How to Replace a Broken Temp Sensor Thermistor Volvo XC90 Climate Control Module | S60, S80, XC70

Подписаться 3,3 тыс.

Просмотров 46 тыс.

50% 1

How to Replace a Broken Temp Sensor Thermistor on 2010 Volvo XC90 | 1999-2007 S60, S80, XC70, V70
Complete walkthrough changing the thermistor on a 2010 Volvo XC90. This applies to all P2 Volvo cars ranging from years 1999-20014. This is how to potentially fix your volvo climate control module if it is too hot or too cold. This will get your Volvo heat or Air Conditioning working.
You will need an NTC (Negative Temperature Coefficient) resistor for this. You CANNOT use a PTC Resistor here. Any thermistor will work that is 10K ohms @ 25C. Below is a link to the one I used.
Thermistor: amzn.to/3Vek58E
Email: Mattdiy@aol.com
Facebook: / mattdiy1
Instagram: / mattdiy1
#MattDIY #Volvo #diy
As an amazon associate, I earn from qualified links.

Авто/Мото

Опубликовано:

10 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@matt-diy 2 месяца назад

Hey All, here is an updated link to a thermistor that will work! Thermistor: amzn.to/3KdqDyb

@e60power1 Год назад

its sad there is not much videos and support on line for the xc90s. Thanks for your videos. great job!

@matt-diy Год назад

Thank you for watching!! Glad it was helpful!

@TheTrothKeeper Год назад

Thank you for walking through this process. I have to do this on our 06 V70 as the temperature is all over the place... And re-solder the fan volume resistor connections.

@patrickhannam2353 6 месяцев назад

looking this car 2008 only drawback is no hot heat or cold cooling. your video gives me insight into the issue, with a possible $7 part as the solution. makes me feel more confident about the risk of buying a car with issues. nice job on the video. only showed what needed to be straight forward .even showed we all fumble through new tasks , but it doesn't stop use from doing something just because we haven't before. liked and will check back in again thanks😊

@matt-diy 6 месяцев назад

Thanks for the comment!

@lzh3131 Год назад

Oh crap… I did the same thing! It was a little chilly on my tour from Texas to Colorado to KC and back, no wonder my feet were freezing! I just stumbled onto your video. Thank you for the great instructions. My seat belt locked up, so I have to take it apart and send it off, order this part…then put it all back together. I’m having that Love / Hate issue with this vehicle 🙃 p.s. luv steeler lanyard

@matt-diy Год назад

Yeah it’s easy to mess up! Good luck with the fix and putting it back together!! And thanks! Haha go Steelers!

@civic3g Год назад

Thank you very much. I fixed Volvo S60 cabin temp sensor with 10k thermistor and now temperature control works just like it should be. Before the fix heater just gave very hot or very gold, nothing between those :D

@matt-diy Год назад

Your welcome thanks for the comment!

@THiggins130388 2 года назад

I've not broken my thermistor, but I need to clean mine out & I'm anticipating breaking it. So I've made sure to watch your video before my rough impatient hands have a go.

@matt-diy 2 года назад

Good luck!!! It is very brittle be careful!!

@THiggins130388 2 года назад

@@matt-diy just got it out & done now. No breakage. Spent more time watching your video than doing it, but if I never watched the video I wouldn't have known what to do. So thanks very much for the upload!

@matt-diy 2 года назад

@@THiggins130388 glad it helped!! Thanks for watching!!

@JaimeJasso-de3dw 2 года назад

@@THiggins130388 There is a spray cleaner which is really good for electronics, it’s called: DUST OFF… Highly recommend for keyboards, computers and many kind of electronics… You’ve mentioned that you already fixed your unit, but this can be useful in the future…

@THiggins130388 2 года назад

@@JaimeJasso-de3dw cheers for the heads up! I'll get some to save the dust building up again.

@darbydreher9537 Год назад

Thank you for your insight. I will give this a try. Purchased my 06 xc90 v8 used and it came with fluctuating hot/cold air on passenger side only. And it sounds like a puppy grunting. I looked at thermistor and it appears to be missing. Just a wire left. Hopefully this corrects the issue so my passenger doesn't freeze in winter.

@davidboyd8087 Год назад

Thanks that was a big help! Now for a AC re-gas 🤞🤞

@matt-diy Год назад

Your welcome!!

@green122s Год назад

Very well done. Thanks for doing this!

@matt-diy Год назад

Glad it was helpful!!

@butterfieldestates3346 7 месяцев назад

I found your link. Thanks so much great video really appreciate your help.

