How To Replace a Leaking Outside Faucet In 5 Minutes - Garden Faucet / Hose Spigot

Подписаться 68 тыс.

Просмотров 963 тыс.

50% 1

Shark Bite Faucet - amzn.to/2XbFzEY
Copper Pipe Cutter - amzn.to/2AdxWoP
Best Home Refinance HELOC Options - bit.ly/HomeEquityTCM
🏠 Home Owners + Real Estate Investors + AirBNB Hosts
Best Rates On Property Insurance - tcm.steadilypartner.com
Cheap Auto Insurance
🚗 Save Up to 52% on Your Car Insurance - bit.ly/44oEYkb
INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue; Just push to create a watertight seal
COPPER, PEX, CPVC, PE-RT, HDPE: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination
PERFORMANCE: Installing a hose bibb, adapter, connector, spigot, or shutoff, you can rely on a tight union as the pushfit connection bites into the pipe without leaks
QUALITY: Proven quality and performance by professionals, a faucet, brass tee or elbow from SharkBite means you have confidence it will last for years to come
MADE IN THE USA: All SharkBite connectors, faucets, and adapters are manufactured and tested in the USA
Copper Pipe Cutter - Cuts hard and soft copper, aluminum, brass and plastic tubing
Specifically designed for use in restricted spaces on small diameter tubing
Strong, lightweight slide and wheel housing and large knurled feed screw knob provide easy control of cutting pressure for clean cuts
Tubing cutter has a 1/8-inch to 5/8-inch (3 mm to 16 mm) cutting capacity
RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
#LeakingFaucet #Faucet #DIY
How to fix a leaky outdoor water faucet fast and easy
Tags: leaky ,faucet ,outdoor , leaky outdoor water faucet ,how to fix a leaky outdoor water faucet ,troubleshooting outdoor water faucet ,garden hose faucet leak ,leaky garden faucet ,fast and easy outdoor faucet fix ,faucet failure clean ,DIY faucet repair , how to ,garden faucet repair ,outside spigot replacement ,lawn faucet spigot repair replacement ,how to replace faucet in the garden ,leaking faucet replacement ,frozen faucet spigot replacement repair ,faucet ,hose ,spigot ,home repair ,hose bib ,hose bibb ,leak ,outdoor faucet ,fix outdoor faucet ,garden hose ,frost free sillcock ,installation ,fix leaky outdoor spigot ,outside faucet ,pipe ,replace outdoor faucet ,how to replace outside water faucet ,replace outside water faucet ,

Хобби

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 374

@TheCleverMillionaire 4 года назад

Shark Bite Faucet - amzn.to/2XbFzEY Copper Pipe Cutter - amzn.to/2AdxWoP

@silvanoaportela9596 3 года назад

Bad idea. Just swap the insides of the old valve with the new valve parts. Just unscrew the nut on top of the valve. May be tight but soak it with some wd 40. It’s only a rubber washer inside.

@TheEverydayShopperReview 2 года назад

Hey there. Thanks for the video but that shark bite is a nightmare waiting to happen, especially if you are in an area of the country where that spigot will freeze. Please change that properly without the shark bite. That spigot under pressure will test that shark bite and the pressure every time you shut off and turn on the faucet will make it explode off one day.

@ThomasEpps88 3 года назад

There is a 95% chance that the shark bite did not seat all the way on that copper pipe with all the movement in that pipe you definitely would have had to have something on the other side holding that pipe to keep it from pushing back inside the wall while pushing in that sharkbite

@thomasdragosr.841 3 года назад

I was waiting for that pipe to pull back inside the wall when he cut it...

@AZ-zn3ru 3 года назад

I was wondering why he didn’t clamp it from the start. He’s definitely just a DYI-er

@geralddeitz9169 3 года назад

He only had about 1/2" showing and it moved inward more than you'd need to even get a connection. The video went from him barely sending 1/4" in on the pipe to it installed. Didn't show actual installation! Fake

@bristleconepinus2378 2 года назад

I was thinking he might tap a wooden wedge in the penetration to immobilize the pipe while fitting the faucet...and what about some masonry screws into the brick to immobilize the whole thing?

@Popclone 2 года назад

I don’t trust this toy 🧸

@erikfedderly5587 3 года назад

Who was on the inside holding the pipe??? There is no way that shark bite went on without resistance on the pipe.

@n.r.9468 3 года назад

I was thinking the same!

@nickp360 3 года назад

Only in America, oust like these home shows all fake.

