No video :(

How to replace a temperature blend door motor/actuator on your 2007 ford f150

Подписаться 312

Просмотров 67 тыс.

50% 1

Heres a step by step how to video on a temperature blend door motor/actuator video for you 2004-2010 ford f150. Very common for that part to fail on your truck, good way to tell if it's broken. Sometimes it will click or it'll be stuck on blowing hot air or cold air that easy! Tools you'll need are a 7mm socket with a ratchet preferably 1/4. Trim panel tool small screw driver or pick, 8mm wrench the ratchet one work best! Here's a link to this part on Amazon. www.amazon.com.... Thank you please like subscribe and share. This video is for informational purposes only.

Опубликовано:

17 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@debrashawn 8 месяцев назад

Hey! Thank you for your help I'm a 56-year-old housewife from Detroit Michigan and I'm working on mine right now following the directions on your video I have it removed so far I'm just about to put it back together again! Thank you for the video! I'll let you know if it😊

@edfratzke6184 5 лет назад

Thanks! Just did my 2008 in about 2 hrs. A few contortionist moves but used a plain old box wrench and now I have AC back for about $30.

@Mongo_mav 5 лет назад

Right on!

@mikethompson5313 4 года назад

Great video! Thanks for the walk through. Clearance on the 3 bolts was difficult on mine, but luckily I got the TEKTON 18063 Stubby Combination Wrench, 8 mm on AMZN and I was able to get'er done. It took a while though, but my heat is now working after years!

@Chris-qx9gp 3 года назад

Thanks for the video helped a ton. Only thing you forgot to mention is that you need hands the size of a 4-year-old to get to the screw on the back side through the glove box.. at least on my 07 f150 lariat I had a heluva time getting my hand back there. My hand and forearm looks like I stuck it in a weed wacker lol but I got it.

@readmore3634 2 года назад

Hahahah....I'm next....

@purodesmadre713 6 лет назад

You just saved me $300. Thanks man.

@Mongo_mav 6 лет назад

Jorge Acuna your welcome glad I could help!

@superliner19 3 года назад

Thanks made my life easier

@breta5261 5 лет назад

Thank you, great vid, it helped me do the job, keep up with the help video's.

@Relic67 5 лет назад

2006 about to replace for a second time. Such a pain. Thanks for the vid though. Good refresher for me.

@jeffreyslay1607 4 года назад

What does it do

@Relic67 4 года назад

@@jeffreyslay1607 It moves a door inside the HVAC system that either lets in hot air from the heater core or cold air from the AC system or a combination of both.

@jesserh5908 4 года назад

Thanks man I replaced mine. Was a challenge cuz of the tight squeeze but I got it in, n got all 3 8mm bolts in snug. Couldn't fit a ratchet wrench in because the walls of the wrench head were too thick and there was very little clearance between the bolt head and the housing of the actuator so I had to use a regular 8mm wrench.. Lost a bolt and the wrench at one point. Retrieved them some how lol. Heats working good!!! Also I initially thought it was the heater core, paid $35 to have diagnosed at the automotive shop

@bobbyd1089 4 года назад

Thanks! This helped me out

@johnfrederick9683 5 лет назад

Thanks Trevor! Works like a charm now! Those 3 bolts were tricky... I needed to just take a mental picture of the them and then just go for it by feel. (08'_F150_5 speed)

@Mongo_mav 5 лет назад

Awesome!

@229gabriel 5 лет назад

Excellent job man, replacing mines this weekend.

@Mongo_mav 5 лет назад

Thank you. Just a common problem. Everyone needs heat and cold air!

@Mandapeh 6 лет назад

Great video!!!

@reginaspayd2157 2 года назад

Thank you!

@nafrewop 2 года назад

Cussing and swearing optional but encouraged 🙃

@nathanburt6053 4 года назад

What if the gate is open or closed? Does it matter? I would think the actuator has to go in while it is open or closed? I dont know which one.

@timdenney83 3 месяца назад

I would like to know that also

@pacificcityfishing684 4 года назад

Thanks very much

@jdollaz170 2 года назад

What would be your next guess after replacing the blend door actuator and still no heat

@yessigonzalez8187 Год назад

Heater core ? Have you done that ? Having same issues on my 06 f150

@hatteraslabuf Год назад

Sure wish you would’ve shown how to get that ratchet end on the screw hex head. The ratchet end is thicker which prevents you from getting hit next to the housing to back off the rear screw.

@adiamond1978 11 месяцев назад

Are you supposed to "calibrate" these after replacement on an 07? Seen a lot of forums talking about that with different methods of doing so.

