How to Replace a Wayne Dalton 9100 Bottom Retainer Seal

Подписаться 9 тыс.

Просмотров 23 тыс.

50% 1

It's not too difficult to replace the bottom weather seals on most garage doors. Yet when it comes to replacing the seal and bottom retainer to the Wayne Dalton 9100 model garage door ... well it might take you a bit more time than usual. This video will provide some pro tips on how to do just that. #wyanedalton #garagedoor #garagedoorweatherseal
Visit our website:
dontstresscallsos.com/
Donate to our channel:
paypal.me/sosgdos
Want to send us something?
Contact: sosgdoservice@gmail.com
As an Amazon Associate I earn from qualifying purchases. Affiliate links below might pay us a commission:
Wayne Dalton Weather Seal (18 Foot)
amzn.to/3PBPBrg
Wayne Dalton Weather Seal (9 Foot)
amzn.to/3PzrF7H
DEWALT Screwdriver Set, Security, 31-Piece (DWAX200)
amzn.to/3T4fO4B
REXBETI Torx Head Screwdriver Bit Set, 1/4 Inch Hex Shank S2 Steel Magnetic 3 Inch Long Drill Bits, T5-T40, 12 Piece
amzn.to/3T1Qz2T
GEAR I USE TO MAKE MY VIDEOS:
Sony ZV-1 Camera for Content Creators, Vlogging and RU-vid with Flip Screen and Microphone
amzn.to/3mX45oK
Sony ZV-1 Digital Camera with Vlogger Accessory Kit (4 Items)
amzn.to/3aoHa0G
DJI Osmo Action - 4K Action Cam 12MP Digital Camera with 2 Displays 36ft Underwater Waterproof WiFi HDR Video 145° Angle, Black
amzn.to/32E83JP
Retro Rewind Classic Polarized Sunglasses for Men and Women - UV400 Protection Stylish and Trendy Unisex Sun Glasses - Cool Vintage 80s Shades
amzn.to/3mtw3sv
Amazon Essentials Men's Regular-Fit Long-Sleeve Henley Shirt, Blue Heather, X-Large
amzn.to/3iy45dI
Anker Portable Power Station, PowerHouse II 400, 300W/388.8Wh, 110V AC Outlet/60W USB-C Power Delivery Solar Generator for Camping, Road Trips, Emergency Power, and More
amzn.to/3pZvGJ1
RGB Handheld LED Video Light, Wand Stick Photography Light 9 Colors with 68" to 78.7" Tripod & Remote Control, Adjustable 3200K-5600K
amzn.to/3amADTT
O’Bright Dimmable LED Torchiere Floor Lamp, 270° Tilt Head, 3000 Lumens, Adjustable Brightness, Standing Pole Lamp / Reading Light / Floor Lamps for Living Room, Bedrooms, Dorm and Office (Black)
amzn.to/3msB7gA

Хобби

Опубликовано:

19 авг 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@Kennardy Год назад

Nice! Thank you! My local Wayne Dalton dealer would not replace the seal! Told me I had to replace the door! Thank you again!

@venukodali4273 Месяц назад

Where did you buy the retainer. I tried on internet and could not get any good link.

@all4chem05 11 месяцев назад

Would be nice to see how you were able to get the seal back into the track.

@sosgds 11 месяцев назад

Hello. I do have a video showing how I replace the bottom seal. The trick with the Wayne Dalton retainer is that there's a notch at each end. This notch needs to be filed down. It's not easy but it is doable.

@NordicDan 8 месяцев назад

@@sosgds I wish I would've just filed down those nubs on mine when I replaced my seal a couple years ago. It was a SERIOUS pain in the arse to replace that stupid seal. As it was, I spread the "tracks" at the ends where the nubs are, thinking that I could pinch them back together enough to hold the seal in place when I was done. Boy howdy was I wrong. I did it on the door though so next time (if I don't just 86 the entire door first) I'll pull the retainer off completely and hammer the ends closed against my anvil.

