Тёмный

How to Repaint Your Wheels (ANY COLOUR) 

milanmastracci
Подписаться 390 тыс.
Просмотров 404 тыс.
50% 1

PREVIOUS VIDEO ▶︎ • GOOD NEWS!!!
In this video, I show you how I go ahead and repaint the rusty steel wheels on a Ford F250. By following this procedure, you will have the knowledge, a full step by step tutorial, and the links you will need to tackle this project yourself.
I have everything you will need linked below, in the order of appearance. If you’re looking for something that I missed, just let me know in the description, or send me your question at milanmastracci@gmail.com.
This tutorial is mainly focusing on steel wheels are the rusting, however if you are working with alloy wheels, it will be a bit easier as there will not be any rust and the aluminum is a softer substrate than steel, meaning the prep should be easier. I will include a video in the future regarding painting alloy wheels.
If you have any questions regarding the video, you know what to do. Thanks for watching!! :)
______________________________________________________________
Please give it a like 👍 and follow 👣
MILMAST MERCHANDISE ▶︎ www.cteecustoms...
milanmastracci RU-vid Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
______________________________________________________________
Videos in the Outro 🎥
GOOD NEWS!!! ▶︎ • GOOD NEWS!!!
How to Install a RACE Cold Air Intake ▶︎ • How to Install a RACE ...
______________________________________________________________
Products Used 🛠
PREP
3M Face Mask ▶︎ amzn.to/2fiNLul
Porter Cable 6 Amp Angle Grinder ▶︎ amzn.to/2fwqIRM
10-Pack Auto Body Sanding Flap Disc (80-Grit) ▶︎ amzn.to/2eeI8wp
10-Pack Auto Body Sanding Flap Disc (120-Grit) ▶︎ amzn.to/2eoQ0Pv
Griots Garage Sander 3” Sander ▶︎ amzn.to/2foBKrj
3M 3” Foam Interface Pad ▶︎ amzn.to/2ebE98X
3M 3” 120 Grit Sandpaper ▶︎ amzn.to/2fGrlsl
3M 3” 320 Grit Sandpaper ▶︎ amzn.to/2fOLj33
3M 120 Grit Sand Paper Sheet ▶︎ amzn.to/2ebCLTA
3M 320 Grit Sand Paper Sheet ▶︎ amzn.to/2ebG4dD
Wire Brush (By Hand) ▶︎ amzn.to/2fGu2tP
Wire Brush (Impact Driver) ▶︎ amzn.to/2fncX49
Wax and Grease Remover ▶︎ amzn.to/2ezUlz3
Shop Towel (2-Pack) ▶︎ amzn.to/2ezWQBL
3M Paint Respirator ▶︎ amzn.to/2ebIdWo
Olfa Serrated Scissors ▶︎ amzn.to/2ezVp65
PAINT (Primer → Base Coat → Clear Coat)
Rustoleum Automotive Primer ▶︎ amzn.to/2foBJUa
Rustoleum Gloss Protective Enamel (Base Coat) ▶︎ amzn.to/2epsfmU
Rustoleum Gloss Clear Enamel (Clear Coat) ▶︎ amzn.to/2fngf7s

Опубликовано:

 

16 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 508   
@volvovalor8051
@volvovalor8051 5 лет назад
Doing the first wheel is fun. Doing all 4's get old pretty fast :p
@kevinellsworth9318
@kevinellsworth9318 3 года назад
It’s called doing the job , Rufus!
@volvovalor8051
@volvovalor8051 3 года назад
@@kevinellsworth9318 Ok?
@historys_cameramann5663
@historys_cameramann5663 2 года назад
Yeah lol try doing a dually
@juliopozo2824
@juliopozo2824 4 года назад
Nice to see a young kid doing work like this.
@alcolavista-22
@alcolavista-22 8 лет назад
this is the basic concept of DIY to make it things look nice.....its simply an awesome job..but I dont understand with all the people who dont appreciate the effort of showing the skills and the technicality of this gentleman....this guy one day will be a professional mentor...keep doing it buddy...
@rlo2367
@rlo2367 8 лет назад
ChrisFix also did a video on how to repaint rims and he did a splendid job.
@brayanpena9275
@brayanpena9275 8 лет назад
i liked his more
@user-iz2nv9kn1h
@user-iz2nv9kn1h 8 лет назад
Bubble Butt That's what I thought this was at first. I thought he did a new video.
