How to Replace a Motor Mount or Transmission Mount

Подписаться 10 млн

Просмотров 466 тыс.

50% 1

Learn the main methods for replacing a bad motor mount or bad transmission mount. This will show you how easy of a job changing a motor mount is and all the little tips and tricks!
Where to buy inexpensive motor mounts: www.amazon.com/s/?_encoding=UT...
How to Diagnose a Bad Motor Mount: • How to diagnose a bad ...
How to Replace a Different Motor Mount: • How to replace a Motor...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ru-vid.com_c...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Авто/Мото

Опубликовано:

7 дек 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 354

@hc2cox Год назад

What really amazing about your videos is camera angles! 8 yrs video still conveys the knowledge well! Kudos!

@chrisfix Год назад

Thanks a lot!

@TheDro 5 лет назад

I already knew how to do this but i still watched it all the way through. I love listening to how you explain stuff on your channel!

@chrisfix 5 лет назад

Thanks a lot

@TheDro 5 лет назад

@@chrisfix ive been restoring an old '77 RV with a v8 440 and 727 tranny. Your channel has helped me save a ton of money and im learning how all this works in the process. Its been fun! Would love to see some other videos on transmission repairs, i plan on checking and possibly rebuilding mine soon.

@chrisfix 5 лет назад

Transmission video is next!

@rocktidwell898 5 лет назад

ChrisFix can you do a rack and pinion video ?

@TheDro 5 лет назад

@@rocktidwell898 i did a rack and pinion job on a dropped 91 acura integra and it was a nightmare to get it aligned. Make sure you have a way to tow the car to an alignment shop after the change. You can mark everything too but i dont think it ends up coming out perfect. It was probably one of the harder jobs i had to do on a vehicle so far but i was also just learning then. Im sure a true mechanic wouldn't have had as many issues knowing work arounds from experience. Id love to see a chris fix video on that too

@theMANdrew 9 лет назад

the core support can be a beefy piece of metal though it usually isn't. windstars have a pretty solid subframe that's heavy duty and welded. other cars have bolt on core supports or welded supports that do not have much structural integrity. as for jacking up the motor, you can usually get away with a 2x4 cut off under the oil pan if you gingerly jack it up and make sure the motor is moving independently from the chassis. jacking from a small area on the engine block increases the odds of causing damage to external motor components and injury due to less surface area making contact. i learned that the hard way when i was a newbie. i would stay away from jacking from mating surfaces because that has a higher chance of causing a leak. i just wanted share my insight. with that said, i like what you're doing and i like to see people maintaining their vehicles. knowledge is a great thing to share.

@chrisfix 9 лет назад

Thanks for sharing your insight. I would never jack up your motor from the oil pan, but I know people do. I appreciate your tips!

@ScubaCat3 9 лет назад

ChrisFix The Ford Workshop manual actually specifically says to jack up on the transmission pan with a block of wood for the trans mount on the other side. For the mount you're working on here, though, it says to lift from the top (as if anyone's really going to do that for a motor mount). I just thought someone might find that little nugget interesting. Thanks again for the video!

@superbabaganoosh 7 лет назад

Dude I love how detailed your videos are!!!

@abdulabbas3726 7 лет назад

Dear Mr. Chris Fix, Thanks a lot for your video. Really it was useful, clear, Sam up.Not only this video but all your videos are full of information and useful. Would you mind, if you could explain the symptoms of the problem at the beginning of your video and then start the resolve of it. I Will be grateful. Best regards.

@redact207 9 лет назад

Your videos are getting better and better, thanks for putting in the effort

@chrisfix 9 лет назад

redact207 Thanks a lot man! I am glad you are learning a lot and they are helpful!

@RamonLFrancisco 6 лет назад

Nice video...tough to get a camera up in tight places and focus in but you made it clear to see what you were doing. Thanks!

@bryanbenedetti2579 8 лет назад

Great video! I love the clear camera shots and the editing!