@mikebonom 3 года назад

I was going to say the same thing. This video is very misleading and if someone followed what this guy did they'd have water leaking inside their walls.

@jaydrains2247 3 года назад

As seen in the video he had room to move the pipe .. .. move the pipe forward and hold it with a pair of channel locks , then push the shark bite on .. I would definitely seal it to the wall with screws

@robertleong7468 3 года назад

@@jaydrains2247 there is not enough pipe for channel lock and the Sharkbite fitting.

@mark03061956 3 года назад

The way to do that in a cold climate is to heat the valve stem and washer with a torch, twist it off. Clean the pipe end with flux while it's hot, then sweat-solder on a threaded adapter that allows using a silcock that threads into it. Push the pipe with the soldered-on adapter as far back into the brick as it will go and wedge it in, or use foam to fill the gaps and stick it in there. Then thread in a ball-type silcock valve, using teflon tape on the threads. Not quite so pretty as the shark-bite one but so easy to replace if/when the time comes - put an adjustable wrench on the adapter, twist off the damaged silcock, thread in another one. That's a true 5-minute job.

@mark03061956 3 года назад

..meant to say, remove the stem and washer and heat the old valve's body with a torch....

@dustyrhodes6798 3 года назад

Now you need to do a video on replacing the shark bite faucet.

@countrifiedjose7537 3 года назад

If you are going to use a sharkbite fitting, get the deburring tool. It cleans up the sharp edges of the cut so you don't damage the o-ring and also it let's you know where to mark your pipe so you know if the pipe is all the way in the valve/fitting. Clean up the inside of the pipe also so there are no sharp ends.

@geralddeitz9169 3 года назад

And wrap pipe with teflon tape before installing faucet

@michelleayres5608 2 года назад

You're so kind to help homeowners like this.❤

@slimeecksdee8916 3 года назад

You are a life saver my guy thanks much love

@omarcarrillos2727 3 года назад

Thank you Casper for holding that pipe inside the walls.

@TheCleverMillionaire 3 года назад

😂😂😂

@keithruffner7168 3 года назад

I mean do you need him to tell you that? If so dont even attempt it lol

@ericmick6679 3 года назад

One you should have put silicone in hole and around faucet cover to keep bugs out. And I would have sealed the inside where it comes trough in basement. Tks

@joebalfe8540 3 года назад

That white plastic circle on a shark bite is only needed if you use it on plastic pipe. It's helps keep the plastic pex pipe from deforming. When using a shark bit on copper pipe always remove that white pice of plastic. It will mess you up every time buy Catching on the inside of the cooper pipe. I am a master plumber and have used over a thousand shark bites. This is what makes a shark bit fail time and time again.

@icqtrinity 2 года назад

Very helpful, thank you.👍

@williamgates4399 2 года назад

I have used SharkBites in my bathrooms, and kitchen. Never seen one for outdoor faucets. Thanks.

@pn3940 3 года назад

that new faucet just got pushed in and it held tight? what force is holding them together?

@maxipaw-dc5xj 4 года назад

This wouldn't work 99% of the time most faucets don't have that much slack

@dans4270 3 года назад

It also puts unnecessary strain on all the joint inside lol

@sathyanarayanalingiah6915 4 года назад

he could have just changed the rubber washer

@ericks4280 3 года назад

by the time they leak, they are so corroded its very hard to get the stupid thing off anyway

@She_Tried_It 3 года назад

Right... and come back and repair and bubble gum it every year until he wises up and replaces the whole thing. Or if you called a plumber, you can pay $75-80 per trip for them to keep coming out putting on rubbers...

@oldman3440 3 года назад

BINGO!

@IKILLBUSTERS 3 года назад

@@She_Tried_It plumbers are crooks but some home owners are lazy.

@MushookieMan 4 года назад

You'll definitely want those screws in place, or every time you turn it, it will strain the shark bite connection.

@TheCleverMillionaire 4 года назад

I added them after the video, your absolutely right

@derekholmes7751 4 года назад

I assume you would need some type of concrete/masonry screws that tap into the brick? If so, can you recommend some please? Thanks!

@ZiegmundEztli 3 года назад

@@derekholmes7751 Tapcons. Dewalt is a pretty good brand for them.

@truthseeker3715 3 года назад

Wish someone would do one on the shut off valve.

@jeremyfowler1519 3 года назад

Yep

@ravikarashiravanthe7759 3 года назад

This can be done. You have to cut the piping inside the house with enough space to work with. Then insert the SharkBite hose bib with more than enough PEX piping attached to it. Complete the connection inside the house. I have done it with ease.

