how to replace a rack and pinion Toyota Yaris (no subframe removal needed) 

Was one of those models a 2nd generation Scion tc? I have to change my rack and I’m really hoping this works.

Thank you so much

Your welcome boss!!! 😀

Muchísimas gracias por poner su video. Lo seguí al pie de la letra y pude cambiar mi rack and pinion en mi Yaris 2008.👍

Is it a automatic or standard

It's similar procedures boss..

@@luckysdiygarage it's automatic

Hi you can also lossen the other side to get more slack..

@@luckysdiygarage brrroooo thank you that's exactly what needed to happen. Truly appreciate the help, I was stuck.

Your welcome boss

​@luckysdiygarage do we need to support engine or transmission when doing this as you are removing the rear lower mount bolt. Secondly when putting the subframe bolts back together. Do we need tighten in any order to avoid alignment ment or other issues Thnx MM

Yeah my dumbass forgot to put it on so I had to remove the steering column shaft and reinstall the circle bracket that holds the rack and pinion dust boot in place.. we learn from our mistakes haha🍀

@@luckysdiygarage shoot I bet that was fun haha

Hi andy you can Loosen the other bolts on the other side of the subframe to get more clearance to remove the rack and pinion

@@luckysdiygarage I got it! Just removed the 3 bolts on driver side and bought a huge pry bar . It worked. I have the dog bone style mount. Thank so much! Could not have been able to do it without the video. Kudos. Some reason the passenger side boot was filled with water and everything corroded. I’m thinking a/C water? Boot looked ok. Thanks again.

@@Andy-in-Spain haha it's always good to have a big ass pry bar around sometimes..

Thank you so much 🙏....there are no power steering lines on this rack

@@luckysdiygarage I was able to pull a rack and pinion from a another car at the junk yard and swap into mine at home. Thanks to your video I was able to do that! Older Yaris (2007) but same concept, thank you very much!

Yes