No video :(

How To Replace a Honda K Series Serpentine Belt Tensioner

Подписаться 1,8 млн

Просмотров 105 тыс.

50% 1

Is your Honda K series making a horrible screeching noise? It might be the serpentine belt tensioner. In this video I show you how to replace a bad serpentine belt tensioner on a Honda K series engine. I'm doing this job in a 2004 Honda Element, but this method should work for most Honda K series engines.
Unfortunately I couldn't find the info on my former tensioner that went bad. This is the one I replaced it with.
Dayco Tensioner: www.amazon.com/Dayco-89321-Be...
Hopefully it lasts longer than its predecessor. For best results, I recommend the Honda part, but it does come at a price.
Honda Tensioner: www.hondapartsnow.com/genuine...
The best place for answers to your automotive questions: www.ericthecarguy.com
Check out the ETCG Blog for the latest info: www.ericthecarguy.com/blog
Check out my ETCG1 channel: / etcg1
Thanks for watching!
Discussion about this video: www.ericthecarguy.com/kunena/...
Tools
Long 12-14mm wrench: store.snapon.com/Standard-Han...
Related Videos
How To Replace a Honda K Series Starter the ‘Easy’ Way: • How To Replace a Honda...
Honda Element & CRV Alternator Replacement With Diagnosis: • Honda Element & CRV Al...
Honda Element/CRV 110K Service (Part 1): • Honda Element/CRV 110K...
Honda Element/CRV 110K Service (Part 2): • Honda Element/CRV 110K...
How To Reset Honda Element Maintenance Light: • How To Reset a Honda E...
Honda K Series Valve Adjustment: • Honda K Series Valve A...
Honda Element/CRV Thermostat Replacement: • 2004 Honda Element/CRV...
How To Change Power Steering Fluid Honda Element: • How To Change Power St...
Honda Element Front Stabilizer Link Replacement: • Front End Noise, 2003 ...
Honda Element Lower Control Arm Bushing Replacement: • Honda Element/CRV Fron...
Finding and Repairing Rear End Noise Honda Element: • Finding and Repairing ...
Honda Element Hood Cable Replacement: • How To Replace a Honda...
**Answers to your automotive questions found here: www.ericthecarguy.com/faq
Social Network Links
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Google+: plus.google.com/1001951801966...
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Опубликовано:

12 апр 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 310

@AP9311 6 лет назад

Eric, I like your style of video! With the added words like 12mm etc. That helps a lot! I've done hundreds of those over the years. Some are easy, others not so easy. Every car is different. Many thumbs up from me, Eric! Great video! 👍👍 👍

@ketoninja 3 года назад

I think I've watched this video like 12 times already because I'm doing my Element's starter, serpentine belt, tensioner, and alternator all at once and I need to keep all of the fasteners straight. Thanks 👍

@D0csavage1 6 лет назад

It feels good when on the home run, you start putting everything back together with the new part installed.

@malcolmyoung7866 6 лет назад

Nice job, Eric....you are keeping me dry and out of the rain that's falling here in Marbella, Spain.....Have followed you for a couple of years now(a late subscriber) and you have been inspirational in making me want to fix my old Jag....and my daughters 4 X 4 and my VW Van and my....I could go on!!

@ericthecarguy 6 лет назад

I'm happy to hear that! Thank you for watching and for your comment.

@00Papyrus 5 лет назад

Man this video saved my butt, the stealership wanted 530 bucks for this with parts...i got the whole tensioner ans a belt for a hundo. Looks like it can break four more times before ice reached the dealers price!!! Eric youre the man!!!! Thanks for the video, my 06 crv never sounded so saucy!!!!

@averyalexander2303 2 года назад

Quick tip. If this ever happens to you, there's no need to replace the entire tensioner assembly. You can simply unscrew the 14MM bolt in the center of the pulley and change just the pulley, that's what is making the noise. As usual, an OEM pulley is ideal. The part number for the pulley is 31180-RAA-A01 and it is currently about $30 from Honda.

@gruberhoffman Год назад

I wondered about doing this as there seems to be no problem with the tension part; it seems that my problem is a bearring issue with the pulley. I even wondered if pressing out the old bearring and installing a new one could be done without too much fuss on a 2003 Honda CRV.

@averyalexander2303 Год назад

@@gruberhoffman If it was mine, I'd just get a new OEM pulley and be done with it. Replacing the bearing separately is theoretically possible, but in my opinion, the difficulty of finding one of the exact right size and the potential for a problem if something goes wrong is too high to take the risk when a new pulley is only about $30. If it fails, you will be stranded and ruin the engine if you don't stop right away before it overheats.