@gedasalekveravicius5466
@gedasalekveravicius5466 7 лет назад
Nope you're not
@campervanelvisitoofonyou8720
@campervanelvisitoofonyou8720 7 лет назад
Bubble Butt Chris Fix has better videos
@daniel3188
@daniel3188 6 лет назад
"Rust is like cancer" leaves whole other side of rim and back of bead rusty and untouched, along with wheel weights.
@kai_291
@kai_291 8 лет назад
Milan you and Chrisfix have to make a collab because you two are awesome
@darkunicorn1208
@darkunicorn1208 8 лет назад
they really should. Their videos help so many. I even used their tips for my car lol.
@HeldigDansker
@HeldigDansker 8 лет назад
I agree they are both awesome, but Milan lives in Canada, and ChrisFix is in the US.
@kai_291
@kai_291 8 лет назад
Lucky Dane Yeah it would be pretty tricky.
@milanmastracci
@milanmastracci 8 лет назад
I think that'd be fun :)
@Googaliemoogalie
@Googaliemoogalie 8 лет назад
Kai -291 exactly
@Abdiel1178
@Abdiel1178 7 лет назад
I don't even own car yet and I still watch these vids , he always does top notch work.
@logelm3833
@logelm3833 7 лет назад
Mandingo Trotman How would you know this "top notch work" if you know nothing about this work
@Abdiel1178
@Abdiel1178 7 лет назад
Log Elm I think he is very thorough. and I think that says a lot.
@logelm3833
@logelm3833 7 лет назад
Mandingo Trotman Allot of the information is incorrect.. before you do any work like this I would reccomend watching multiple videos.
@Abdiel1178
@Abdiel1178 7 лет назад
Log Elm you sound like you know about this kind of thing . I will take your advice.
@Shadygbg
@Shadygbg 8 лет назад
Nice video. why didnt you remove the weight from the wheels? when you balance the wheels next time you will notice the old color.
@DavidB445
@DavidB445 8 лет назад
Right.. They are all going to need balanced again anyway.. using the flap disc removes some metal as well as the rust and paint and now it has 9 coats of paint, 3 of each can, so the weight will be all over the place.
@maxmoq8423
@maxmoq8423 8 лет назад
3 cans of each on 4 different wheels won't affect the balancing and also removing the rust and paint would change the balancing but would not be noticable as it would be such a tiny difference.
@harris8390
@harris8390 8 лет назад
Chadi Audi Yes.... the propery way would be to pry off the weights with a flathead. At that point youre gonna have to pay around $80 to have all 4 balanced again. Its really at the discrection of you.
@maxmoq8423
@maxmoq8423 8 лет назад
Where do you get charged 80$ to get balanced 4 wheels?? Here to get 4 tires changed on mags and balanced cost 50$ in total, and to only get 4 wheels balanced costs 15$ for all four.
@roberto9787
@roberto9787 7 лет назад
smart move
@Thunderbyrd.
@Thunderbyrd. 6 лет назад
I can't believe there are so many paint masters and experts in one comment section. It's incredible. I'm sure they all have there own channel where they educate the rest of us on the proper techniques of painting car wheels. I like the video. Looks like a good DIY project for a work truck most anyone can do. Well, except for a few haters in the comments, lol.
@kdigiacomo
@kdigiacomo 5 лет назад
Makes me laugh because if they "know it all" then why are they watching these? Just to pick on people I guess.
@imdabl
@imdabl 8 лет назад
Literally perfect timing. Buying and refinishing wheels monday
@JerniganRacing863
@JerniganRacing863 7 лет назад
awesome job, im always impressed with your videos. you do the job right the first time and explain it really well for anyone to do it themselves
@ResottoLP
@ResottoLP 8 лет назад
'Rust is like cancer' good comparison.
@hichemtahi2863
@hichemtahi2863 6 лет назад
Error 404 yup
@Thatguy-cf9qj
@Thatguy-cf9qj 6 лет назад
Troy oh stfu.
@lennym480
@lennym480 6 лет назад
Error 404 Cancer is what it's called when the rust has eaten through the metal. This is a hack job! Take off the weights from the rims before you paint it lol
@timmyturner4410
@timmyturner4410 3 года назад
@@lennym480 Not to mention he didn’t do the inner part of the wheel. That rust is just going to creep up and under the paint again
@carsonkomac7421
@carsonkomac7421 5 лет назад
Don't use an impact with a wire wheel use a regular drill
@rockinjohnny1199
@rockinjohnny1199 6 лет назад
Lots of criticism, but I bet none of them made a video trying to help out. Very nice job. Will be doing mine soon.