@chrisfix 8 лет назад

+Bryan Benedetti Thanks a lot!

@benjaminbrown9677 2 года назад

Great job

@rosahairsalon 5 лет назад

Chris ur a genius

@chrisfix 5 лет назад

Thanks!

@southernautodiy2643 3 года назад

Well yeah! He's a honest mechanic that knows what he's doing

@Missqueen57 4 года назад

I rarely post positive comments but I loved your style of video....you didn't gab endlessly about irrelevant nonsense...you got to the point and were descriptive. Loved your video! Thanks!

@ixionn563 5 лет назад

Just bought new mounts for my '05 Ram 1500 and I can't wait to install them, thanks!

@Noreladim 8 лет назад

Great video Chris. I recently bought a 1995 Roadtrek class-B RV with 144,000 miles (on Chevy G30 van chassis). Took it in to the dealer for new tires and was told it needed to have the motor mounts replaced. Now I know what they are and what's involved in replacing them.

@chrisfix 8 лет назад

+Daniel Noreladim No problem! Congrats on the new car!

@richard2428 7 лет назад

I learned alot from you dude good shit

@ohaneson 8 лет назад

Chris, I really enjoy your videos! They've been very helpful. This particular video helped me save my brother around $300 by changing the rear motor mount on his 1998 Ford Windstar ourselves. However, I wanted to let you know that the torque specs of 85 ft pounds you claim in the video was too high for the top bolt on for us. Unfortunately, we broke the bolt when trying to tighten it to 85 ft. lbs. Afterwards I looked in the Haynes manual and it says that the top bolt should be 50-68 and the bottom should be 65-87 ft. lbs. We were successful on the second install. Just wanted you to know so you could add an annotation in the video (at 9:07 and 9:31) in order to help others keep from making the same mistake. Thanks again, and keep up the great work!

@chrisfix 8 лет назад

+ohaneson thanks and great work!

@mohdacir8192 9 лет назад

Thanks a lot Chris... was waiting for your version of this...

@randywright1809 4 года назад

Love your videos!! With your videos, I have saved a ton of money. I wish you had done the transmission mount on your B3000. When I try to find info online, it only gives details on the Ford Ranger. I am guessing the procedure is pretty much the same. But it really goes along way when your videos are specific to your Mazda

@moneygeewtee 9 лет назад

Not sure how you were able to film such a tight clear shot as the engine was being lowered over the motor mount stud...great video!! Nice job Chris! Take care.

@chrisfix 9 лет назад

moneygeewtee Thanks man! This comment made me happy because it was so tight that I thought my filming was not as good as it usually is. I had to really contort my hand and I couldnt use a tripod! Thanks again for the feedback!

@sanjyotipatil6499 5 лет назад

@@chrisfix hey Chris before you was publishing 2 videos a week but now you publish about 1 video a month pls upload atleast 1 video per week

@trevorjones3755 7 лет назад

The motor mount was the start of the long downhill of my mom's 2006 honda oddessy as the ac, then the battery, then the starter. I wish I saw this first!

@georgedeleon942 5 лет назад

Hi Buddy i dont worries about my truck coz Chris fix is here i learned more about ur tutorial. Just keep it up a good work Buddy while u doin' right for u i' ll give u a double THUMBS UP. Thank u and God Bless you as a Vlogger.

@un-_-known688 5 лет назад

This might well come in hand I will find out tomorrow thank you Chris

@Xanthopteryx 5 лет назад

Safety first! Good that you take that part serious.

@ephraimcamacho8015 7 лет назад

hi Chris. it's be a while since I have seen some of your videos. But I always said it you make the best videos! thanks again!

@losxlakers 9 лет назад

Chris, those tips are great! Lol. I don't know how you come up with so many. You have a couple up your sleeve and they are very useful.

@chrisfix 9 лет назад

Los Lakers Thanks bud! I dont know how I come up with so many either. I just kinda talk and it happens haha.

