How to Replace a Wheel Cylinder

Подписаться 10 млн

Просмотров 1,5 млн

50% 1

Fixing Leaking Brake Wheel Cylinders. The wheel brake cylinder is vital to your drums braking capability. In this video I show you the process of replacing the drum brake wheel cylinder. It is easy to do and anyone can do it. It takes about an hour if you take your time.
Find inexpensive replacement wheel cylinders here: www.amazon.com/s/?_encoding=UT...
To learn how to change your drum shoes (remove the springs to get to the wheel cylinder): • How to Change Drum Bra...
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday*
-Website: www.ChrisFixed.com
-Facebook: / chrisfix8
-Twitter: / chrisfixed
-Instagram: / chrisfixit
-Subscribe Here: ru-vid.com_c...
-RU-vid Channel: / chrisfix
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Авто/Мото

Опубликовано:

8 июл 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@nicholassayegh9341 3 года назад

Let it be known that this was the first video Chris started off with "hey guys" 7 years of great quality content, you are an inspiration

@chrisfix 3 года назад

Thanks a lot!

@PH-md8xp Год назад

That is historical. Great video.

@elgabe8444 Год назад

So cute

@factsnfeatures 11 месяцев назад

How long did you spend figuring that out?

@Novagunner 4 года назад

Chris fix, made this 7 years ago and it's still helping people like me everyday! Thanks for all your work Chris! Hope you're well!

@patrickhall6831 2 года назад

Absolutely once it gets warmer I plan on replacing the drum brakes and wheel cylinders on my 2004 Ford Taurus 219,000 miles on them puppies !!!!!!

@jameseley5928 2 года назад

Yb@@patrickhall6831 m

@ScotLijana 8 дней назад

10 years ago he made this video and it’s helping me today. I am grateful you’re channel exists and I’m happy I found this video.

@chrisfix 8 дней назад

I'm glad the video is still helping you today! Thanks a lot!

@hnkfsh81 8 лет назад

I replaced both brake wheel cylinders on my daughter's Saturn recently based on your instruction. Saved some real money. Thanks!

@chrisfix 8 лет назад

+hnkfsh81 Awesome! Glad the videos were helpful and you saved some money!

@billydarley6925 8 лет назад

+ChrisFix love your method for bleeding brakes. hope that white shirt wasn't one of your favorites lol

@briantarajkowski7830 7 лет назад

@VinayakGovande 2 года назад

how much do they charge? Thanks

@FSUOSU25 2 года назад

@@VinayakGovande if u don't mind me answering they were going to charge me $230.00 to change both rear cylinders on my vehicle.

@chrisfix 11 лет назад

Thanks man! And thanks for checking out the video! It is good to get feedback from people who know what they are doing (as well as people who dont). There will be more to come!

@businessraptor127 Год назад

9 years later this is still coming in handy. My gfs car has drums and my new dd has them too. I ve done the drums shoes and springs before but never the cylinder. This takes out the guess work. Thanks again

@chrisfix 10 лет назад

Hahah thanks a lot. It was funny how many mess-ups I saw while I was editing so I had to add them for some fun lol! Glad you liked the video!

@idontknowanything2378 4 года назад

This is your first "hey guys" intro

@zanethulsie9702 2 года назад

Can you please show a video on how to replace a brake master cylinder please chris

@dannyb4283 Месяц назад

10 videos later and once again I should have just checked your videos first. Thank you so much for this. All the little tips and details as well, not just the overall replacement.

@TimothyMichaels 6 лет назад

Chris Fix = The official Chilton Repair Manual replacement. *Thanks Chris 👍

@RelateGREAT 9 лет назад

Great example how a DIY vid should be done! Well-edited, clearly explained each step, nothing rushed, well-shot. Thank you!

@chrisfix 9 лет назад

Jonathan Sherman Thanks a lot Jonathan. I try to make all of my videos like this!

@jerryw2314 7 лет назад

Its been 40 years or so that I changed out a wheel cylinder. Thanks for the refresher Chris. Great Videos.

@chrisshuler100 Год назад

the "Hey guys!" has gotten so happier and brighter over the years since the first one here. its absolutely awesome to see how far youve came

@1AAuto 10 лет назад

Nice job on this video.

