How To Replace a Water Pump in the NewAir AI-215 Series Portable Ice Maker

Подписаться 4,5 тыс.

Просмотров 24 тыс.

50% 1

How To Replace a Water Pump in the NewAir AI-215 Series Ice Maker
Tools Required
Regular Screw Driver or Drill
Scissors or Pliers
Zip Ties
Steps Involved
To get started remove any water remaining inside the ice maker (if any) before beginning water pump exchange process, then follow these steps:
Flip the ice maker over so the face of it is flat on the table.
Remove the 7 screws located on the back panel. Remove the 2 screws located on the underside of the left, right and back panels (6 total).
After screws are removed, gently begin to remove the 3 panels: The back one and 2 panels on each side. The back panel will require that you get the power cord through cut-out to fully remove it.
Next, the Support Brace will need to be removed. To do so you will need to remove the 3 screws on the top of it and 2 screws on the bottom of the brace. This will remove the actual water pump.
Remove 1 screw located directly under the water pump to free it from the base of the ice maker.
Pull off the 2 water tubes that are connected to the water pump (One in the front of the water pump and one on top).
Follow water pump wire to the unit's PC board and unplug (Scissor are required to cut off zip ties).
Once the water pump is removed from the unit, unscrew the 2 screws that are holding the water pump and water pump housing together.
Use the housing previously removed, and screw it on to the new water pump (make sure that the base of the water pump housing is facing downwards, this is so it can be screwed onto the base of the ice maker)
Plug in the new water pump to the PC board where you previously removed the old one (It should read "PUMP on the PC board where it needs to be connected to).
Once the water pump is clipped on, you can then place the water pump.
Zip tie any loose wires securely back in place.
Begin to put the support brace back onto its original place. Put the 3 screws on the top and the 2 at the bottom.
Put the 2 side panels in first followed by the back panel (the power cord will need to go thought the cut out on the back panel). You can then screw the 2 side panels and the back panel together. Once the panels are adjusted, you can then secure them to the base of the ice maker.
If you wish to purchase a replacement pump for your AI-215 Series ice maker, contact a member of our customer care team today at 855-963-9247.

Хобби

Опубликовано:

20 апр 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@bapiv1 7 лет назад

Any thoughts on how I can get the ice maker to dump into a cooler? I would like it to make as much ice as possible before it stops. I will even cut a hole in the front and have it dump into the top of a cooler? Thank you

@rexparker5147 7 лет назад

How do you get and where do you get a replacement pump for an igloo portable ice maker model ice103?

@RANDALLOLOGY 6 лет назад

It seems that the design of the ice maker is made by one company but has a bunch of brands labeled to them. Do question is. Where can one buy replacement parts for them regardless of the units name ???

@newairusa 6 лет назад

Hey there, thanks for your question! Any available replacement parts will be available from the product pages on newair.com. For this ice maker, you can hit the "Replacement Parts" tab, or scroll down to the bottom of the page. The link is below! I hope this helps, let us know if you have any other questions! www.newair.com/products/ai-215ss

@judiththompson3120 5 лет назад

OK, plugged the unit in kitchen also dinning area still nothing. Help with advice.

@newairusa 5 лет назад

Does the control panel screen light up at all when you plug in the unit? If not, there is likely some electrical issue with the unit. I recommend emailing support@newair.com so we can help you out more directly!

@Kaybowser 4 года назад

Where do I get a replacement water pump? Can you provide a link. I searched but could not find one.

@newairusa 4 года назад

Here you go! www.newair.com/products/ai-waterpump-replacement-water-pump?_pos=2&_sid=d53d0d4a5&_ss=r

@uriuriuri 7 лет назад

Thank you this helped me!

@judiththompson3120 5 лет назад

Took unit out of box, plugged in and nothing. What does that mean?

@newairusa 5 лет назад

Hi Judith, sorry to hear that your ice maker isn't working properly. This could be a number of different issues. First, I would double check to make sure that plug still works by testing some other appliance. If the plug is functional, then obviously something is wrong with the unit. Does anything come on the screen on the front of the unit when it's plugged in? You should see a power icon in the bottom left of the screen once you plug it in.

@judiththompson3120 5 лет назад

No lights no noise nothing, I think its the cord.

@newairusa 5 лет назад

Well that's not good! Could you send an email to support@newair.com so we can help you out further? Just mention to them that you were getting some help from us on RU-vid, and explain what's wrong with the unit. If you don't hear back in a day or two, let us know here and we'll make sure you get the right help!