@LaodiceaMythos 9 лет назад

Your good camera work is much appreciated.

@chrisfix 9 лет назад

LaodiceaMythos Thanks! I am glad the video was helpful and the camera angles are good!

@patriklabic8467 Год назад

Chris, i love to see you nice progress:). If i compare old videos and actuall, nice job, you help me a lot and save me a ton of money.:) Greetings from Europe:)

@hanknmosul 5 лет назад

Any aviation background, Chris? Your suggestion at the end of the video to mark the nut to detect movement of the nut after installation is reminiscent of the slippage marks used for helicopter/fixed wing repairs. We use commercially-available slippage mark paint, comes in a little tube w/ different colors avail. Just curious. Great videos.

@aleblanc3547 9 лет назад

You made that look easy (as usual)! That top tip is just brilliant. Thanks, Chris.

@chrisfix 9 лет назад

A LeBlanc Thanks bud! It was pretty easy. Just two bolts lift the engine and boom! The hardest part is knowing what to do. If you know how to lift the engine (which I teach you) then you are golden! I am glad you like the top tip. My truck is marked all over the place lol.

@wholeNwon 3 года назад

2 of 3 mounts in my car are easy to do. # 3 is a real bear. Tech couldn't do it either. Had to call shop owner who was really slick in assembling swivels, extensions and an adapter to access the mount bracket. Made it look simple.

@cooljt4life 9 лет назад

Would not of thought of the marker tip, thanks! Love the tips of the day part of your videos :)

@chrisfix 9 лет назад

cooljt4life Thanks man! Yea, it is such a simple little tip but really helps with peace of mind and tracking those pesky nuts and bolts! It also helps because when you have a lot of bolts, after you torque one down, you mark it so you know you already torqued it!

@moebiusfan9545 9 лет назад

Another quality video! Nice shots in those tight spaces, too. One thing this video reminded me to ask you is to consider a tip about when to use thread lock (and which kind) vs anti-seize.

@chrisfix 9 лет назад

James Coley Thanks man! Yea, those tight spaces were tough to get into! I will definitely be making that video and really appreciate the idea (so dont worry).

@tb_and_j 9 лет назад

Awesome video once again. The top tip was a good one, I never would have thought of that!

@chrisfix 9 лет назад

Thomas Brendel Thanks Thomas! I liked the top tip on this one too haha. People always ask how to tell if a bolt or a nut is going to come undone so I figured this would be a great opportunity!

@itsme2369 9 лет назад

Dude your videos are very detailed, nice keep up the good work.

@chrisfix 9 лет назад

itsme2369 Thanks a lot man! I am glad you are enjoying them and hopefully learning from them!

@lggoss58man15 Год назад

Thanks Chris you saved my life

@labradormcgraw 4 года назад

You just can't beat a ChrisFix video.

@RobertThomassilenticon 6 лет назад

Great video man, subbed!!!

@ohmramm 9 лет назад

hey man, good video! really detailed! thanks.

@chrisfix 9 лет назад

***** Thanks Carlos!

@Viggggggr 9 лет назад

Nice video even tho i dont need to change them I wached the hole video just because you have a great way of teaching. Just like every video you made.

@chrisfix 9 лет назад

Pie 4life Thanks a lot! I am glad you watched the whole video and learned something new! That is awesome!

@dibasser 5 лет назад

What can you say about DEA Products ?? Is it good? I want to buy motor mount from Westar....

@JonahLongworth 8 лет назад

does the 2002 ford taurus sel have the same looking motor mount as the van you used in the video because my mom's motor mount is bad and I want to know If it looks the same

@travelerintraining3353 6 лет назад

Hey Chris.. long shot but I'm desperate here. I'm trying to fix my motor mount (front passenger - the one you don't fix). The previous owner must have not bolted the bolts in correctly because after I hit a pot hole they seem to be missing. Is there anyway you have some idea of the size of threads that these bolts are?

