Disclaimer:
Under no circumstances will Paddy’s DIY be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Paddy’s DIY or a third party.
In no event shall Paddy’s DIY be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Paddy’s DIY, it cannot guarantee against improper use or unauthorized modifications of this information.
Paddy’s DIY assumes no liability for any property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Paddy’s DIY recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Paddy’s DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Paddy’s DIY.
Please like and subscribe. Post a comment and please consider buying me a cup of coffee or a beer by donating with the super thanks button :) Thank you!
Paddy's DIY - How to replace a cockspur handle on an old aluminium window
Another great instructional video brought to you by Paddy's DIY
In this video I’m going to show you how to replace a cockspur handle on an aluminium window
This is a cockspur window handle, and they are usually found on aluminium and old uPVC windows. The spur on the handle closes down over a plastic wedge on the window frame to close and lock the window. Cockspur window handles come in a number of heights. 21mm, 17mm & 13mm are usually found on old uPVC windows and 9mm are usually found on aluminium windows.
With aluminium windows the window handle will nearly always be fixed to the sash with rivets. And the window handle will nearly always be fixed immediately in front of the glazing. So before we start we need to take the appropriate precautions to prevent breaking the glass. I remove the bottom glazing seal and I can see there is enough room to drill out and remove the old rivets. This gap will differ from window to window. It is so easy to accidentally break the glazing when replacing a cockspur window handle. I would definitely recommend taking out the glazing, replacing the handle and then refitting the glazing.
• Remove the bottom rubber glazing seal with a flat screwdriver.
• Use a paint scraper and put it in the gap behind the handle. This will protect the glazing as you drill off the rivets.
• Next fit a metal drill bit into your drill. This is a 5mm drill bit. And carefully drill the heads off the rivets.
• Remove the old handle base and remove the remains of the old rivets.
• Drill out each hole
• The new handle lines up exactly with the old holes. Line up the new handle and fit a rivet into the hole, the rivets I’m use are 4.8mm diameter. It is essential you choose the correct length rivet. Too short and the rivets will pull out. Too long and they can break the glazing
• Pull the rivet using a riveter. Repeat on the remaining holes.
• Push back in the rubber glazing seal
• Test the operation of the handle and to finish off, fit the cover cap
As you can see the window is difficult to open and close, this is because the hinges are broken. This is the reason the existing handle broke in the first place. All the extra force used to open and close the window when the hinges are broken is put on the window handle causing it to break.
29 авг 2024