How to replace a Motor Mount or Transmission Mount

Подписаться 10 млн

Просмотров 1,5 млн

50% 1

How to replace an engine mount, motor mount, or transmission mount. Learn the main methods for replacing a bad motor mount or bad transmission mount. This will give you an idea of how easy of a job changing a motor mount is!
How to Diagnose a Bad Motor Mount: • How to diagnose a bad ...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ru-vid.com_c...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Авто/Мото

Опубликовано:

1 мар 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 827

@OBZRV82 4 года назад

I'm not gonna lie, watching your videos are kinda therapeutic and informative. I wish u great health and wisdom. Peace..

@yoshimusmaximus3473 8 лет назад

My car works because of you.... You are awesome

@beaviselectron 5 лет назад

I LOVE THIS GUY!!! Ground-level, simple to understand, very thorough. Well done!!!

@HMJKS2000 4 года назад

When comparing his old videos with his newer ones the camera quality and quality of information is the same but you can tell how different his energy is. With his older videos he is seldom and serious but with his newer videos he is very enthusiastic and entertaining.

@BPoweredLove 4 года назад

Now it's "HEY, GUYSSSSS!! CHRISFIX HERE!!! AND I'M GOING TO SHOW YOU HOW TO FIX YOUR MF'ING CAR!!!"

@murdechoc 4 года назад

youtube forced him to do so, otherwise they would demonetize his channel

@IsaiahLove777 2 месяца назад

Bro said this 4 years ago and still true today

@richardcorlett117 7 лет назад

i can't thank you enough for the way you keep things simple and not have to hear yourself over talk. I recently watch a video for a 3 minute fix that was 14 minutes long. to much blah blah blah(which seems to be the norm). Obviously, your vids are not for the completely inexperienced, but for most of diy, perfect. Thanks again and keep up the good work

@jeffumbach 6 лет назад

I like that he doesn't spend the first 10 minutes of every video lecturing the audience before showing us anything and that he actually shows how to do it with mostly basic hand tools to prove that it can be done when so many videos go right to the impact wrench assuming that everyone has one. I love my air tools and they were a great investment but not everyone can afford a set nor can they be used in every situation.

@steverichardson4808 9 лет назад

you make some of the most helpful video's on the internet

@chrisfix 9 лет назад

Steve Richardson Thanks a lot Steve! I do my best!

@JohnstonPettigrew 6 лет назад

I second that.....great stuff.

@user-kn3li3pe9b 5 месяцев назад

I learn more watching his videos than I did at my trade school.

@zacharyburney3658 6 лет назад

I couldn't stop laughing when the mount hit him he soullessly said ow

@randalfuentes6953 5 лет назад

Me too man 😂😂. He is funny.

@alastair_the_lyon 4 года назад

Same!! Hahahahah

@furkanipekoglu 4 года назад

@@alastair_the_lyon minute?

@slammija9517 4 года назад

i only came to the comments after that happened

@jgfunk 4 года назад

"Ow" is said by me every 5 minutes when I'm fixing things on my own car!

@guesswhomartin9249 5 лет назад

I gotta tell you Chris, I love your videos. I love how you explain things. You are among the top 3 people I enjoy listen to here on youtube. You're a good man Chris.

@brosen101 7 лет назад

Great video, well done. Laughed when you pried out the mount and yelled ouch.

@chrisfix 7 лет назад

Thanks Brian!

@dedayrias2618 6 лет назад

marvel

@jesuscortina762 4 месяца назад

I love when things go smoothly

@michaelmcclaine2431 7 лет назад

Chris Fix you are awesome dude, you give a person the knowledge that they can do it themselves with a little discipline I really do appreciate all the videos you do for everyone. thanks again

@moneygeewtee 9 лет назад

Chris, you and realfixesrealfast are the only one's I've seen work on windstars, which is what my wife drives. I now have a clear understanding and confidence that I can do some of the work myself, AND I'M NOT EVEN A MECHANIC!!!! Thanks so much for putting in the time to show great instructional videos for guys like me. Keep up the great work! Take care.