@btd2516 4 года назад

Chris, where did you get your torque specs? I just did the mounts on my daughters 2001 Windstar and I have the Ford shop manual and it list 69ft lbs for the top nut, and 56ft lb for the bottom nut. This is for the 3.8 engine. Did it just as you showed, new mount was a little taller than the old, but finally got it turned just right and it slipped right in. Thanks for the help!

@jazminegardner918 2 года назад

Hello Chris! I have a question a guy at Precision Tune put both of my motor mounts on my GMC Yukon 2009 SLT and the engine light is still on he removed my tires to put each of them on he said that he didn't leave the seal on there so it would seal so I'm trying to figure out why my engine light is still on is it anyway you can tell me how to do and what to do or where I can take it here in North Carolina

@squeek797 7 лет назад

do you know if the motor mount is in the same location on a 05 freestar? i have to do a water pump change today.

@paulhomsy2751 5 лет назад

Excellent instructional video. Very clear, to the point and good quality video !

@gabrielrodriguez8019 7 лет назад

man u make it look so easy, great job

@chrisfix 7 лет назад

Thanks!

@princeboateng694 3 года назад

Replaced my radiator a few weeks ago on a 2004 lancer es and noticed my transmission mount was completely shot. It was the easier replacement ever! Take off the bolt that holds the transmission and get under the car used my impact wrench for three bolts of a frame holding the mount. Unbolt the motor mount and install the new one. 5-8min job. Gotta love old cars

@peterassias4809 9 лет назад

Another great video... thanks for the info!!

@chrisfix 9 лет назад

Thanks Peter! Glad the video was helpful.

@hermand 9 лет назад

Really pro vid, Chris. Also loved that you end up with ruined gloves at the end - mine never seem to last many minutes and I end up with a really dirty thumb!

@chrisfix 9 лет назад

hermand Thanks man! That was the third set. I should do a behind the scenes of filming video haha. I go through a box of 100 in a month lol.

@abdalqadr1 3 года назад

Smart man thanks for you from Iraq

@bobbybrown9711 2 месяца назад

Very helpful !!!

@ghettoviking5278 6 лет назад

can you do a similar video for a 01 buick Park Ave base but include the transmission mounts also?

@erakkar7471 4 года назад

5:40 was waiting the whole time for him to say that hahaha. I know I’m immature.

@CarlosGutierrez-uu8pm 8 лет назад

hi chris. can you upload video on How to Replace a Motor Moun frontal of the Ford Windstar 96

@pascalhogstrom2203 5 лет назад

You are a bad role model for me. =) found your vids like 1 week ago. Spammed them and bought alot new stuff =) great vids.

@CaboWabotv 9 лет назад

Chris I have a 2002 Mazda Tribute. The mechanic at a Mazda dealer showed me that I have a bad motor mount. Looks exactly like yours. I think they call it the 3rd mount. Mine is compressed and leaked out the fluid inside it. They quoted $400 to replace it, but I declined service. The mechanic said he would just tighten it down as much as possible so it doesn't shake the engine. Is that ok for the time being? Not sure how long I'll keep this car. The engine runs fine and it doesn't shake or move a lot like yours was doing. Should I lose sleep over it?

@sabrom 3 года назад

Did you have to loosen the front motor mount also to raise the motor up high enough to get rear motor mount out?

@wcd46 9 лет назад

Good Tips Chris I like your style very informative. Keep em coming. Any ideas on how to fix a turning squeal on a 1997 960 Volvo?

@chrisfix 9 лет назад

Willy Dittmar so something squeals when you turn? Is it the wheel bearing?

@mahlerob 7 лет назад

Great video Chris. I couldn't help but notice though the difference at 1:04 and 9:43. It looks like the mount isn't quite seated at 9:43. Won't that put a lot of stress on the bottom stud? I was watching because I am about to change mine. Thanks so much for the great videos.

