How To Replace 42RLE Transmission Valve Body Shift Solenoid Jeep Liberty Dodge Nitro 2008 2014 Hard

Подписаться 2,3 тыс.

Просмотров 23 тыс.

50% 1

If this video helped you and you feel like you want to donate, send Venmo tips to @Tom-Laconis or for PayPal please click or copy/paste this link:
www.paypal.com/cgi-bin/webscr...
This video shows how to remove the valve body with shifting solenoids from a 42RLE automatic transmission on a Jeep Liberty. This applies for 2008 through 2014 Jeep Liberty and Dodge Nitro SUV's.
Error codes: P0748, P0750, P0751, P0755, P0760, P0765
Symptoms: No error codes, hard shifting, bumpy shifting, delayed shifting, stuck in 2nd gear - safety mode
This video Copyright Thomas Laconis & Jim Stong, 2023
#jeep #jeepliberty #jeeprepair #42LRE #42rletransmission #transmissionrepair

Авто/Мото

Опубликовано:

16 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@albertvasquez20 Месяц назад

Where did you buy the valve body from

@henryhicks5886 Год назад

Think this will work if one second I had reverse with no issues from transmission to no reverse? Pcm and tcm already replaced after this happened.

@davejames2015 8 месяцев назад

I got a p0870 wonder if mines done or can I just do this (update worked great 👍) thanks man

@TheWorldAsSeenByTom 8 месяцев назад

thanks for sharing that info! Glad you fixed it!

@carlosmenendez9160 Год назад

Hi, I'm trying to lower the tab but it's stuck with the piece that has the spring. What should I do?

@alejandrogaming9465 Месяц назад

Im having trouble with the brown connector my hand doesn't fit to to get to it, did you take the drive shaft off aswell for the rear differential?

@TheWorldAsSeenByTom Месяц назад

we removed the trans crossmember and that helped lower the back of the trans and we could reach every connector.

@rmp608 Месяц назад

Hello, do you mean to put the transmission into low gear from the shifter inside the car...or do it manually from the underneath?? Thanks in advance.

@TheWorldAsSeenByTom Месяц назад

inside the vehicle, put the shifter in low

@rmp608 Месяц назад

@@TheWorldAsSeenByTom Thank you!! Owe you a cold beer!!!

@avilesx30 2 месяца назад

Hello..... thanks for the info. I have a question. How can you tell the accumulators left and right or it doesnt matter what side ? Are they the same? Today is may 18 2024. Thank you in advance.

@TheWorldAsSeenByTom 2 месяца назад

if I remember they are both the same size, but I made sure to put each in the original spot should there be any wear. I do that with everything tho.

@jonalambert90 Год назад

Where did you order the valve body from? Is it dependable?

@TheWorldAsSeenByTom Год назад

I bought mine off eBay. There are some people who remanufacture these. Check their feedbacks to see who does a good job. I was pressed on time, but if you have time you can order a shift solenoid kit and do it yourself. Theres screens and build up that need to be cleaned inside the valve body.

@alejandrogaming9465 8 месяцев назад

Im trying to do this but my jeep Liberty does not have Low only 1 and 2 do i put it in second gear or first gear for low?

@TheWorldAsSeenByTom 8 месяцев назад

put it in the lowest gear

@dougdileo4727 Год назад

what is tow mode

@TheWorldAsSeenByTom Год назад

tow mode when enabled does not allow the trans to go into 4th gear. theres a button on the dash for it. Its in the owners manual to find your exact location of the button.

@johnringoo756 11 месяцев назад

How much time in total did it take

@TheWorldAsSeenByTom 11 месяцев назад

around 2-1/2 hrs.

@johnringoo756 11 месяцев назад

@@TheWorldAsSeenByTom ok. Thank you

@ProblemSolverGarage 4 месяца назад

What do you mean by put the transmission in low? Do you mean in first gear ?

@TheWorldAsSeenByTom 4 месяца назад

yes

@worldtraveler419 10 месяцев назад

You skipped over the hardest part of this process. Removing the clip on the right side. You showed it, but made it seem as easy as can be. Not easy at all. Also, there aren’t 2 clips on the drivers side.

@TheWorldAsSeenByTom 10 месяцев назад

thanks for your feedback. I didnt show that because its a common slide the clip sideway, press the tab and lift connector. I believe every single electrical connector on this and every vehicle is made that way. Also, once you lower the trans rear, it is very easy to see and do this. No tricks required. Its almost impossible to do without lowering the rear of the trans.

@Mebn2cooler Месяц назад

@@TheWorldAsSeenByTom some remove the Cat :( yuck exhaust work)

@bananariverrods1046 11 месяцев назад

You didnt show any information on the shift solenoid, which is what this video is supposed to be about.

@TheWorldAsSeenByTom 11 месяцев назад

the video is about replacing the valve body. I show where the shift solenoid is on the valve body. You cant get to the shift solenoid without removing the valve body or skipping any steps in this video. The shift solenoid is held on to the valve body by a couple screws. Swapping the shift solenoid shouldnt need any explanation if youve gotten this far.