@FridlundFam 3 года назад

Thanks Eric. Once again your videos has saved me when servicing the wifes 260 000 km 2002 crv beater.

@axenz1 6 лет назад

People like to watch Eric video when he repair Honda only. Thanks for the come back Honda repair video :)

@fooey88 6 лет назад

This looks a lot easier than it used to be on my 2003 Acura TL. Great video.

@racerxnk 6 лет назад

Like the new camera work. Breaking out the old air tools for this one too:)

@BorisFett 6 лет назад

I like the changes you made to how you edit with the bolt sizes and multiple camera angles.

@SmittySmithsonite 6 лет назад

I miss the days when a "belt tensioner" was a prybar, a 1/2" drive ratchet, or hammer handle. And I had to WALK to the bus stop, uphill BOTH ways, in the snow! 😁

@buildburnrepeat1789 9 месяцев назад

Always timeless help. Thank you for helping me for so many years

@poopsiclesz 6 лет назад

I love your videos. I'm subscribed to both channels and always watch every thing you put up. I may never do a tensioner on a K series Honda, but you're videos are just that entertaining to where I don't care. Regardless of the topic I do always get something out of it however. Great work.

@ericthecarguy 6 лет назад

I appreciate that very much. Thank you!

@michaeljohn8905 6 лет назад

Eric you seem like a dude I’d have a beer with. Thanks for all the videos and great info. You have helped me get through Yamaha Marine University. I always use you and Scanner Danners videos for studying and reference material. I’m a avid subscriber and always like your vids. Thanks again for taking the time to do all this. You are a damn good tech and instructor. Mike ,Stillwater Marine ATL Georgia.

@ericthecarguy 6 лет назад

Thank you!

@parkerscholz6454 6 лет назад

It's good to see that you're trying new things. The new thumbnails really pop. Good video Eric.

@ericthecarguy 6 лет назад

Thanks for noticing.

@maxineaustin1282 5 лет назад

Thanks for showing the difference between a new and old serpentine belt tensioner.

@nos1000100 6 лет назад

I had to do this to my old doge dakota. The ball bearings here falling out of the pulley. All i did though was change the bearing as i didnt feel like paying for an entire assembly. I learned that tick from you.

@toddprice6606 6 лет назад

Awesome video you make things look so easy thanks again

@ronwatson4902 6 лет назад

Great video and fun to watch.Take care Eric.

@trundlepufpendants 5 лет назад

Also applies for Acura RSXs - same engine mount and everything

@ncc74656m 6 лет назад

There ya go Eric, nice and quick, job's a good one.

@heribertogomez5191 6 лет назад

I'm glad he came back to make videos

@robertwright5487 6 лет назад

My impression, and experience is that a lot of the after market repair parts don't hold up well. Even some of the factory repair parts. Thanks for the video!!!

@ericthecarguy 6 лет назад

I agree. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wC2MZNY1Ie8.html

@Tool0GT92 6 лет назад

This spring I want to do the thermostat, water pump, tensioner, and drive belt on my CRV. Thanks for all the help.

@ericthecarguy 6 лет назад

I have videos on all of that for the K series except the water pump. See the description. Good luck.

@mr.nobody4900 5 лет назад

Extremely highly informative video. Thanks Mr.

@THEGREATONE420 6 лет назад

hell yeah man really appreciate these K-series videos.

@TheDerrty111 6 лет назад

Who would give this man a thumb downs?? He's the best!

@ananymous2903 5 лет назад

Ignorant internet fools would. This is a greatly helpful video.

@semco72057 6 лет назад

I am glad that my truck engine isn't that cramped with my 5.4 Liter engine. I saw why you had to remove the one pump out of the way just to get that part off.

@ericthecarguy 6 лет назад

Wait till you see what I have to do to the Mini I'm working on now to do the clutch and fix some oil leaks.

@workinprogress5936 6 лет назад

I like how the new videos are coming along. Since you are doing lots of Honda's mind doing a water pump install on an H22A4. Mine needs to be replaced

@ericthecarguy 6 лет назад

Aside from the DOHC, it's the same as this procedure. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r08PToVy4f0.html

@doejoe5939 6 лет назад

great vid Eric keep them coming

@Ghostdog4 4 года назад

Great Video and glad I watched. Same Caahh (Boston) and I have to get to that VTEC screen/filter behind the Power Steering pump and now I at least know what I'm going to come across. Thanks ETCG

@costalamb3065 3 года назад

That's a pain in the ass to get to.

@jhuntosgarage 6 лет назад

Watched, liked, sub'd. Well done. Has anyone ever figured out the mid 80s Hondas? Dual carbs and all the vacuum lines were a nightmare!