@gode2235 2 года назад

I'm working on my first car I got a month ago. Needed this video and some others. 8 years old and still very helpful thank you.

@Louis907 3 года назад

Watching Chris's videos more than 5 years ago is like going into a completely different RU-vid channel

@chrisfix 3 года назад

Yeah the videos were pretty different back then!

@chrisfix 10 лет назад

Thanks for the feedback! Makes making these videos worth it!

@chrisfix 10 лет назад

Thanks a lot! It's great to get feedback from such a successful company!

@vincenteflores8197 5 лет назад

Hey love your videos. can u do a videos how to change brake master cylinder & do u have to bleed the brake when doing this. Thank you love your love videos keep up the good work.

@cerial0411 8 лет назад

Great job on this . Thank you for the outtakes. Shows just how much added time and frustration goes into making one of these videos. Subscribed.

@chrisfix 8 лет назад

+cerial0411 Thanks and awesome! Welcome aboard!

@kethvelo 5 лет назад

I did this years ago , and probably the next 2 days, your direction refreshes my approach, thank You

@chrisfix 5 лет назад

Glad the video was helpful!

@hazeleyesish 5 лет назад

I appreciate learning this from you about it. I am a 55 yrs old deaf man who has the desire know how it work and how to do it properly. Thanks !

@chrisfix 11 лет назад

Thanks for the comment! I am glad I am able to teach so many people!!!! :)

@StephenPaulTroup 8 лет назад

Good video. Especially high marks for nice, stable, clear, close-up views. That is so helpful for us guys that don't do this every day.

@chrisfix 10 лет назад

Thanks for the comment and tips. As for the paper towels instead of the plastic bag; I prefer the plastic bag because the towel can become saturated and get onto your metal/paint.

@waynetanner1749 4 года назад

I’ve been watching Chris Fix vids for several years and this is the first time I have seen bloopers at the end. LMAO it was great. Compliments on the clear step-by-step explanation with tips and tricks along the way. Like how the progression of vids where you get more and more lively, enthusiastic, and entertaining over the years! You have saved me a fortune on car repairs already! Grazie

@doughacker8941 2 года назад

Love the bloopers at the end of the video. That shows that making these videos is a little harder than people think and how hard Chris works for a great final product. You deserve all your fame and fortune my friend.

@dremoneystacks2421 5 лет назад

Great mechanic and appreciate the bloops so we know ur not a robot. Anybody can do it.

@johndaly846 9 лет назад

Flare nut wrench, bro! They are crazy expensive but rounding one of those nuts on the brake line is "Game Over". I watch your videos even before I do maintenance work I've done 10 times before- your tips and tricks make me do it better every time. Cheers again, Chris!

@am529 9 лет назад

John Daly I wouldn't call $6 "crazy expensive". That's how much singles cost at my local auto parts stores.

@johndaly846 9 лет назад

When you have to buy a whole set of them- yes, they are expensive. Crazy expensive, even.

@1995dresser 8 лет назад

+John Daly Your right flare nut or line wrenches are the way to go . home depot used to have them I think they were $30 ??? I would rather pay 30 bucks than have 300 dollars of aggravation

@ScubaCat3 8 лет назад

+John Daly It's like $9 for the set at harbor freight.

@ScubaCat3 8 лет назад

+John Daly I paid $9 for the set at harbor freight. At 7/16, he can probably get by without it, but it's still risky. The first time you round off one of those, you'll be hating life. Don't ask me how I know.

@dianalopez-rodriguez8105 9 лет назад

I've been waiting weeks for someone to change the brake cylinder for my Pt Cruiser, after 2 months I come across this video and feel like you've explained it well enough for me to try it myself. Thanks for making such an excellent step by step video!!

@chrisfix 9 лет назад

Diana Lopez-Rodriguez Awesome! I am glad the video was helpful Diana! If you have any questions, feel free to ask! Get some penetrating fluid on that bolt that connects the brake line to the wheel cylinder so it comes off easily.