@chrisfix 9 лет назад

moneygeewtee Thanks a lot man! I am glad my videos have helped! That windstar has 300k miles on her so you know it is being maintained lol. I will have a new video soon on how to replace the rear window defroster switch and also how to diagnose what is bad. New automotive 'how to' videos every Thursday and most Mondays so stay tuned!

@moneygeewtee 9 лет назад

Looking forward to it. Thanks again Chris. Take care.

@chocolate_squiggle 3 года назад

Fantastic, you have a gift for demystifying this stuff mate. So many times I've read things like '"Oh, just remove the motor mount and drop the engine down" - but if you don't even know what a motor mount looks like to begin with you can start descending down a never ending rabbit hole and forget what problem you were originally trying to solve lol :-) I love that you don't just show how to replace a mount - but WHY you might need to as well and what could happen if you don't. It's important information often missed by others. Money was tight growing up with just my mother and we only ever took our car to the mechanic when it was broken. I thought 'maintenance' was an oil change once a year. Best wishes from New Zealand, 2021.

@malihamady 8 лет назад

Very well explained! Chris is an excellent instructor. Love it! You saved me $500.00 that the mechanic wanted from me.

@chrisfix 8 лет назад

+Hamady Ba Awesome! I am glad to hear it!

@Patriot41776 3 года назад

Mine wants over $1,000. Luckily, I have my Chris fix Batman light I shine onto the clouds when I need help! Thanks Chris

@drippybodies5851 6 лет назад

Lol *wap* "ow, little painful there but" I died 😂😂

@hello-do7pc 3 года назад

Wap lol

@manuelesquivel2107 3 года назад

Lol

@healthfullivingify Год назад

Thanks a lot for a wonderfully clear explanation, Chris. I was able to change my 2001 Windstar's front and rear engine mounts and driver's side transmission mount successfully thanks to you. You earned a thumbs UP and a subscriber.

@Bikewithlove 4 года назад

Thank you, the wrench trick is something I never knew about before. I’ve gotten by on tapping the wrench with a hammer, but often there’s barely any room to do that. Going to double up on wrenches from now on.

@allanmercer6764 Год назад

Chris Fix your video was very helpful. Going in I didn't have a clue as to the complications I would be facing as a DIY job. You showed very clearly what has to be done and now I need to decide 1) let a mechanic do it and pay through my schnoz or 2) do it myself. Thanks again, Al

@hologramtherapy21 8 лет назад

I will probably never do this in my life but I really enjoy this video and your other videos. You are very knowledgeable and talented both as teacher and cameraman. Very interesting to watch! Thanks!

@chrisfix 8 лет назад

Thanks a lot! I am glad you learned a lot!

@youngurbanpsychopath2321 7 лет назад

I do the same, probably wont ever do it but its fun to watch and learn

@shariftanzim 7 лет назад

same to me, will not gonna do it by myself but sure it is helpful to identify the problem and deal with the workshop

@blacksp2705 7 лет назад

I did it looks good

@romangrigorev6018 7 лет назад

Just came back only to review 2-open-wrench trick! Saved me time, nerves and money! Thanks, you're a real pro!

@ruliz21ify 10 лет назад

ChrisFix Great video!! At this point I'm just watching your videos on how to fix things I don't need fixed. Thank you, hope to see more of your quality work!

@chrisfix 10 лет назад

thanks Raul. I'm glad you are learning a lot. Now if you have a problem then you will know what what to do!

@joecosgrove3593 4 года назад

I like these instructional videos. I do have some doubts about when you say if you can change one, you can change them all. I do think certain vehicles have differences that can make them substantially more difficult.

@enforcementofficer4802 6 лет назад

Nice to see a very clear video accompanied by very clear instructions - thanks from the uk!