@watchingyourvideo8029 3 года назад

Crypto AND plumbing? You’re a wizard.

@snankoo4055 3 года назад

Thanks Brother Highly Appreciated .God Bless.U.

@dans4270 3 года назад

Well at least we all know how NOT to do it 🤦🏿‍♂️

@christiandebellefeuille3245 3 года назад

thanks god, you just confirmed my assumption. I know nothing about plumbing but i was "Ewwww! It doesn't look that good! One winter and this installation will break and i'll end up with more problems!". I think i'll stick to other video showing the proper way, with an Anti-Freeze Wall faucet which is long enough to get inside the house. Problably not as cheap as this crap, but still more bullet proof than this. I'm not the kind of guy who like to change this crap every year.

@NicoNico-ts2np 3 года назад

@@christiandebellefeuille3245 I live in Florida so this “freeze” faucet works for me, see you suckers🤪

@raulgutierrez5920 4 года назад

!Cut the pipe with the grinder you leave more space to put regular hose bibb on and use you torch!!!🤔🧠👍

@CCW-wg8ds 3 года назад

How do you get a grinder behind the spigot. Acctually a hacksaw with a new blade. Will get closer. Also put a visegrip on the pipe next to the wall. That way the pipe will not go back into the wall. ,

@anthonysaintpaul652 3 года назад

You just made your life miserable the next time you have an issue with that shark bite, which appears to be recessed into the base of that spigot. It will not be easy to remove this shark bite spigot/combo unless you cut the pipe again! Why not sweat the spigot off (no cutting) and solder a male threaded adapter to the pipe and use a threaded female spigot. The next time you feel you want to replace it, you can just unscrew it with two wrenches. Life would then be so much easier for you and the next person who buys the house. It would be a win win! Do it right!

@FPChris 3 года назад

Are shark bites rated for Winter subzero climate? Will the plastic crack over Winter when you turn it on in the Spring?

@milehigh3054 3 года назад

That will definitely crack in cold weather

@_mikishi_ 3 года назад

If the new one leaks, is it easy to get if off now?

@mikehod 3 года назад

Thank you! Just did my faucet myself (and I'm not handy! lol), your video saved a bunch of moolah!!

@TheCleverMillionaire 3 года назад

Glad it helped!

@robertsteinmetz4084 2 года назад

If you look at other video's, it is stated that you should not use sand paper, the pipe needs to be clean, but not have the striations on the copper pipe.

@HahuTechDC 4 года назад

Thanks, bro, really very easy i was looking for it you make easy thanks again

@TheCleverMillionaire 4 года назад

Glad it helped

@daniloespiritu6072 Год назад

Thank you

@lysa7211 2 года назад

Thanks a lot 🙏

@adobo1976 3 года назад

While it's wonderful that your faucet's pipe is protruding from the wall so that you can easily do this; most are flush with the wall. I don't see how this could easily work in most situations.

@vsar1938 2 года назад

In this case i would of gone with soldering since that would allow you to keep the extra length in the pipe, would of also insulated the hole. And as others have said there is no way that sharkbite went on without you being able to hold the other end of the pipe. Hopefully this video doesn't mislead too many people.

@jameskeeler6321 2 года назад

LUCKY! Good thing that pipe didn't disappear in the wall.

@ThuyLe-ti1lb 3 года назад

Thanks

@michaelholliday100 3 года назад

This is definitely a Southern State without frost issues. I live in Ohio and that faucet would freeze and pop the pipes the first winter...

@noodlegawd 3 года назад

If you have to pull the pipe out of the wall a bit to get a long enough piece to to work with, how do you keep it from just pushing back in when you try to attach the new faucet? Is there some kind of flat clamp you can attach to the pipe to keep it in place? I guess you could use locking pliers, but they might be too thick.

@skaizun 2 года назад

Get someone to hold/push the pipe from the inside. In my case, both the front and back faucets of my 60+ year old house are accessible from the inside via the kitchen sink (back yard) and a clever "door" over a hole in the drywall inside the main entrance closet (front yard). If I were to do it, myself, I'd attach a clamp or vice-grip wrench or bolster the pipe with a piece of wood against a wall, stud, or other pipe (put a cotton towel around the pipe to protect it from the clamp/wrench). In some cases, the only access may be through the inside pipes in your basement or crawlspace.

@jnap0210 3 года назад

What size screw do u use to fasten it?