@mahlerob 7 лет назад

I meant 1:09.

@orficaldari3524 6 лет назад

I knoq this is from 8 months ago but if you look very closely that dark part isnt a gap its just really dark

@MindRightLifeRight 9 лет назад

I NEED YOUR HELP. I have an 08 Cadillac Cts. I have the same problem with the shifting from R to D or vise versa. But it doesn't happen from neutral and back to the same gear. it started like 20k miles Ago and I've gone to the dealer multiple times. They installed new motor mounts, it didn't help and seems to have gotten worse. I hate braking in my car because it thuds every time it shifts down gears 1-3. Letting off the gas and pressing it shorty also makes a thud and I get a small "clutch-slip-like" roll instead of a rev up and then the smooth sync . It is an automatic

@thatdudemoe9109 5 лет назад

@chrisfix could you do a video on the ford ranger specifically?

@edgardoamado7008 9 лет назад

Can u do a video on tire chains for snow and ice? I was recently looking into it and got really lost. I have even seen some disposable zip ties for snow traction. Will putting anything in my tires damage any components in my suspension??? Love ur videos

@chrisfix 9 лет назад

Edgardo Amado Thanks man! I probably wont be able to do a video on snow chains because I dont run them. They can help, but if they come loose, they can cause a lot of damage so be careful. What car and why do you need snow chains (Im curious)

@patriotsfan7342 7 лет назад

Is it the same for the front?

@wildbillcarroll 9 лет назад

Your video's are the best, very easy to understand you stay on point love it!! I have a 986 Boxster it needs some suspension work do you ever work on Boxsters? Thanks keep up the good work.

@chrisfix 9 лет назад

william carroll Thanks a lot man! I havent worked on any boxsters yet. German cars like to use different tools so instead of normal bolt heads they have hex heads. Otherwise, it is all the same stuff! Good luck fixing up your boxsters suspension.

@rafaelramos2731 5 лет назад

Is it better to use original parts for motor mounts or go with replacements?

@gustavomijares5128 11 месяцев назад

Need to replaced my 99 ford contour automatic transmission mount. Any videos available?

@justinthomas3720 Год назад

I need helping seeing what motor and trans mounts I should buy they look different and I’m getting different results it’s for 2005 cobalt ss (manual…)

@anthonyluciano7450 4 года назад

Chris, you put a Link on inexpensive mounts. Do you recommend cheap aftermarket mounts or oem? I feel like when parts are inexpensive the quality is not good and they dont last as long.

@mm7305515mm 8 лет назад

i liked the idea of marking the position of the nut at the end genius bro

@chrisfix 8 лет назад

+mohd raw Thanks! Glad you liked that tip!

@Hygoog 4 года назад

Is it safe to use a impact wrench to loosen the nut? Thanks

@supermega200 8 лет назад

How much would you charge to change my shocks I live in New Jersey.you can make a video if you'd like I don't mind

@mrbreezeet1 2 года назад

01 Pontiac Grand Prix. What is a decent motor mount that won't break the bank? Everybody on the internet is saying that anchor and DEA are junk. I am not looking to spend $80 at the general motors dealership. I am not real hard on my car will a anchor or DEA Mount be good enough for me?

@Shonuff42080 6 лет назад

Your the best bro

@paulbouverette503 5 лет назад

Good video.

@joonajks 7 лет назад

Hey MR Chris, is it safe to support transmission and the engine with a bottle jack to replace mounts?

@IVANzFalcon 6 лет назад

is safe, just dont forget put the jack in the center of engine bro.

@samimeharigarza8954 4 года назад

good job

@bahramfaizi8604 Год назад

Chris i put my car in reverse it bangs or something like loud clunk with movement i can say , i did replace alot of components from transmation but didnt fix the issue plz help me boss

@Raynolasco9090 9 лет назад

I have a question. I drive a 03 jeep wj and I have a few problems one been the steering. I took it to get it alined but it still don't drive straight and if I get on the freeway I have to constantly play with the wheel to keep it straight. I think it's my steering gear box but idk how to change it and what else I should change while I'm at it. Thanks and great videos.