@jessewamberg4060 3 года назад

I’ve watched all your recent videos and now I had to go back for this. Glad you made it

@chrisfix 11 лет назад

Thanks man! Much appreciated! And if you ever need to fix something you know what to watch!

@RyanTaylor2 9 лет назад

Great video, I appreciate you telling us what to do if the brake line is rusted to the nut.

@AUDIO2AUTO 3 года назад

I know you would have used a line wrench these days... lol But you been here since the beginning giving up the good info. Changing the world 1 video at a time. Thats what the internet was made for.

@shojay9270 2 года назад

Thank you for this video. My car did the exact same thing that your truck did. When I pressed the brake pedal it started squirting and I tightened it. My brakes feel much better now. Cheers!

@lucianonarno1408 7 лет назад

Dont breed the brakes! What are you gonna do with all of them when they grow up, Chris?! LOL, loved the bloopers.

@chrisfix 7 лет назад

+Luciano Narno lol

@jafarcopeland 7 лет назад

ChrisFix did it have a washer?

@les3316 5 лет назад

It's breed the blakes

@aryndracule6776 5 лет назад

Just goes to show how much work and dedication and detail Chris puts into each of his videos.

@elvamp789 8 лет назад

Just wanted to say how much I appreciate your work. 2 months ago I started getting interested in car mechanics and I couldn't have a better instructor. Are you planning to do some ''theory for beginners'' videos too in the future? For example a video explaining how the coolant system works or the brake system. You cover it sometimes in your videos but doing one video of ''basics'' for each section would be awesome. I'm saying this because - for instance - as a beginner I had to watch a lot of your videos (and other videos) to fully understand what you're doing in this video and not just apply it. Thanks again and after spending several hours watching cars' ''how to'' videos on youtube I can tell that you're the best. Keep it up!!

@ralphstone1521 5 лет назад

You are an excellent teacher! I don't know jack, but you really speak slowly, and thoroughly give details (wrench sizes, front & back views, etc.) Thanks!

@stevengriffin9782 8 лет назад

I am a seasonal Mechanic. I wwas looking for something else but took the time to watch your talentes. I loved the entire how to video, because there are people who watch and don't realize you said CUT do it again .

@chrisfix 8 лет назад

+Steven Griffin thanks!

@ivanlopez9059 9 лет назад

Awesome videos. So simple to follow and love the tips that are not included in books. I've changed my rear and front brakes with no issues. My car is pretty rusted so all those tips helped out. Thank you so much Chris, you've saved me a lot of money! I don't know if you realize how great of a public service your videos are but they definitely are! Keep up the great work!

@chrisfix 9 лет назад

Ivan Lopez Awesome Ivan!! That is what I like to hear! Good work and I am glad my videos have helped!

@tombombadil811 4 года назад

Old chrisfix: Hey guys. New chrisfix: HEY GUYS CHRISFIX HERE!

@chrisfix 4 года назад

Haha I wasn't as excited to film back then as I was now!

@keithmerryman4402 4 года назад

Thanks for all your videos. We can count on good lighting, detailed instructions, and a variety of subject matter! Good to see your human by showing us a few outtakes!

@josephbragg1162 Год назад

I absolutely love the whole outro bloopers so you can breed the Blake's and a brake renovation. 😆 😂 Great video Chris.👍💯

@fastedbro9911 8 лет назад

You're the best on RU-vid. I laughed my ass off at your bloopers at the end 😂😂

@chrisfix 8 лет назад

Haha thanks a lot!

@80shorrorronniepierce67 8 лет назад

+ChrisFix I've got a Mazda protege would it be pretty much the same? if you even see this comment thanks

@matt6965 9 лет назад

Thanks for the video! I got real insight on what it takes to breed the blakes.

@scotfree45 10 лет назад

I've watched several youtube videos on auto maintenance and repairs, and yours are the best by far, you are an excellent instructor. Thanks for making them.

@chrisfix 10 лет назад

Thank you for the feedback! I am glad you are enjoying my videos and I strive to make them the best!

@danielhannah3437 6 лет назад

I just got to say even though most of your vehicles you're working is a ford. All my ate chevys but you go through so much detail I learn more from you then people with the same vehicle as mine.. thank you so much for taking the time to fully explain and show everything

@brettknoss486 7 лет назад

If I'm worried about cross threading, I turn the nut backwards with my fingers, until I can feel it seat. Then tighten with fingers, and don't put a wrench on it until your certain the nut is on.