@ericthecarguy 6 лет назад

Thank you! I've worked on plenty of mid 80's Hondas. I've also owned 3 of them. Not that bad really, but tedious.

@Hotdrboy88 4 года назад

Like your videos a lot man. You inspire me !

@nongrelax771 6 лет назад

Nice eric.. You nailed it again

@Perly53 4 года назад

As always Eric - thank YOU so much!!! Best wishes. Rick

@JDL_MobileRepair 5 месяцев назад

I’ve done this before on my previous 05 Accord in a Walmart parking lot with Walmart tools LOL. Now that I have a driveway and higher quality tools, I needed more confidence to give this job another shot on my 14’ CRV haha. Funny how it goes when you’re young and blindly confident

@AcuraAddicted 6 лет назад

Engage! LOL. Thanks, Eric! That was educational AND entertaining, as usual! Thankfully, I won't have to deal with the engine mount on my MDX when I will be replacing the tensioner, so it's going to be much easier for me.

@ericthecarguy 6 лет назад

Yea, you have a bit more room. Good luck and thanks for the comment.

@macro820 6 лет назад

Glad to see you still posting videos. Any plans on more fixing it forward? Or any repairs besides your own cars haha

@ericthecarguy 6 лет назад

You need to read my monthly newsletters. Here's April's www.ericthecarguy.com/blog/2145-april-2018-newsletter

@Helio4k 6 лет назад

as always excellent Video, Thank You

@Carguments 6 лет назад

Dude makes this look easy.... I’m about to go get me some parts! Lol

@MrEyad1990 6 лет назад

Hey it's I your friendly long old almost 4 years subscriber .

@ericthecarguy 6 лет назад

Happy to see you.

@chickenchoker9000 6 лет назад

Those Gp sockets are awesome!

@G13BBPower 6 лет назад

One of the first Hondas where I think thats not easy. Damm this is close.Love the old Civic EKs.

@soniaoconnor6745 2 года назад

“C’mon you can do it! Find your home!” Love it! 😄

@mzu2787 6 лет назад

Excellent work Eric. Greetings from New Zealand.

@4KMUSICINC 6 лет назад

Mzu 278 glad to see another NZ veiwer 💪🔥👌

@mzu2787 6 лет назад

4K MUSIC INC me too.hope all is well.

@ericthecarguy 6 лет назад

Hello New Zealand!

@extremeliberty7890 6 лет назад

Love your videos man

@user-ml2tp8no6m 6 лет назад

That is realy great video

@d07s 6 лет назад

Great video, thanks 🔧👍🏼

@ScubaCat3 6 лет назад

I'm surprised ETCG didn't bust out the T-handles for some of those fasteners. Although the engine stuff can be super tight. Thanks for the video as always!

@ericthecarguy 6 лет назад

Not sure if I had them when I originally shot the video over a year ago.

@OpporTUNAtySportfishing 5 лет назад

Awesome as always. You may my diy life easier and cheaper, that’s for sure.

@aaronphx420 6 лет назад

We got your back Eric

@ericthecarguy 6 лет назад

Thanks!

@nite82hawk 6 лет назад

I have an 05 CR-V with the same engine and I have some hesitation when going around 35-40mph. I'm going to clean the maf sensor and throttle body to see if that helps. I also want to replace the vtek spool gasket and screen. Would be awesome to see a video on changing those out. 😁. My issues could just stem from the damn thing having 313,400 miles! 😮

@oldhousemark 3 года назад

Thanks for the video. Ever have to replace the main drive deal? I've got an oil leak that I'm pretty certain is coming from there.

@aaronphx420 6 лет назад

Eric, I need your help...I watch this video on RU-vid about how to tell which wheel bearing is bad on a car and I determined the front right based on this guys video. The noise goes away when turning right and gets worse when turning left. I replaced the front right on my CB7 which as you know is no easy task and now I have the same symptoms but it has always sounded like it’s coming from the front left. Should I just replace the front left wheel bearing and eat the cost or could it be something else. I should post a video so you can see it, or hear it actually.

@lonwillis783 6 лет назад

THANK YOU THANK YOU i already did mine but THANK YOU THANK YOU THANK YOU

@ericthecarguy 6 лет назад

Happy to help. ;)

@richardquinones2959 6 лет назад

Nice Eric love the video

@Garix_Drums 4 года назад

I did it without removing engine mount, just removed tensioner's pulley and it gives room to remove tensioner, then did backwards: tensioner, pulley, PSP. It's making work easier and faster.