@ellbdotmusic3521 4 года назад

Chris you make it seem easy like I can do this! Thank you man. I appreciate you.

@erickvillarreal9496 8 лет назад

you're videos are very helpful,makes me work on my car from now on thanks.

@pedrovital2832 5 лет назад

He makes it look so easy thanks for the info!

@scottbryant9735 9 лет назад

Thanks for the video man! I just brought a 2001 Hyundai Santa Fe to Costa Rica and it had been vibrating and knocking like crazy especially when the tranny is in D. The mechanic jacked it up and it was exactly the same thing. I enjoy your videos very much.

@chrisfix 9 лет назад

Scott Cabrera Glad the video was helpful Scott!

@jinxycast 4 года назад

Watching his new videos, compared to this older one, his camera style and presentation styles are similar, but quite different at the same time. His enthusiasm is way higher in his newer videos too. But great work. I have to replace the motor mounts in my wife's VW Routan. This should help.

@chrisfix 4 года назад

Thanks!

@168grhp Год назад

Filmed, explained, and demonstrated perfectly! Thank you!

@chrisfix Год назад

Thanks! Glad the video was helpful!

@RadioControl360 7 лет назад

"So now, I'm just gonna, pry that out- ow!" 😂

@terryterrell9351 6 лет назад

you are a very good mechanic I am 56 years old but don't know a lot about cars you make it look so easy.

@bestbuildpc 10 лет назад

very educational video. I love it. Everyday I learn something from u. Thanks you very much!

@chrisfix 10 лет назад

Thanks and perfect! Glad it is educational! Love hearing this!

@edriley5866 7 лет назад

Clear, voice, tools, actual binds and fixes. Great communication!

@chrisfix 7 лет назад

Thanks Ed! I try to do that with all of my videos!

@queenofpoutine Год назад

That was an excellent instructional video. Clear, concise without a bunch of needless (the ow! was definitely needed!) chatter.

@chrisfix Год назад

Glad it was helpful!

@stanislav9608 4 года назад

Great tutorial, as all of your videos. Everything is straight forward and clear for the vehicle you are working on. I am going to lift 1-2 inches the engine on RX 350, 2015 to get access to the one of ATF pan bolt, which is blocked by sub frame. Unfortunately, I don't have that solid place to put my jack, and I would never place the jack under the ATF or oil pan, despite there are a lot of videos with the jack under the oil pan. My question is can I jack up a bit the engine by placing the jack under the transfer case. It looks for me like a solid place.

@bigdbigd2353 3 года назад

Good job on these videos. Very informative and easy delivery.👍🏻

@chatomairi 10 лет назад

Love that you torque everything and you don't drive in all your nuts and bolts with an impact wrench. Those things save time but they put too much pressure on the nuts and bolts.

@chrisfix 10 лет назад

Thanks! It also makes it impossible to get off if when you tighten them with an impact wrench!

@jeffumbach 6 лет назад

If you over-torque them then yeah, that's why I specifically bought an impact wrench with multiple settings so that I could use it to remove bolts and drive them back in but drive in just enough that the torque wrench is used to finish the job. I've also found that I've less likely to break the head off a bolt with the impact wrench than with a breaker bar, never broken one with the impact driver and if I'm worried just start on the lowest setting and work up until it finally starts turning.

@marie3321 3 года назад

love this channel, subscribed right away. i2012 nissan sentra SR, ive had multiple repairs with my car, last mount to do is the transmission mount i suppose because i am still having this exact problem. i also have a brake problem now, looks like it could be the rotors because of the steering wheel vibration is severe now when braking, im just hoping it is anything worse like an axle or something. the fun never stops ....

@eddiesanchez7960 5 лет назад

Love your videos man, have done some repairs following your videos. Just one thing...your normally a lot more enthusiastic in your videos, that's one thing i love about your videos... hope you come back to your normal self

@guapman11 7 лет назад

yo, you re vids are the bomb diggy, most of these jobs I thought had to be done in a garage, you're just out there chillin makin engineers look bad...love this stuff duude

@chrisfix 7 лет назад

Glad the videos are helpful!