@mike.135i
@mike.135i 8 лет назад
perfect video. best youtuber for people who actually want to learn +1.
@johnslashinski957
@johnslashinski957 4 года назад
Very informative. You do a very good job explaining the process.
@cashonly6117
@cashonly6117 11 месяцев назад
Was looking for a video like this and had already seen about 5 that were so vague and uninformative. The best and most thorough wheel painting ever. Thank you. This could be a video for dummies, like the books. 😂
@fredjones5327
@fredjones5327 8 лет назад
Super cool you taught me something again!! Lol love it!!!
@pro_murderer3239
@pro_murderer3239 8 лет назад
You are getting closer and closer to 100,000 subscribers.
@milanmastracci
@milanmastracci 8 лет назад
Almost there :)
@ptlpszt1
@ptlpszt1 3 года назад
Excellent prep work
@franciscoavina1568
@franciscoavina1568 8 лет назад
should've used self etching primer on the bare steel. and sanding between the primer and base would've given a better finish
@sebbekartellen6493
@sebbekartellen6493 7 лет назад
I just got my car license!! I got it on the same day I turned 18! (I live in Sweden and you got to be 18 to get a license here) Anyway, I just bought my first car about 2 weeks ago. And I have already styled it and it looks really good. I have painted the rims black, and the brake calipers red. I have also put on a black racing stripe. And I have bought new "side mirror indicators". The car already had tinted windows and eyelids on when I bought it. I have a Volvo v50. Just wanted you to know xD
@hass1337
@hass1337 8 лет назад
congrats ON 80K YEAAA BOIII
@Faraonqa
@Faraonqa 8 лет назад
starts sanding doesn't remove balance weights
@jordanatchinson1769
@jordanatchinson1769 6 лет назад
EmptySergeant well yeah.. then you would have to go and pay to have your wheels balanced again dipshit
@fcaughli
@fcaughli 6 лет назад
Not if you do what knowledgeable people do, mark the weight locations. I think he may wanted to have the weights painted black also.
@Mahaney82
@Mahaney82 6 лет назад
So what happens when you get new tires or need to balance the wheel? All that time spent sanding and painting is wasted. So in the long run, is it worth it, Dipshit?
@horrordaniel
@horrordaniel 6 лет назад
Yea you always remove the balance weights because if you want your tires to last the full length you rotate and balance them every 7 to 8 thousand miles and chances are your gonna need to move the weights when you do so yes always remove the weights but other then that is a nice paint job
@kdigiacomo
@kdigiacomo 5 лет назад
@@jordanatchinson1769 - Nope, you just mark the tire where they go and put them back on "dipshit". Who feels stupid now?
@FCFordLord
@FCFordLord 8 лет назад
One important thing on these old style, pressed steel wheels that rust - check the welds. I had a set of 80's wagon wheels on my diesel that rusted at the welds on the back and started vibrating. Traded with someone that wanted the tires and scrapped the wheels, win-win for us both.
@skorik101
@skorik101 7 лет назад
Im binge watching your videos!!! Nice tips with the paper markers, I would of probable take the whole wheel lol!!!
@ToniaLeethesalmonmousse
@ToniaLeethesalmonmousse 7 лет назад
Go get that money kid your great at everything you do!
@hichemtahi2863
@hichemtahi2863 6 лет назад
Bro, you're a legend ! Keep it up !
@WikkedR1
@WikkedR1 4 года назад
Good video. My only critique is that an angle grinder is a bit too aggressive IMO. It can cause “waves” in the metal which, depending on the color you choose, might show in the finished product. When doing a project like this you HAVE to take your time. Shortcuts might save some time but the results are usually better when more patience is exhibited. And 🖕🏻all the haters. Keep doing your thing, young man!
@Colintheworldsgreatestplumber
He then went over it with many stages of less aggressive grit. You need something aggressive to get all the rust and grime off.
@FernandoCastillo-qq6pe
@FernandoCastillo-qq6pe 8 лет назад
good video but you should paint those center caps black also!!!!
@MarioHernandez-jj8fq
@MarioHernandez-jj8fq 8 лет назад
Fernando Castillo I was looking for this comment
@JonasGodwin
@JonasGodwin 8 лет назад
Fantastic video Milan!
@milanmastracci
@milanmastracci 8 лет назад
Thanks buddy :)
@boydmerriman
@boydmerriman 4 года назад
Those cards make it look like you got white walls on your tire! That would be a cool look on your truck! (I miss white walls) Personally, I think three coats of primer is a waste of paint and time, since primer is primarily used to help bond to the surface and after two coats (second to help cover perfectly) is no longer necessary as the surface is fully covered and you are just priming primer.