@solucionesalvas8180 5 лет назад

Buen video amigo 👍🏻

@georgebonney90 6 лет назад

Great video thx etcg

@misteramerica5893 5 лет назад

Would you suggest just changing the pulley? I bought a used auto-tensioner for my K20 Jackson Racing Supercharger setup and thought I could get by with just changing the pulley.

@TheProAer 5 лет назад

I have a 2017 Accord 6 speed Manuel I have had to have my tensioner fixed twice since I've owned the car. It would make a loud whining sound. I have the new direct injection K Series. I'm not sure what my opinion is on the new direct injection K Series

@MJ-fk6yg Год назад

thanks. do you usually condition your belts before installing?

@lh98 2 года назад

Can these cause loss of power at idle and while driving? My crv 2010 has an odd sounding whine when it looses power during idle that I can hear happening exactly when the idle drops low. Wondering if belt tensioner/pulley being bad can torque down on the motor while running ??

@gainesinlife 6 лет назад

Hey Eric what is that hood light mount thing you are using called. It looks really handy and I would like to purchase one because I find myself working on my car at night a lot and i dont have a garage!! Thanks!

@bentnickel7487 6 лет назад

Like watching a surgeon do an appendectomy. Bolt sizes and camera angles take extra effort and I for one appreciate it.

@miker.5495 4 года назад

Is that Dayco tensioner holding up? I have to replace the tensioner on a 2009 CRV. Thanks Eric

@TheStwat 6 лет назад

Hi Eric. Was that play in the gearbox mount I noticed at the end of the vid, when you started the engine?

@Alvaresmaico20 4 года назад

@Ericthecarguy i changed the tensioner assembly its all quiet until i put it on Drive and move the steering wheel that the new tensioner rattles and makes noise. What do you think i did wrong.

@jasonv1144 6 лет назад

Where do you jack up a 92 foxbody? Also do you place the jack stands on the pinch welds or else where? Thanks

@user-qp3pc3xt1g 6 лет назад

Good job

@ForTehNguyen 6 лет назад

did this on our 2004 TSX, was a lot easier since it had enough room so you dont have to remove the PS pump and engine mount

@AR-uj3js 2 года назад

Hey did u notice or feel the alternator or power steering punt pulls hot very hot if so what cause that I change my belt and belt tensioner do u think the tension have too much tension and how do I adjust it

@ZeroKool360 Год назад

Hey Guys. NEED SOME HELP. I stripped the center bolt on the tensioner and the 2 side to side bolts are good... Its a bit snug but i see it let loose when i was torquing and my hand slipped and there it went.. What do you guys recommend?? Does that center bolt require to much torque its a bit snug on there....

@jgarb21 2 года назад

Can the just the black Belt pulley be replace. and not the complete mounting bracket and pulley?

@garyburgess7980 6 лет назад

Can you post a video of how to replace a clutch if you get that opportunity. Thanks

@curierfromxibalba1155 6 лет назад

looking at this makes reemplacing the tensioner in my Grand Marquis a walk in the park.

@durwoodrobison7800 3 года назад

So how's that Dayco tensioner holding up? I have to do the belt tensioner on my 03 RSX Base, and the Dayco is much less expensive than the Continental, but not a lot of reviews.

@barcaswagg243 5 лет назад

Did you use OEM tensioner? I tried replacing the tensioner but the belt keeps shifting over 2 teeth idk what the problem could be. Yes he belt is the right one. Yes the tensioner is new. Yes the belt is on the right path. No nothing wiggles it just slides off after 20-30 minutes of use

@matthewrobinson4384 Год назад

Hey Eric. So I replaced my belt tensioner but accidentally broke the long middle bolt. Is it safe enough to not have that bolt? If not do you know where I could get a replacement bolt?

@Brady_H 5 лет назад

I did the same thing with my rsx but now the belt isn't lined up straight, it squeaks while driving when its reset, then at high rpms the belt jumps and then isn't aligned right with the grooves. Any ideas?

@nitrospark1374 6 лет назад

now you wanna make this vid when i had a serpentine problem last week

@ericthecarguy 6 лет назад

Sorry.

@nitrospark1374 6 лет назад

EricTheCarGuy its ok, youre still my idol, love ya eric

@nitroace09 4 года назад

is there any possible chance that you have a part number for the belt tensioner please.