@josequintana5559 4 года назад

Don't need to change out a motor mount. But, I enjoy your videos, they've been very helpful. Thanks for sharing.

@jdemty 9 лет назад

Excellent video. Thanks for producing it. And I love the double open end wrench tip.

@chrisfix 9 лет назад

Joe D Thanks! Glad you learned something new!

@danielrader6496 8 лет назад

good point on not jacking up on oil pans... they will cave in and can destroy seals.

@michaelstein586 7 лет назад

got it

@davidherd503 3 года назад

So where do I jack engine from bottom so I can take weight off the mounts to loosen bolts 🤦🏾‍♂️

@simonseth1000 8 лет назад

As usual wonderful work MR FIX

@ericcross8361 9 лет назад

Great Video! You provided very clear information and I feel more confident about attempting to tackle this challenge.

@chrisfix 9 лет назад

Eric Cross Thanks Eric! Glad the video was helpful and made you more confident in fixing the problem! Let me know how it goes! New automotive 'how to' videos every Thursday and most Mondays so stay tuned!

@carsfabio 8 лет назад

thanks for the video. you just helped me fix my 3.8L lincoln. major props.

@chrisfix 8 лет назад

+scott koepp awesome!

@silenceimurderyou 9 лет назад

oh my god you already have made a video on this...thank god

@chrisfix 9 лет назад

CatlinCustoms Yep. I have three. A transmission mount replacement (this one), a motor mount replacement: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-33k3vL-j68Ya.htmlnd a video on how to tell if your motor mounts are bad.

@iskanderrarus5957 8 лет назад

+ChrisFix Thank you, sorry to bother, i am new, but how can transmission move up, is it not bolted to the frame?

@silenceimurderyou 8 лет назад

No man its just bolted to the engine

@michaelbretos3342 7 лет назад

CatlinCustoms Oi

@davidlee5844 6 лет назад

CatlinCustoms

@samuelsmith9955 4 года назад

This was my next job,had a bad feeling about it but not now,thanks as always.

@margaretflores546 8 лет назад

Just awesome i don't have the same car but this help so much!!! Thank you !!!

@andrewoliver9686 7 лет назад

Damn you make things look easy. I hope I have this much ease with my Taurus

@sonnypetty1176 3 года назад

First of all Chris, thank you SO much for your videos! You have no idea how much they have helped me! But was wondering if I could ask you a general question? What would make my 2011 Lexus is250 “wander” on the highway? Almost like it’s being blown side to side by the wind? I have replaced everything I can think of and nothing is helping! I thought if anybody knew, it would be you! Thanks again for lending us your skills and knowledge!

@drizzydriz92 6 лет назад

It seems like every time I have a problem i think to myself “did chrisfix make a video on this?” And of course Chrisfix saves my butt again. Thanks Chris

@frankworld13 6 лет назад

very useful video thank you Chris 👍

@charlex1984 5 лет назад

I have saved £100's because of you Chris, keep up the great work bro!!

@mikemclean2709 5 лет назад

Hey chrisfix must a pain working on cars with all this rain we've been gettin, we feel like a washing machine here in New England wash, rinse, repeat lol keep up the great work.

@billthames9564 2 года назад

a well-edited video !! very good instruction.

@PwnzTube 6 лет назад

Thank you so much for this video I was lookin at shelling out 300 or more to a mechanic because I had never had to replace these, I was wondering if you had to disconnect anything like wires or hoses before jacking the transmission and/or engine up?

@zx8401ztv 10 лет назад

Smashing video. Like the overdubbing for extra points and bits not said at the time :) Cant really get in with a torque wrench in limited spaces, i dont think it matters chris, as long as you "Make the special face" while tightnng the nut, or for older people "The noise" as well lol.