@garagedoordoctorofhouston6518 Год назад

Nice job

@sosgds Год назад

Thanks Cody!!!!

@techwithjbhacks Год назад

I don’t have a garage door but if I did I would use your videos for guidance.

@TheUabengineer Месяц назад

Maybe this is a stupid question, but am I supposed to detach the door from the drive chain before this repair?

@walishakoor7765 7 месяцев назад

Sir could you please inform me exactly where to place the each pair of locking pliers?

@denm6893 2 месяца назад

Basically anywhere between a set of rollers so the door doesn't come down.

@user-hi6uh1of7p Год назад

I am located in Illinois, Chicago

@greatdoorsandgates4991 Год назад

The only way to replace the infamous WD bottom seal, WITH RETAINER.

@rickeiseman7935 Год назад

Where can you find the weather seal kit used in your video ? The link you provided to amazon doesn't match what you used in your video .

@sosgds Год назад

Hello. The seal should be available online. Unfortunately the metal retainer is not easily accessible. You might be able to reach out to a local dealer that might be able to sell you the seal with the retainer.

@JimMeyer-jf5jt Год назад

Thanks for the video and for the link to the weather seal. Do you have a part number or link for the retainer? I can't seem to find this part, and Wayne Dalton Support/Customer service is very poor and no help at all. My retainer is all rusted out and if I have to replace this door, I won't be going back to a WD product.

@sosgds Год назад

Hello! Thanks for reaching out. This is such a challenge. Mainly because Wayne Dalton should be able to offer this product to their customers. What city/state are you located?

@JimMeyer-jf5jt 11 месяцев назад

@@sosgds Hi, I am in Palatine, Illinois.

@walishakoor7765 8 месяцев назад

Where can I buy a new retainer?

@sosgds 8 месяцев назад

Depending where you live, Wayne Dalton sells it from their distribution centers.

@basketballjones6782 7 месяцев назад

"self-tapping" ≠ "self-drilling"

@user-hi6uh1of7p Год назад

How do I buy a bottom retainer

@sosgds Год назад

Hello. Does Wayne Dalton sell parts in your local area?

@mysongs2817 8 месяцев назад

He likes to hear himself talk

@marylouluukko9519 Год назад

So, in other words you need to purchase the entire metal Wayne Dalton bottom garage door seal that already has the rubber gasket in it due to the crimped threading channels on the metal bracket. One of the two channels does not have a crimp in it and the replacement gasket slides on easily. The problem is the crimped channel that will not allow the gasket to pass more than an inch. This is extremely frustrating and I have been searching on line for a solution. Shoving a screwdriver into the channel as was suggested in another video does not work. Your solution to avoid the threading headache was to purchase a brand new metal Wayne Dalton channel at a more expensive cost than the $20 gasket? Is this the only solution???

@sosgds Год назад

Hello. Yes there is a solution. You can use a drill bit to flatten the crimped portion of the retainer. Just be very careful not to puncture thru the door.

@1simple Год назад

@@sosgds I'm dealing with this now. Are you saying to use the drill bit to carve out the metal that's inside the channel, like finding the bit that is the size of the channel and carving it out so there is no more crimped metal. Or are you saying to drill a hole in the crimped part? Once you get the new one on, how do you secure it so it doesn't slide around, since you don't want to crimp the metal like it was done originally?

@sosgds Год назад

@@1simple Hello. What I use is a thin circular file to grind out as best as possible the crimp in the retainer. With a needle file and 18 volt drill I just work through the crimp till it's smooth as possible. Here's a link of what that needle file you can use: amzn.to/3Dc0WKm To secure the bottom seal I simply tuck in the excess at the ends and it should stay put for a long time. Hope this helps.

@1simple Год назад

@@sosgds Thanks. Before you commented, I tried a drill metal capable bit, one that would easily fit into the non crimped channel and that worked great! Just an FYI.