@sh6lby553
@sh6lby553 8 лет назад
You should make another video - How to turn painted wheels into polished/chrome . I see that after you grind of the paint of the wheel , you could use extra fine sandpaper to a near chrome state & apply metal polish to top it off.
@LUCAS.SOARES96
@LUCAS.SOARES96 8 лет назад
Awesome video, as always ! good job Milan !
@manfordwilliamson8145
@manfordwilliamson8145 7 лет назад
Well done, great narration!
@Jt96.
@Jt96. 8 лет назад
You did such a good job I had to subscribe
@luisitocolon2011
@luisitocolon2011 5 лет назад
Killed it bro... doin same thing to my dually rims
@vee4410
@vee4410 8 лет назад
Nice video. I would suggest that you spray from a little further distance so you don't get to much uneven spread.
@waris3732
@waris3732 7 лет назад
vee4410 was looking for this comment
@jeffbrown6243
@jeffbrown6243 7 лет назад
Is it a good idea to have the tires removed and paint the inside of the rims?
@superjustinnn
@superjustinnn 8 лет назад
Love your videos bro. Do you think you can make a video on what to inspect and how to do it when buying a used car?
@richardcoltman6313
@richardcoltman6313 3 года назад
well done my mate!
@milanmastracci
@milanmastracci 3 года назад
Thanks Richard! 👊
@str8facts960
@str8facts960 4 года назад
Great video thank you kindly for the post, very informative.
@LesCunliffe
@LesCunliffe 2 месяца назад
I got hold of a wire wheel for the drill that is plastic-coated. Was great around rubber as didn't tear up like a straight wire wheel.
@JustA_Messenger
@JustA_Messenger 8 лет назад
Hey man, I love your videos. I just bought a 84 Fiero it's bad I know but just thinking about the mods I can do I love looking forward to the next mod. Your videos really give some good knowledge.
@tattedvet8355
@tattedvet8355 2 года назад
?
@JustA_Messenger
@JustA_Messenger 2 года назад
@@tattedvet8355 yeah that was 5 years ago so I don’t know ether😂
@AeroMax2001
@AeroMax2001 8 лет назад
I'd like to see a follow up on this one (how long does it all last?), considering that it's just a cosmetic touch up.. (only the external face is addressed, nothing done to the inner face or the rim lip)
@anthonyforest3490
@anthonyforest3490 8 лет назад
Very nice bud!
@vincenteo20
@vincenteo20 7 лет назад
awesome video, very very detailed. thanks!
@AndreaPick
@AndreaPick Год назад
Great stuff, thank you.
@geeegeee
@geeegeee 5 лет назад
Nice detailed video.
@Ano_Ba_Girl
@Ano_Ba_Girl 8 лет назад
Lol watched all the way to the end... 3 uggua dugua hahahaha
@duanepowelljr9497
@duanepowelljr9497 4 года назад
Love the video
@WASABYpr
@WASABYpr 6 лет назад
wow it was fun to watch thanx 👍🤣
@paulkimble6267
@paulkimble6267 6 лет назад
Good job , good video
@TheWolverine-rm2kr
@TheWolverine-rm2kr 7 лет назад
Looks nice now you have to do it on the other three wheels
@anthonyschiavi1331
@anthonyschiavi1331 6 лет назад
I wouldn't grind on rims because when you do that it usually causes the wheel to become greatly out of balance.
@hardkore360
@hardkore360 3 года назад
that doesn't make sense to me, imagine all the mud and rust behind the wheel that throws the wheel off balance just as it is. If you then remove the rust, clean the inside of the wheel, and rebalance the tire, I dont see any issues with sanding.
@shaneisaacs1350
@shaneisaacs1350 8 лет назад
👍🏻 great video!
@milanmastracci
@milanmastracci 8 лет назад
Thanks Shane!!
@HowToDoitright
@HowToDoitright 5 лет назад
Safety tip: make sure deflate the tire before doing this. Imagine if you hit the tire and it burst on your face. You don’t want that. Also I hope you balanced the tire after using angle grinder.
@mrlaw711
@mrlaw711 6 лет назад
After the last primer coating what was the wait time before putting on the basecoat color black? Then, what is wait time before clear coat applied? The video didn't mention this. Good video. Ignore the negative people. They are simply wheels.