@chrisfix 10 лет назад

I make the noise when I break bolts but I usually edit that noise out! Hahaha, thanks bud!

@nighttrip254 7 лет назад

Hi Chris I'm from Jordanthat was the best video on the internet thanks alot keep it up 👆

@joepedroza4707 Год назад

I still think its Kevin Bacon doing these videos. LOL Chris your the man.

@chrisfix Год назад

Lol thanks!

@GabrielBadoyen 7 месяцев назад

Thanks man this helps a lot 👍

@totalannihilation9065 5 лет назад

It would be cool if you made a video on how to maintain your tools. Like the floor jack you got.

@srikarvundavalli5934 7 лет назад

Well Done Chrisfix I have been watching almost all of your videos. I find your videos the best than anyone else on RU-vid. The video of painting the wheels from project police interceptor helped me and I too painted the wheels on my chevrolet beat (called beat in India and spark in other parts of the world). I would wonder how you could work on the car and make nice videos yourself. And yeah you have a nice set of tools. I'm following your videos!

@confused9525 6 лет назад

Would be awesome to see a video on how weightloss in a car would effect mpg, there are a lot of videos on how much performance u gain but i wanna improve my mpg and wondering if replaceing the seats wheels exhaust with lighter versions will make a noticable difference

@classact9557 6 лет назад

“So now I’m just gonna... pry that out, Ow!!!” That was the highlight of the video

@kestermckain9092 2 года назад

Great stuff.Very Well Explained.Edified !

@rubencastillo6970 3 года назад

😂 you can tell he's more enthusiastic in the newer videos but the videos are still amazingly filmed and very informative👌🤘

@jbirdperez6003 8 лет назад

very good work.. you are a teacher

@isauceso 6 лет назад

Burnt the hell out of my hand now i can't service my car. Going through your Vids is getting me excited to get back at it. You da best

@jahahalhahah9114 10 лет назад

great vid when that transmission mount came off tho made me LoL xD

@peterpurol7873 2 года назад

Any more videos featuring your '96 Corvette would be greatly appreciated. Too bad it's a daily driver. You could probably do an entire series on C4 corvette repair and easily have a gazillion eyes glued to your videos (well a gazillion more I should say). Thanks for all the information you've provided to date. TCOY! Happy Thanksgiving!

@lonerstoner9258 4 года назад

I paid a mechanic 1600 dollars and they didn't even last a year after he replaced them. Im going to fix them myself, thanks Chris for showing me how.

@chrisfix 4 года назад

Darn! But now you can make sure the job gets done correctly!

@insertcoinstobegin7827 10 лет назад

This is exactly why I love RU-vid. I googled how to change motor mounts, and it brought me to this video. I have a silver 1997 Ford Windstar that is silver, a carbon-copy of the one in this video except for the rims. I am looking to sell mine but I have a few issues (one being the motor mounts), the others are the rear AC fan seems unbalanced (makes a loud humming sound), the drivers door glass rattles when you shut it (probably a plastic clip or something), and the speedometer fluctuates. ChrisFix What's your opinion of the speedometer and the rear AC fan?

@chrisfix 10 лет назад

***** Great! Glad the video was heplful! The AC fan probably has debris in it which is why it hums. That is an easy fix and I am publishing a video on that next week. It is on my other ford, but it will be the same idea. The speedometer can be a bad sensor or a bad gauge.

@funsky77 7 лет назад

This is scary to even think of doing at home!! Well done!

@xraydelta100 8 лет назад

super tip extending wrenches for leverage..real nifty...thanks.

@calebproductions5970 7 лет назад

Thank you this helps a lot

@pezzep2143 6 лет назад

Excellent video, thank you so much!! +++

@beast11135 6 лет назад

I have a 2003 Honda Accord V6 and It has two transmission mounts at the bottom of the driver side that are both a very tight fit. Damn Honda's usually have a lil room to work with lol. I got some useful information from this video. I'll be doing the work possibly tomorrow. I can't find any how to videos for my car either.