@bryonfortney8235 4 года назад

I "think" this is my issue however, how do you know its not an issue with the actual controller. Hope its actuator, a lot cheaper than controller! Thanks for video, this is great!

@ybclear 5 лет назад

Great video. I could not get my new actuator in. The splines on the old one are not in the location, The space does not line up with the line on the housing one the one that I removed - tried to turn on ignition to move the shaft around some so it would drop in - no luck. Any tricks?

@ybclear 5 лет назад

@Dak Kerrins Thanks - that did the trick!

@bfoster1914 4 года назад

I realize this was a year ago but what was the trick?

@mmoreno940 5 лет назад

I have A 2008 f250 is the location of the actuator the same?

@stefanmccellon8212 2 года назад

Would this fix my air not coming out of the dash when selected on dash. I have ac and heat but only comes out of the dash if I have it set to floor.

@albertocordero3090 3 года назад

Hello I have a 2007 f150 and the air does not cone out the front venta just the bottom do u have any feedback u can offer?

@albertmolinar2432 3 года назад

Is there actuator for driver side and passenger or is it one for both

@darrellbaldwin4365 3 года назад

I have replaced the the actuator on top and the one near the gas pedal and I still have nothing but heat. I can see one on the right/passenger side but ductwork is in the way. I can’t find a video for removal of the ducts or the actuator.HELP! I’ve been working on this truck several days. I bought my replacements from autozone and O’Rielly, both DORMAN brand, now I’m told that they might not even work.

@866mary2 2 года назад

I'm guessing this would be the same on a 2007 Lincoln Mark LT?

@Mongo_mav 2 года назад

Yes it should be similar the trim removal might be different.

@DLGNT 4 года назад

Mine won’t switch to defrost or the floor vents it only blows through the main vents even when I have it set to defrost or floor. Will this fix it?

@dholzner 2 года назад

No, that problem is under your steering wheel

@NickW90 Месяц назад

@@dholznerwhat is under the steering wheel?

@NickW90 Месяц назад

I have the same problem what was your fix?

@ufartface 4 года назад

seems like it wasnt the blend door actuator but the air flow directional door actuator

@raditzsayayin7481 5 лет назад

Will it not allow to switch from hot to cold? Mine is stuck in heat. Thanks

@Mongo_mav 5 лет назад

Yes that is what this actuator was doing before it was replaced.

@466htrd 5 лет назад

Hopefully when you take the actuator motor off, the blend door itself isn't broken down inside the heating unit

@Mongo_mav 5 лет назад

Unfortunately that does happen sometimes.

@jojojo57 5 лет назад

My truck has a ticking sound that happens sometimes but not always. The heat still works fine. It’s just a noise that sometimes happen, like a “tick tick tick “ kinda sound, sometimes it lasts 10 minutes sometimes it lasts longer sometimes it doesn’t do it at all. Any idea ?

@Mongo_mav 5 лет назад

Sounds like a blend door is stuck wanting to switch from hot to cold air but since it's stuck it won't move and cause a clicking noise. Could way to test it is when it's clicking unplug the connector and if the noise goes away you just diaged the problem.

@jojojo57 5 лет назад

@@Mongo_mav okay. you're talking about disconnecting the connector of the actuator ? then would i have to replace the blend door or the actuator ?

@carlosquintanilla3742 6 лет назад

Trevor how many blend door motors are there. I just had mine replaced and the guy told me there were three of them.

@Mongo_mav 6 лет назад

Yes there is three of them. Mode door actuator air inlet door. Mode door actuator defrost/panel/floor floor. And the one I'm replacing in the video temperature blend door actuator.

@jimhans1 5 лет назад

Trevor Pehrson what does the air inlet motor control? Outside or recirculating air? My 2006 f150 lariat king cab won't blow hot or cold. It blows air, and the vent options (defrost, dash vents, floor) works, but the temp stays the exact same whether I select 60 degrees or 90 degrees, the temp never changes. Guessing it's the blend door actuator motor.

@terry8041 6 лет назад

On my 05 f150 the ac blows but not that cool and it puts condensation in the middle of my windshield. I had it checked last year he said freon was fine. Any ideas.

@HOTCBrandonDavid 6 лет назад

Terry Dillard i have the same problem but I think that i may need a blend door actuator like what he showing

@Mongo_mav 6 лет назад

Terry Dillard You have a restriction somewhere. Either a vent door partially open and closed. The actuator can allow the blend door to open all the way. Condensation can go many different ways. Depends where you live to.