk2683 9 месяцев назад

Should we clean the vehicle before starting this process ?

@ChemicalGuys 9 месяцев назад

Absolutely!

@denisef1153 9 месяцев назад

Use clean slate to was the car.

@richperry349 Месяц назад

Sup with that Scion IQ creeping out in the back? I'm actually trying to restore a neglected Grey Scion IQ.😮

@LB-kr5ku 11 месяцев назад

Can you just clay the vehicle then wash it or do you also have to polish it?

@ChemicalGuys 11 месяцев назад

Hi there! For best results we recommend machine polishing before applying coatings.

@superc910 6 месяцев назад

I’m about to catch hell trying to do this on my titan hood😅 but it needs to be done. Made a mistake by using a car wash brush. Yep tragic

@ChemicalGuys 6 месяцев назад

Happy detailing!!

@ctaylor331 4 месяца назад

how hard are u pushing when using the c4 or p4??

@uniquenwo8976 3 месяца назад

It’s all depends on how deep the scratches are. Deep ones need a hard and slow pass. Light ones can be done with light and fast passes.

@juanvargasSAAA Год назад

Outstanding

@ChemicalGuys 11 месяцев назад

🤩🤩

@carlyroxx3592 3 месяца назад

What to use for a black 85 firebird? Garage kept but not a lot of clear coat left on it. Minor scratches. I’ve been told if I use a a buffer it’ll make swirls that won’t come off, but the orbital is different..

@victoracevedo5107 Год назад

After using C4, P4, is it OK to use wetwax?

@ChemicalGuys 11 месяцев назад

Definitely! It'll add a nice layer of protection on top - happy detailing!

@Reyon2Real 11 месяцев назад

Chemical guys, I have a question. Do I have to use both p4 and c4 or can I just use one of them? If so which one would be better?

@ChemicalGuys 11 месяцев назад

Hey there! While for best results we recommend using these together as a two-step process (C4 then P4), you can absolutely use them individually, depending on your needs. For scratch and swirl removal you'll want to use C4, for a finishing touch and that sweet jeweling look use P4. Thanks for watching!

@Reyon2Real 11 месяцев назад

@@ChemicalGuys I am 13 years old and I love detailing cars, Now I know what to use to fix up my dads car! Thank you very much!

@FarikoPacer 11 месяцев назад

Yes you have to use both. If you use compound it has abrasives in it. It’ll leave pad marks and the polish takes those out and brings out the jeweling (shine) out