@brucebeamon5460 3 года назад

I’d rather just change the washer , which I did do this summer , and it works beautifully now on one of my outdoor faucets ... the other one , I couldn’t get the screw of the handle even after spraying it with liquid wrench ( but it doesn’t leak until I turn it on ) when it’s off no leaking , so for now just leaving it until I figure another way to get that screw off that faucet handle

@thegagdotcom7849 2 года назад

awesome dude..thank you so much

@CSsuckDk 2 года назад

thank you so much!

@billbaber6653 7 месяцев назад

Good show

@ojaihandydan Год назад

I've used shark bite many times but don't see how the stem was long enough to pop in. But if it did, and it's a non freeze environment, that would work. But I'd definitely fill in the gaps with foam and secure with blue screws

@auntiesocial808 4 года назад

Thank you! I'll let you know how it goes!

@TheCleverMillionaire 4 года назад

no problem :)

@AlonzoLivin 3 года назад

How’d it go?!

@ThePestilentDefiler 3 года назад

How did it fucking gooo!?!

@timothysandridge7365 3 года назад

How did it go? Wtf

@rexvisitor44 3 года назад

Easy. He can’t afford internet access on account of what he owes the plumber.

@veggiepowered 2 года назад

I'am Your Newest Subscriber Great Videos

@gregdomanski4371 2 года назад

You sound great ,Most outdoor hose bibs do not have that much copper sticking out your brick ,block or concrete wall ,Most existing hose bibs are installed

@solargod3671 Год назад

Good job

@RD-wy5dj 4 года назад

Thanks for the video!

@TheCleverMillionaire 3 года назад

You're welcome!

@Sergio-ih6lk 3 года назад

thanks for the tip just saying

@dsantostv3711 Год назад

It’s that good for nyc weather?

@appleztooranges 4 года назад

How did the pipe not move back, when you brought the shark bite faucet pushed in? Looks like it’ll just push inside. Also, how far of a pipe do you need there protruding from wall

@raulgutierrez5920 4 года назад

!!He don't know "shit" about pluming!!😂😂😂

@BenLandersMedia 4 года назад

I was thinking the same thing - you should get some vice grips or a clamp and attach it to the pipe so you could press the shark bite on

@Rot05 Год назад

I highly suggest installing a hose Bibb anchor on the other side of the wall. Also someone needs to hold the pipe inside when you push this on or install it in a new piece of pipe and then join the new pipe inside with a coupler.

@QNA47 3 года назад

Very useful video. Great presentation. Thanks

@TheCleverMillionaire 3 года назад

Glad it was helpful!

@CaptainTee 3 года назад

You need to replace it with a 4 in. Lead Free Anti-Siphon Frost Free Hydrant with Built-In Vacuum Breaker. Real plumbers don't use sharkbite.

@bigmacdaddy1234 3 года назад

Um, yes they do.

@aaronbaraiya3692 2 года назад

@@bigmacdaddy1234 yep, I have seen many plumbers use shark bites for the job

@timothyphonepeterson4331 2 года назад

God bless!!!

@gjurczyc 2 года назад

Great video, except you need to remove the white plastic piece when connecting to copper. Leave it it is was PEX.

@SteelRhinoXpress 4 года назад

some videos show you how to twist off the valve stem and replace the whole thing, but i think that is stupid. 1. you don't know how old those pipes are and that stem connection could be seized up to the connecting water pipe. 2 many modern homes have cpvc water pipes and you can just imagine what would happen if you tried twisting the stem off.

@td.2840 3 года назад

So helpful!

@milehigh3054 3 года назад

Hope it doesn't freeze wherever you are from.

@CCW-wg8ds 3 года назад

Hint put a vise grip on the pipe so you don't lose it in the wall.

@kvital5353 3 года назад

That’s what I was thinking as well, he popped the old faucet off and the pipe could have went into the wall and their goes a even bigger problem

@jdubdoubleu 3 года назад

He did lose it. That's why he edited it

@theamericanhiker9655 3 года назад

Don’t do this shark bites have o rings and leak easier when moved. Call a plumber snd do it the right way.