@pmotley
@pmotley 5 лет назад
Liked video, thanks. Didn't know the warm water trick. If painting with tired off, do I paint the inner part, or just clean and treat with Marvle's, or something?
@designertjp-utube
@designertjp-utube 5 лет назад
Hi! Great Video! Don't feel like reading thru all the negative comments below, and I'm sure this question already got answered. How long did you wait for the Black Paint to dry before you started hitting it with the Clearcoat?
@themikeyfrisco
@themikeyfrisco 8 лет назад
You listed a link for the scissors.. LOL!
@whydoihave6neutrals772
@whydoihave6neutrals772 4 года назад
Good scissors best brand I’ve ever owned will literally cut meat of a bone
@OrdraksTv
@OrdraksTv 6 лет назад
Hey man thanks for the guide i need this but i only have sandpaper to use with my hand and the wire brush too so i can paint my wheels with this and yes i have the primer the base color and crystal help me out here thanks and keep going with the guides
@KManHU
@KManHU 8 лет назад
Great detail! Thanks
@charliehiatt1132
@charliehiatt1132 5 месяцев назад
Good video, if I was going all the trouble I'd do the entire wheel though with the tire removed
@MrKaje72
@MrKaje72 8 лет назад
For all those concerned about the wheel weights: he likely doesn't care about the wheel, it's probably a scratch(that's what we call it in my shop), you do shit to it because you can or you need the practice. He did a fine job, sanding was ok, but everything else considered he's pretty masterful for so young.
@paulsikora5623
@paulsikora5623 Год назад
great video.
@zevach17
@zevach17 8 лет назад
Nice video!
@TCLynch-cc1zz
@TCLynch-cc1zz 7 лет назад
keep it up man!
@outlawedmedia4336
@outlawedmedia4336 Год назад
What about the wheel weights? Feel awkward just painting over them, What happens when they get moved?
@alongtimecoming5298
@alongtimecoming5298 4 года назад
Appreciate it you helped me a lot
@ffjokere3
@ffjokere3 6 лет назад
I just bought a new truck that has steel painted rims. Since the rims are new do I still have to sand the paint off or can I just paint over them? this is a work truck with the gray steel rims.
@evandickson19
@evandickson19 8 лет назад
If I use a matte black and then add a clear coat will it become glossy. Great video, no offence I hate glossy.
@michaelschausten4522
@michaelschausten4522 7 лет назад
If I'm not mistaken, they make a matte finish clear coat as well.
@coleswearingen2365
@coleswearingen2365 7 лет назад
You said 50% coverage... that was more like 95%
@logelm3833
@logelm3833 7 лет назад
Cole Swearingen Agree
@nickwiebe181
@nickwiebe181 7 лет назад
Rustoleum paint covers better than many other paints
@MuffinShadowStudios
@MuffinShadowStudios 8 лет назад
Hello love you're vids, very informative and thoughtful. Question, I have a 2001 VW Jetta with OEM grey alloy wheels. I would like to paint them white, would this same method work? or another method? Btw I've been watching you're VW GOLF series. 👌
@rayvenwulf935
@rayvenwulf935 7 лет назад
I work in a manufacturing warehouse where we paint amd laminate.. And we also have a woodworking shop and a metal shop.. When you spray.. You are supposed to start and finish each stroke off of the rim.. And never in heavy strokes that close.. To apply light coats.. You spray around a foot away and when you want to apply heavier coats.. Always a foot away and just do each stroke a bit slower to avoid runs and orange peel.
@haroldmeans5774
@haroldmeans5774 4 года назад
What about the wheel weights. If you have the tire rebalanced chases are the weights will be in a different location and you wind up with a place with no paint. What do you do about that spot ?
@danelsanchez8985
@danelsanchez8985 8 лет назад
i gotta admit it came out nice. looks like if it was done professionally.
@off-roadrcaddict4572
@off-roadrcaddict4572 7 лет назад
Nice job.
@olliecarr3157
@olliecarr3157 5 лет назад
Thinking about doing this to my wheels did it last well?
@travp1288
@travp1288 8 лет назад
To many haters in these comments, thanks for another cool video
@milanmastracci
@milanmastracci 8 лет назад
Cheers buddy :)
@eatitswift
@eatitswift 5 лет назад
Over explained but well done. Very useful
@Maxxis1941
@Maxxis1941 2 года назад
Contemplating whether to do this but it's November with damp cool air. Thoughts on doing this when it's 5-10°C with mid-high humidity?
