Great job and great little helper. Cant wait to give this thing a go with my son on our Highlander we purchased last week that has a couple shopping cart dings in one of the door panels.
People have no clue the time and skill it takes to do PDR to a FACTORY finish. Nothing compared to this but hey spend $50 and do a hail car that cost $7,000 professionally done hail repair. You end up damaging your paint and leaving high and lows everywhere.
My car was hit by hail and, since it's a cheap Toyota Yaris, I don't want to pay a professional (it would probably cost half the car's value)...but now I'm inspired. Thank you for sharing!
@@JJBanueloswell i became a pro afther lot of shit i payd over time ... step by step came to the point when i start building several citroen ds convertible taking only engine bay and front fenders from donor citroens ... Now in the Gwagen bussines... Realising pdr so i can help and give support to my wife's job... Greetings...
So my brand new dodge was vandalized recently. Cost was nearly $7,500 to fix everything. I got the truck back and 3 days later my son opens his door and dings it against a tree. Just got this kit. Thanks for the video.
This was fun to watch, I'm inspired! Maybe sometimes on the small dents don't pull until the glue lets go, just pull a little and take the puller off, spray some alcohol and remove the plastic piece. Then you won't have to knock down so much. Nice job!
The popping sound of the glue releasing,sends shock through surface and helps promote material to form back into original shape,but sometimes the smaller dimples/dents can use your method:)
Good video. I have a question. It’s cold where I am. Will the colder weather cause issues if I attempt to remove the dents with this kit? Or should I wait for a warmer day? It’s in the 50’s-30’s here.
Yes if the body panel is cold the dent will likely be harder to remove. You can apply some heat to the panel with a heat gun or a hairdryer to help heat the dent your trying to remove.
So you would recommend this item that it works? My car is filled with door dings from people who don’t know how to open their doors or people backing up into my car sigh. Looking to buy a repair kit. Thanks
Walk a couple hundred extra feet when parking somewhere. It is well worth the walk. Also always return shopping carts. It brings you good luck to avoid one slamming into your vehicle
What is the difference between the clear glue sticks and the black ones? I just bought this kit, however, there are no instructions regarding the glue sticks.
They usually go by surface temps & category of strength hold. Clear ones are for cool surfaces & blacks are for hot surfaces. Both will work fine for fridge dents on
I accidentally backed up and made a small dent in my car that has been driving me crazy for such a long time... Found this tool on Amazon and found your video to learn how to use it. Thank you for teaching us how! (P.s do you think it’ll work on a bumper dent as well?)
I suspect u r going to regret teaching ur boy to put a dent in the test panel..lol..”Look how good I did Daddy!!, I dented your car in 10 places and I made sure it was when we’re out and not at home!!”
I just bought this kit and I don't know what i do wrong but i always pul up the whole thing plastic with glue on it. And with not a lot of pressure i can use my hands. Should i use less glue or is there any time that i need to w8? I was letting it dry for about 5 min. Thanks
Make sure the surface is clean of any oils & dirt & also surface temps of the panel your working with are warm. If the panel is cold the glue won’t adhere to it very well
@@JJBanuelos i have cleaned the surface really good. And preheat it also. How long should i w8 to pull? Glue always stays on the plastic it doesn't stick to the car. Should i polish it before?
@@JJBanuelos maybe it's bad glue, i have just read that temperature needs to be between 15-23°C and we have arround 28-30 right now. So maybe that is the reason?
My car got nailed by a hail storm 2 days ago, its 10 years old. I am thinking of repairing the damage by my self. Thank you for making this great video and giving me some self confidence to do it my self.
I think most PDR workers do warm up the metal. Specially if it's a cold environment and when it is something big they are pulling. And they warm it even more around the "crown" area (Where the metal has been bent).
@@usabro410 Thanks a lot buddy. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SMqtsIe5oqw.html pls check the link to see how I repaired a huge dent.It was my first time with these tools. Pls let me know what you feel about my work.
Thanks for the demo. I just received my kit yesterday and noticed no knock down tools. Ordered what looks like the same knock down tools that you did just three minutes before watching your video.