@davidgill2268 3 года назад

No way the shark bite went on without the pipe being pushed out further from the wall , You either had someone behind the wall pushing the pipe or pulled the pipe out 4 or 5 inches and used visegrips to hold the pipe before pushing it on

@_1ben 2 года назад

if for some unforeseen reason you can not get a full shut off , stab the shark bite valve open the valve fully this will help with the installation with little resistance , second i would use a hack saw instead of the cutter as it will give you more pipe to stab your shark bite fitting, and third give a try to unscrew the old fitting using a back up or another wrench or tool to hold the pipe still so it will not turn or bust as you try to unscrew the old valve this is very important, bigger wrenches give better leverage , be careful , thank you for sharing your video

@cdb989 3 года назад

To me that’s cutting corners. Do the job right the first time. Shark bite really, you want to trust that. Not for me I’ll stick to the old way.

@TheCleverMillionaire 3 года назад

it has a 15 to 20 year life expectancy, I trust them :)

@joeypenkal376 3 года назад

Build Your World expectancy* you have plastic teeth holding onto your copper pipes

@vincevesper167 3 года назад

Can you show us to remove the new bib?

@losira13 3 года назад

I don't have a copper pipe but I just have that darn gray plastic pipe. I really need to replace both of my outside faucets and I live in VA along the coast. Is a Shark Bite faucet the best thing to use or not? Any comments would be helpful! Thanks!

@bleh8310 3 года назад

So multiple hose bibs and in an area that gets below freezing temps? I would call a plumber. If not to do the work for you and save potentially thousands in damage, then the plumber can still listen to your eventual DIY plan and ensure you aren't doing anything wild. Just my 2¢

@cityguyusa 3 года назад

You're replacing an entire valve for a 10 cent washer?

@onlywenilaugh6589 2 года назад

That insert in the bite effectively reduces the inside diameter of the pipe and you have less volume of water out the spigot.

@robertbutts7352 3 года назад

What happens when you want to replace it for another new one?

@geralddeitz9169 3 года назад

It pulls off I have a couple under my sink but one started leaking last year.

@mikejones5364 3 года назад

It will leak, The white insert isn't made for copper. It for soft type pipe like PEX only.

@TheUmbralFox 3 года назад

Thanks! Very helpful

@ericthomas7474 3 года назад

Would only need to replace pipe if broke. Have access from basement usually. Shark bites aren't always ideal.

@richardsparks9904 2 года назад

No basement access in slab built homes

@rom207 3 года назад

Those also won’t work in most states that get below freezing.

@smhaack63 3 года назад

I'd love to hear how effortlessly pushing the faucet onto the copper pipe magically creates a seal that withstands typical water pressure. Not saying it doesnt - but if it went on easy seems it should come off easy. How does that work?

@AG-tm4gr 2 года назад

It's called a sharkbite. It's been around for some time now. A quick Google search will have more info for you

@OneAdam12Adam 2 года назад

@@AG-tm4gr It's a crap product. Your insurance will drop you off you have any water damage from it

@bxq3843 Год назад

What is the part type or name for exchange? Thanks!

@timavery7984 3 года назад

Do not trust a “plumber” in flip -flops.

@sixpackyoung9698 3 года назад

If Tim Avery say one more thing, Clever will wear pink flip flops on the next video.

@timavery7984 3 года назад

@@sixpackyoung9698 as Steve Martin once said - “ well excuuuuuuuse me !!”

@mattbundy4900 3 года назад

Plumbers don't use shark bites... Ever.. May be as a temporary fix, but never ever permanent

@avsiii7661 3 года назад

It would be a lot easier to just replace the washer - Also do not use those so call shark-bite BS devices. If you live in area that freezes, the shark-bite faucet will come loose and you'll have a major problem. You'll find out in the future.

@tickley42 2 года назад

Thank you! Looking to replace a couple that froze this winter and found a dozen shark bite tutorials. None of them look like long term solutions.

@martell203 3 года назад

How long should the pipe be?

@65csx83 3 года назад

It appears the shut off for the outside spigot had a worse leak than the spigot. That was quite a steady flow draining out.

@whydoineedtohaveacct 3 года назад

Yup but that's a separate issue lol, also a good reason to use shark bites in his case!

@TheOne610 2 года назад

It's probably the rest of the water draining from what is sitting in the rest of the plumbing lines (line leading to the bathroom etc,) they are all interconnected.

@Oppositesleeper 2 года назад

And then what do you do when that one starts inevitably leaking? Shark bites are great when you can release them.

@geralddeitz9169 3 года назад

What I see is a copper pipe that will push back into the house. You would need to hold the pipe for that type of connector to be pushed on tightly. Why didn't you show how you held the pipe while installing the fitting? You went from it sticking out if 1/2" to it instalked. Either you has someone under the house pushing out on the pipe or using a tool to hold it on the outside. I don't see it going on from your video with how much it moved inward! Please explain and show in a video. Just my 3 cents

@ronwass 3 года назад

Also, you didn't show the actual shark biting. Just when you started to push it on. How did you get the pipe to stop from pushing into the wall?