@franzrobochicken6211 6 лет назад

Awesome video. I had a question for the upper bolt on the transmission mount? what would be the correct tool? to use for torquing to specs instead of just winging it tight? I did notice it would be very tough to put a socket in place on that top mount for twurking 😎 Thank you Chris 👍

@RamonLFrancisco 6 лет назад

You make awesome videos! Thanks!

@bryanrb57 7 лет назад

This was helpful. I am about to start this myself. Probably won't finish in ten minutes though..... Thanks!

@chrisfix 7 лет назад

+Bryan Barnash glad the video was helpful

@julieoneil7895 8 лет назад

This was a great video and really makes me wonder if the transmission shop I went to last week gave me a quote to rip me off because I'm female. The part was $480 and LABOR was $833 - and that was just for ONE mount. This is why I still toy around with the idea of becoming a mechanic and opening up a female employed mechanic shop. Thanks for the video :-)

@chrisfix 8 лет назад

+Julie O'Neil Hopefully they didnt take advantage of you :( but I am glad the video was helpful!

@FunDuude Год назад

very nice. Great video.

@RB-el8zt 6 лет назад

Chrisfix for President👍🏽🇺🇸

@chuckloh3008 4 года назад

Best channel ever. Thx

@user-il6wo3ud2p 6 лет назад

Well done....this is simple way of replacing...

@zzgolf 9 лет назад

great simple easy to understand...thx for making point of jacking engine/trans on solid part not the drip pan

@chrisfix 9 лет назад

zzgolf Thanks and no problem! I try my best to give solid information (get it, solid haha).

@lkhbhydroponic6858 3 года назад

You make it sooo easy 😆 awesome thanks

@syedamirali9060 6 лет назад

Great video and we'll described 👏👏👏👏

@RobertSmith-di5ll 7 лет назад

yet another apparently impossible task for a basic skills Diyer to achieve - clearly explained and clearly recorded - Well done Well done Well done

@chrisfix 7 лет назад

Thanks Robert. It really is not hard with the right tools and know-how.

@balentinhernandez6685 8 лет назад

Thanks, this video helped me out!

@chrisfix 8 лет назад

+Balentin Hernandez Glad it was helpful!

@StrokaReviews 8 лет назад

great video Chris

@steven_reed 11 месяцев назад

This video is so helpful for the engine mount replacement I'll have to do on my truck soon. Thank you very much! One question. At what point did you use the jack stands? I may have just missed it in the video. Thank you!

@LinuxJedi 8 лет назад

this guys a genius i live your channel haha ❤

@jangyoo3862 7 лет назад

Thanks again! You show me a lot>

@ramongalindoh9285 7 лет назад

Gracias Chris. it worck perfect ¡

@syedhamid6858 9 лет назад

Very Helpful. Thanks

@chrisfix 9 лет назад

***** No problem! Glad the video was helpful!

@galinapeele4229 9 лет назад

Thanks so much this was very helpful

@chrisfix 9 лет назад

Chante Peele Glad the video was helpful!

@pac8447 5 лет назад

How high can the engine be lifted? How do I know when to stop jacking

@exmember1607 4 года назад

Pac 84 you want to lift it minimally. Just lift it to where you can get the mount off. You don’t want to break any wires or hoses or anything that’s attached to the engine and frame by lifting it too much. Hope this helps

@ezequielocampo7418 3 года назад

@Bruce Lee he says that in the video

@davidherd503 3 года назад

@Anonymous Anonymous so jack the engine up as lil as possible I’m not changing mounts I jus need to loosen it a lil to get the starter out

@Jaytec359 8 лет назад

Would you suggest putting thread locker on the 2 engine mount bolts + 1 engine mount nut, to prevent them from coming out from excess vibration? Or should the Engine Mounts + Shock Absorbers prevent any serious vibrations from reaching those bolts? Also, Love your Videos, they're very informative, keep up the great work!