@psdaengr911 2 года назад

One thing that wasn't emphasized enough is how long that 17mm stud is. As a DIYer who buys specialty tools ONLY when necessary, I don't have a set of EXTRA deep metric sockets. 75mm deep is needed. The ONLY socket I could find, that wasn't part of a +$150 set,was CTA Tools 1717 Extra Deep Socket - 17mm. Also for a DIYer to do what you did, they'd need to jack the car up, remove the left front wheel, lower the car on a jack stands THEN support the engine with the jack. I did mine without removing the motor mount. I tried a dozen times to get the belt where it needed to be and was stymied each time by a twist or slack I couldn't see that stopped me from being able to get it over the last pulley. Finally I folded the belt nearly flat and shoved it down between the tensioner and water pump with a stick. Then I pulled it down over the main crank, temporarily it looped over the power steering pump to keep it in line and couldn't fall or get twisted while I got the belt around AC compressor. Removed it from the power steering pump to get it around the alternator pulley, then went for the tensioner and power steering pulley.

@gabriellord7556 6 лет назад

That safety glasses thing, immediate like

@jawaone2474 2 года назад

What’s the torque spec on tensioner pulley and ep3 pulley on builds? Are they both 16ft pounds?

@messybench Год назад

Thanks!

@danieljohnson1449 6 лет назад

Hi Eric! Great video. Have you ever replaced the water pump on the element and better yet is there a video?

@ericthecarguy 6 лет назад

No, but it's the only thing I haven't replaced on this engine. Perhaps it will fail next. ;)

@MartinezRE1 6 лет назад

Are you going to do a oil pan replacement video? , all Honda Element have the same problems, it always rusted and corroded

@Jo.mo.jo. 3 года назад

Did the dayco hold up better?

@chisengachintu8427 6 лет назад

tsup Eric nyc work

@eaglevision505 6 лет назад

Not a lot of room to work there! Thanks for showing us how to get creative. Reminds me how spoiled I am with my 1994 Buick LeSabre when I did this job. TONS of room around the engine for the most part. Eric, can you comment at all on the recent story about the young man in the Cincinnati area who was trapped by the third row seat in his 2004 Honda Odyssey? I know you really like Honda products, and you might not have access to your 2001 anymore, but just curious.

@OnlineAutoRepairVideos 6 лет назад

Eagle Vision, I just saw that story this morning..VERY SAD!! He called 911 TWICE!!

@ericthecarguy 6 лет назад

Wait till you see the videos on the Mini I'm working on. www.ericthecarguy.com/blog/2145-april-2018-newsletter As for the story, I just read that this morning. I was trying to wrap my head around it as well. I had the same van if you remember. The only thing I can think of is that it was a freak accident involving the 3rd row seat. I'm thinking somehow he got trapped under it and it locked into position. A horrible way to go, not to mention his poor parents. My 2012 Odyssey has a different rear seat set up than the previous generations. Perhaps they saw the danger and made the correction. My heart goes out to his family. The real failure there was the rescue response. They simply didn't get to him in time. He called twice!

@OnlineAutoRepairVideos 6 лет назад

100% agree with you Eric, TWICE he called. I just can't fathom them actually being there WHILE he was in there trapped. The MINIseries is going to be great, and that was a cool way to use the words, lol!

@MechanicalMikesRoadsideRepair 6 лет назад

Eric, why does the new part need to be well new instead of just replacing the pulley itself or the bearing inside? Also I’ve done my serpentine belt on my car thanks to your videos and an idler pulley. Wasn’t easy on a big v8 but it was easier access but not much wiggle room to route the belt back on towards the bottom of the engine. Only had to remove the battery

@jean-pierredejon5696 2 года назад

Ditto on bearing.

@edwardelkin3098 6 лет назад

I might be a kid but this is really interesting

@youcefcherry3932 6 лет назад

huge thnx from algeria

@ericthecarguy 6 лет назад

Hello Algeria!

@youcefcherry3932 6 лет назад

❤❤❤

@ozzstars_cars 6 лет назад

The job doesn't look to difficult. Nice work Eric.

@numberpirate 6 лет назад

too

@ozzstars_cars 6 лет назад

Oh sorry about the grammatical error Marcus. Yet another RU-vid grammar teacher takes off points from my comment once again.

@SmittySmithsonite 6 лет назад

American, as in a Subaru? 😁 My Silverado was assembled in Oshawa, Canada, with Mexican, Taiwanese, and Chinese parts ... 🤭

@freetibetpls 4 года назад

Can a bad tensioner pulley cause poor idle at stops?

@charliec9720 3 года назад

Question. I pulled my tensioner pulley off and now cannot get the bolt back on. Is there a nut that holds it on?

@carolinadoublej 2 года назад

Yes

@jakesterphillips8904 2 года назад

8:28 - Not sure but sounds like you might have air intake leak. Non OEM intakes periodically Crack. If your using an OEM that may crack too, but be sure to check hose connections too under the intake. Cheers!