@CCW-wg8ds 3 года назад

Hint put a vise grip on the pipe as close to the wall as possible. So the pipe doesn't go back into the wall .

@onetruesoldiervt3686 3 года назад

This whole video a bunch of bullshit

@iketheranter9126 3 года назад

Mine doesn't stick out that far with exposed piping. It's mounted flush.

@jasongardner4870 3 года назад

Yours might unscrew?

@EJ42955 4 года назад

Didn't see you turn the main valve back on. So... TIP: After you open the valve, all the way, turn the knob back in a quarter turn, This will allow you to twist the knob back and forth, in the event the valve gets stuck from hard water deposits.

@TheCleverMillionaire 3 года назад

had my brother do it didn't get a chance to recored it, thanks for the tip

@annaibarra3447 3 года назад

Wish I knew more in detail, what you mean. I hired someone to do it and still leaking. He was a plumber/handyman, if it was so easy then why couldn’t he do it right? 😖

@skaizun 2 года назад

Sometimes, it depends on the quality of the faucet. Shark Bite products are, usually, very good, but, improper manufacture or plumber/handyman installment may have damaged the interior "ball" valve (hopefully, it isn't leaking inside your home!). As an example, I attached splitters (allows two hoses to be attached to the one faucet) on my outside faucets at two different times. A cheap, plastic, one, worked great one summer, and failed the next (the plastic ball valve must have broken during the winter), while an expensive bronze ball valve hasn't failed in years. However, water pressure is surprisingly strong, and may force its way through even the best-made faucet valves, in which case, a professional plumber may be your only hope (est. $200).

@princedemetri 2 года назад

I would say this is a good solution for a DIYer but I’m not sure how reliable this would be for professional work. I would suggest putting that in the description somewhere

@grahamworksconstruction 3 года назад

Shark Bite directions say no sanding, de burring is a must.

@charlesc2281 3 года назад

You can also just rebuild the old one without having to take it off.

@GardenDownSouth 3 года назад

dude, real nice, well explained video. thank you!

@timavery7984 3 года назад

Soldered ...not “welded “

@Marian.Pristupa 2 года назад

All the real plumbers that watched this video just cringed to the absolute max when he said a shark bite fitting 😂🤦🏻‍♂️

@januszpawlus7302 2 года назад

I would like to see what happened when you turned the indoor valve back on!? There will be water spraying around your shark bite because of weak bite.

@donnbialik9085 3 года назад

1. Most situations will not have that much slack in the line. 2. Someone needs to support the pipe from the inside. 3. You didn't sand to bare copper far enough back for shark bite fittings.

@MoonBags 4 года назад

i love shark bites makes the job so easy

@SarahPalinQuit 4 года назад

Curious editing at the end tho

@TheCleverMillionaire 4 года назад

Yea ended up dropping phone so i had to edit it out

@geralddeitz9169 3 года назад

He didn't even show the installation. He was just advertising for the product

@SomeDumUsrName 3 года назад

Yeah, he had to cut it and not show how the pipe pushed back into the wall when he tried to push it on there and then DAMN sure didn't want to show the next half hour it took him to figure it out. lol

@trustone8540 3 года назад

Yyeeeeeeerrrrrrrrrrrrrr

@1960tpk 3 года назад

Good luck when its time to change this one

@TheCleverMillionaire 3 года назад

hopefully it won't be for another 10 to 20 years :)

@weihe1427 3 года назад

He cant remove it at all.

@Stuart68505 2 года назад

Maybe he should have installed a long stem valve that would prevent it from freezing as well as having a built in back flow preventer.

@zehuazhou3390 3 года назад

This can't be anti-freeze right?

@ravikarashiravanthe7759 3 года назад

I have used SharkBite fittings. It is not as easy as it appears for copper pipes. More over it needs some force to pop it in. That means somebody real strong must be holding it so tight this guy can pop it in. No way. I like SharkBite and it is easy to use with PEX piping and little room to work with.

@Hauwienguyen 3 года назад

Now how do you remove it

@Pitbulls_and_Plumbing 2 года назад

uhh..there was to much movement on the copper..how did you put pressure on the copper so it didnt go back into the wall wen u pushed on the sharkbite?