@chrisfix 9 лет назад

Raynolasco9090 Many times, your alignment shop will mess up and your car will pull even after they align it. You have around 90 days to bring it back to them and tell them that it isnt driving straight and it is tracking. They might lift it up and tell you it needs X,Y,Z and then you know. But most of the times, they adjust the tie rods and it is better. Here is how you can check your tie rods yourself which might cause the problem if they are worn (it is a little different setup in the jeep but the same methods apply): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-brI2feYiEi8.html

@RaccoonTotem 4 месяца назад

This video saved me $1,500 🎉 I had to change all of my motor mounts. The previous mounts were totally shot, I'm concerned that my engine and transmission may be slightly misaligned. Is it possible to check for this and diy engine alignment?

@johnnyappleseed02 7 лет назад

Hey ChrisFix - I see you use loctite on most bolts, however I noticed that you often don't use an thread lubricant - which I thought is interesting as these bolts will go untouched for a long period of time in harsh conditions - wouldn't it be advisable to use some type of lubricant on these bolts to ensure easy removal and providing some protection against the elements?

@jonathancastillo3878 6 лет назад

Loctite also provents rust my man

@Jstro14 6 лет назад

Lubrication of suspension bolts and engine mounts is not something you'd want to do better off to just put the bolt on torque it down and then paint brush on some old motor oil if you feel the need but if u put it in the threads how would the locktite do it's job? Bolts hardly ever rust where the nut is it's always usually the spots that are open to the elements.

@warnacokelat 3 года назад

This is the best thing I ever did to my car. Now it feels like brand new. I didn't even know that my car can run so smooth and quiet.

@patrickcalabrese5669 8 лет назад

Chris your a badass, I've been watching your videos for some time now! I've got a couple general questions, you seemed to just jack up the motor with no problems. The motor isn't hard connected to the vehicle? I always imagined that something external on the motor would snap. But it seems that the engine is just floating on the motor mounts? Is this the same for the transmission drive train? That its just "floating" under the car? I've got a 96 Silverado with 336k original miles on it. The truck is all original and I'd like to go through and replace all the bushings and lube the chassis. So my next question. I couldn't find a video with your truck. I don't like jacking up my vehicles from the side frame, I feel like it's an unnatural movement. Where is the best place to jack the whole front of my truck at the same time, and also the best place to jack my rear? Thanks, I hope some way your getting checks in the mail from doing these videos. The way you present them is fantastic and inspiring. Your the man. Patrick

@chrisfix 8 лет назад

+Patrick Calabrese there is wiggle room with the motor and tranny. The motor vibrates and moves a lot so they design it with space. I like jacking the rear up from the differential but for some reason every owners manual says not to... I never had a problem. The front crossmember that cradles the engine and holds the suspension is what I use to jack up the front of the truck.

@candyhearts3581 3 года назад

If you have a bad motor mount will it make whistling or grinding noises when you put it into drive

@justiceneveling3373 4 года назад

i need to replace all 3 of my mounts how do i find them? SX4 2008 hatchback

@alejandro9rojas 7 лет назад

Watching this cause I can't sleep. Happy new years!

@chrisfix 7 лет назад

+Alejandro Rojas happy new year!

@Tesoromio22 9 лет назад

Ah! Awesome top tip at the end of the video

@chrisfix 9 лет назад

Tesoromio22 Thanks! Something so simple yet so useful!

@avrohomreit9733 2 года назад

Can you guide me to locate the motor mounts on my Honda Fit Sport 2008?

@travelerintraining3353 6 лет назад

How long do you think this job would take? Thanks!

@lethal_carvideos8837 3 года назад

Hey Chris, do I need to worry about jacking up the car if I already have a lifted truck ?