@MrIndyjoe
@MrIndyjoe 5 лет назад
Great job young man! I am amazed at the amount of negativity guys have for someone who takes their time to produce a high quality video. Anonymity breeds courage I guess ...
@killerklown6905
@killerklown6905 5 лет назад
Kinda funny I subscribed and u got a notification 😂
@jessev4969
@jessev4969 5 лет назад
Im trying to remove paint and a little bit of rust on my trailer to paint it . will the flap disk work better and faster then the wire brosh ?
@TopGamingStudio
@TopGamingStudio 8 лет назад
Great vid!
@Jredding352
@Jredding352 7 лет назад
Hey great video I subscribed!!
@MrLeo7627
@MrLeo7627 4 года назад
Gloss , NOooooo. Satin , YeeeeeeS !
@NickBarrows
@NickBarrows 7 лет назад
i like the primer grey color! seal it! done :)
@Skeptical357
@Skeptical357 4 года назад
Does it really need 3 coats of primer?
@2015-j9e
@2015-j9e 8 лет назад
can you do a video on adding a fuse block to a vehicle, Sea Blue fuse block is what I have in mind to use in my truck.
@12vLife
@12vLife 6 лет назад
@9:35 nice tip! glad I saw that.
@Xbbgun12X
@Xbbgun12X 7 лет назад
Alright question, I know you made a video a while back about cleaning and waxing wheels (or at least I'm pretty sure you did) is there any special process to wax wheels that are spray painted or is it the same as regular wheels
@tyronemosley6810
@tyronemosley6810 4 года назад
Those tires are whats up...👍
@hunterhaynes
@hunterhaynes 8 лет назад
Hey Milan, what are your thoughts on plasti dip clear coat in a can?
@scottiemanners
@scottiemanners 6 лет назад
I'd paint the center caps black too, it gives the wheels a cop car look which doesn't look so hot
@derekhughes244
@derekhughes244 5 лет назад
Those hub caps should be painted black then they would look bad ass! Nicely done
@paulnelson5
@paulnelson5 7 лет назад
i havent finished the video yet so i dont know if you address this afterwards but shouldnt you have removed the balancing weights first because now when the tyres are changed the weights will more than likely not go in the same place so there will be the old tired white paint exposed
@axelpalacios3998
@axelpalacios3998 8 лет назад
Hey , Is there a chance of you making a vid on changing leds on dashboards anytime soon? Im wondering because on my 06 scion tc they are soldered on there
@AzeOfSpadez
@AzeOfSpadez 8 лет назад
So then just solder them on. Whats the issue?
@axelpalacios3998
@axelpalacios3998 8 лет назад
AzeOfSpadez Like Ive never done anything with soldering but I bought everything needed to do it myself but I would need like instructions on how to do it because I looked already for diy's but I can't find any that seem to be on what I want to do with my scion , because I don't which are the actual leds that I have to buy and the resistors thing gets me confuse
@AzeOfSpadez
@AzeOfSpadez 8 лет назад
Axl Mrtnz The resistors are built in already if they're LED. All you'd need to do is desolder the OEM's and re-solder in your new ones. Check out my 2004 Altima. Hated the original amber and did it blue lol. All i did was watch a whole bunch of soldering vids. Oh and i bought a used speedo on ebay with similar miles and used that instead. (in case i messed up- i didn't) Make sure your gauges aren't colored though, that could put a hamper on your project.
@mickymann7880
@mickymann7880 6 лет назад
Good job
@milanmastracci
@milanmastracci 6 лет назад
Thanks Micky! :)
@robertbambach2653
@robertbambach2653 7 лет назад
brillo pad works real good with rust
Далее
Cheap Rally Wheel Restoration!
16:56
Просмотров 59 тыс.
How to Paint the Wheels on your Car
12:16
Просмотров 17 млн
Eminem НА РУССКОМ💔
00:30
Просмотров 276 тыс.
Painting Steel Rims - Make them look a lot better!
17:23
How to Paint Your Wheels! - 5 Easy Steps!
9:40
Просмотров 381 тыс.
The Complete Guide to Painting Steelies
6:38
Просмотров 484 тыс.
Repainting Rusted Steel Wheels (Amazing Results!)
8:41
How to Paint your Engine Cover (ANY COLOUR)
9:33
Просмотров 256 тыс.
How to PROPERLY Paint Your Brake Calipers
14:26
Просмотров 2,3 млн
Super Rusty Spare Wheel Restoration
10:52
Просмотров 8 млн
I RESTORED STEEL RIMS AND MADE MONEY!
11:14
Просмотров 50 тыс.