@matt-diy 7 месяцев назад

No problem! Glad it helped you out! 😊

@butterfieldestates3346 7 месяцев назад

can you post the link for the ther-mister and possibly new light bulbs. I will try and find on ebay. thanks so much.

@philipthompson5346 Год назад

Definitely like the video it helped me out a lot, I need to know where you got those wires from so I can go ahead and put them in mind myself. I got my tore open so I know they had broken half there on a power surge I had with trying to jump a dead battery. Mostly appreciated if you could and let me know thanks

@matt-diy Год назад

Link is in the description!

@timbermansam Год назад

Great video. Can you explain the correlation between the service airbag message and the battery? Curious because I just changed my CEM and now have the message. I disconnected the battery prior. Also, my blower suddenly stopped, now it’s working again! Do you think it has to do with needing a computer reset/camba? Thanks!

@matt-diy Год назад

Thanks!! You will need to reset the computer with Vida. The reason is because of the vehicles CAN network, all the modules are connected to each other and if one is missing the SRS system shows a failure. Also when you changed your CEM did you have it programmed for the car? Sounds like not.

@timbermansam Год назад

Thanks for the reply. Very interesting! I’m new to these cars. I sent my failure prone CEM out to Xemodex inc. they pulled the info from it and swapped it over to another CEM. They add a couple of heat sinks to help mitigate the overheating issue. They state it’s plug and play, but I suspect not. So I definitely need to get the computer reset then it sounds like. I just thought it was odd I wasn’t having these issues prior to installing the replacement CEM.

@matt-diy Год назад

@@timbermansam ah okay if you got it from xemodex you are good!! Maybe just missed a plug or something? But if you have Vida you can easilly reset the airbag error assuming nothing is actually wrong.

@jameshunter3980 Год назад

How much does the vida cost and where to get it? Our heater fan stopped working. I used canned air to clean sensor. It still did not work but the next morning it worked fine all day but has not worked since. Any suggestions appreciated.

@BarryMaduegbuna-rn2tq 11 месяцев назад

Wow you did a great job, please can it the reason why my 2005 Volvo xc90 blower not producing air?

@matt-diy 11 месяцев назад

That is probably a bad blower motor resistor! Fairly easy replacement.

@BarryMaduegbuna-rn2tq 11 месяцев назад

Thank you so much

@willmill409 Год назад

My heater on 08 xc90 blows warm then cold for like 2 seconds then warm. It goes back and forth in same intervals or pattern. Wondering if this could fix it

@matt-diy Год назад

I haven’t heard of that issue but might be worth a try!

@OlleBurman 2 месяца назад

Hi! Link is not working anymore, not for me at least. Can you link it again? Can’t seem to find a correct one. Thanks!

@matt-diy 2 месяца назад

Check now I updated it!

@Mark-is9dx Год назад

ViDA advised the cabin temp sensor signal too high / signal missing. The blower motor isnt working, is this a symptom on your car?? I've not got any other codes on the ccm

@matt-diy Год назад

No, my blower motor was working fine but I believe I did have the temp sensor signal missing. Sounds like you may have a blown fuse or bad blower motor resistor.

@Mark-is9dx Год назад

@@matt-diy in the end, I found it was a dodgy multiplug going into blower motor. I saw there was a black residue around the earth terminal. I'd changed resistor anyway, and changed the plug and all is well. The cabin temp sensor was also broken. Bought a second hand ccm from a S80, and took the sensor from that

@matt-diy Год назад

@@Mark-is9dx awesome glad you got it figured out!!!

@leifbjarnemland9861 Год назад

Takk for presentasjon What is the spesifcation of the Thermistor and where to by it ?

@matt-diy Год назад

Please look in the video description.

@heribertfranz5307 2 месяца назад

Hi, can I take a Theoristor that is from 55C till 125C , or must it be only one that is 25C ? Are they 1% or 5% ?

@matt-diy 2 месяца назад

Honestly I am not sure, I believe they must be the same.

@chrisdoe6890 2 месяца назад

Would this impact the AC not running super cold ? I recently acquired the car and weather getting warmer . The AC is cold but not sure if it needs a charge or if this thermistor fix would impact it ?

@matt-diy 2 месяца назад

It could be! It could also be that your solenoid valve isn’t working I have a video on that as well!! I would check your solenoid first.

@chrisdoe6890 2 месяца назад

@@matt-diy thanks Matt for reply> do you have a link to that solenoid valve video? I did a quick scan of your videos and cant seem to find it.

@matt-diy 2 месяца назад

@@chrisdoe6890 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qX2sFkpmYZs.html