@jayviz 4 года назад

Excellent Video. NEWBIE QUESTION: When you jack up the engine, don't you have to worry about putting strain on the transmission, exhaust, and all the other things the engine is connected to?

@Fireflyepic Год назад

Extremely late reply here, but for other people: no, you don't need to worry about that. The engine is engineered to move independently from the frame-- this is necessary in order to dampen vibration. The transmission and exhaust are placed on hangars or mounts of their own in the pursuit of vibration isolation, which thus allow for movement. If movement wasn't allowed on the engine, then it'd be vibrating on the frame and would be an unpleasant -- and loud -- ride.

@andresraygozaramirez4533 5 лет назад

You are good about cars

@hairpunut 9 лет назад

Chris I have a grinding noise coming from my alternator area when shifting into drive or reverse. Could this be a bad motor mount. I was told that they were by Firestone. But sometimes big mechanic shops tell you false info too make you spend money.

@chrisfix 9 лет назад

KingConker101 Here is how to check if your motor mounts are going bad. Try these tests: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZTRV5GXWpo0.html

@am.b5688 3 года назад

Your videos are amazing as usual. I would suggest to clean the threads of nuts and bolts before you put the blue locktite. Thanks

@Victorsvolkswagens Год назад

Makes better thread locker 😂

@balance828 9 лет назад

Sucks the part was defected because I remember watching the video where you changed it. Thanks for taking the time to record and do the job at the same time. Probably took twice the amount of time. Notice Sun light change from day to night =P

@chrisfix 9 лет назад

balancebox Thanks man! Yea, it takes about 4 times as long to record and fix the car than to just fix it. But it is worth it because so many people are learning how to fix their cars!

@vikingjoe93 9 лет назад

This is off topic Chris but i have a 1999 ford windstar that the cruise control stopped working on. i checked the number 10 fuse under the dash and also replaced the "brake stop switch" on the master cylinder. Any ideas on where to go from there?

@chrisfix 9 лет назад

vikingjoe93 Check the vacuum lines that go to the cruise control module under the hood. Does the cruise light come on when you try to activate it?

@vikingjoe93 9 лет назад

I'll look into the vacuum hose. I've never had a cruise control light come on that I'm aware of. Maybe it did and I just didn't pay attention to it.

@chrisfix 9 лет назад

The cruise control light lets you know it is activating. So with no light, you might have a bad cruise control unit.

@ahotdj07 3 года назад

Dealing with installing new motor mounts before; my strong recommendation for Honda - especially Accords is to buy Honda motor mounts. Aftermarket brands are not the best. You will pay more for Honda but it is well worth it in the long run.

@SoccerEverywhere2 2 года назад

Where can you buy the Honda motor mounts do they sell them at AutoZone

@ahotdj07 2 года назад

@@SoccerEverywhere2 I would buy the motor mounts specifically from Honda. If you can get EOM Honda motor mounts somewhere else cheaper, definitely but make sure you get Honda - nothing else.

@ernestochaparro2338 9 лет назад

good video nice job!!!

@chrisfix 9 лет назад

Ernesto Chaparro Thanks!

@Kugelbliz 9 лет назад

Very well explained woah man I can't get enough of your videos great work!!

@chrisfix 9 лет назад

Kr33p3r KILLER Thanks a lot bud! I appreciate all of your feedback!

@devbhatia733 2 года назад

People be binge watching "Money Heist." Me binge watching ChrisFix🤗🤗🤗

@Fonziegump 3 года назад

My car vibrates a lot at idle. Gets worse when I turn the wheel or turn on AC. My local mechanic says 3 out of the 4 mounts are broken. Fixing them should solve this issue?

@moshedavidsharabi3649 5 лет назад

Hey Chris, great video. I have a 2004 ford freestar 4.2L limited. So I wanna replace my motor mounts and transmission mounts. Also I wanna replace my shocks and struts, can you please tell me where I can get thes parts and whats the best parts to get . thank you.