@chrisfix 7 лет назад

Great tip!

@faheemraqib1035 7 лет назад

That's what I do too.

@2tommyrad 9 лет назад

The bloopers were a crack up! Reminds us that no matter who is working on a vehicle, it's almost never a smooth operation.

@chrisfix 9 лет назад

Tommy Rad Haha, glad you liked it! Yea, I forget English when I film lol. Probably too many things to think about.

@snspc8381 8 лет назад

+Tommy Rad Brake bloopers lol. I give Chris credit, I would be a lot worse. I can explain things well if there is no camera around me but as soon as I know I am being filmed, my lips turn into rubber fish and can't say anything right.

@2tommyrad 8 лет назад

SnS PC LOL, I know exactly what you mean. I studied Jazz comp/improv for years, in the privacy of my bedroom, playing with my dad on sax. I was asked to do a gig and was excited about it. I got on stage and completely forgot everything! EVERYTHING. To the point where, if someone asked me what was hanging on my neck [guitar] I would have looked at them as if they were speaking Martian slang. I laugh now but it was pretty traumatic at the time. Total choke! LOL

@brianbarnes350 3 года назад

Loved the bloopers at the end. Thanks for doing all of the hard work of recording and editing so that you can help us know what to do. THANK YOU!

@stormycoenen4855 Год назад

Thank you so much for your help. I rebuilt my brakes on my 91 gmc suburban R2500 and it was so helpful my problem was there was so much rust built up on it it took me a week to break it loose and no power tools snapped a lug bolt in the process but achievement unlocked lol really loved your video and loved how straightforward it was 😄😁

@chrisfix 11 лет назад

You should change and bleed each side once at a time. This will prevent excess air from getting into you lines and also if you need to reference where something goes, you can look at the other side.

@Chris-go9ti 8 лет назад

love the bloopers . its like you forgot how to do it and had to pause to go to youtube to look it up. lol

@chrisfix 8 лет назад

+chris smith hahaha

@jeffbenak1054 9 лет назад

Hey again chris . Just a quick note to pass along to everyone based on what happened to me today when I was changing out the brake cylinders on my son's 93 accord. The compression fitting was rusted to the brake line like you mentioned could happen so I took the cylinder off with a small section of brake line attached. The fitting and the brake line were completely rusted together and I couldn't break them apart.I took a "bernzomatic" torch I got a few years ago at home depot and heated the fitting and after about 10 seconds I was able to break the compression fitting free from the break line. Had to do the same on both sides and it worked like magic both times. Thanks again chris . hope this helps someone.

@chrisfix 9 лет назад

***** Thanks for sharing Jeff! I am sure this will help a lot of people!

@RajeshSingh-rt4rx 2 месяца назад

The extra bonus at the end was pure gold.

@chrisfix 10 лет назад

No prob! Glad it was helpful!

@codyq0987 10 лет назад

Hi Chrix, Thank you for this excellent video. I really appreciate the great details you show in the videos.

@chrisfix 10 лет назад

No problem! Glad the videos are helpful!

@Claasic 2 года назад

Wow the difference in videos till now is crazy. Thank you for helping me throughout the years

@CharlesLuciano-xl2rn 7 лет назад

Thank you so much. You made this very eazy to do. I loved that you used terminology that anyone could understand. Once again thank you. Great job!!!

@everythingismediocre 9 лет назад

Great! Good camera work too, very clear. Thanks man!

@chrisfix 9 лет назад

Ryan Lynch Thanks Ryan. Glad the video was helpful! Definitely consider subscribing! New automotive 'how to' videos every Thursday and most Mondays so stay tuned!

@whatupguy5685 7 лет назад

one of the best feelings when a bolt go's in all the way when u finger tight

@mindyjh271 9 лет назад

Ive got to say ive watched ALOTof videos on car repair and he has the BEST ive seen so far, the videos are clear and precise... really cater to the do it your selfer like myself.... he has the camera close enough to what he is doing so u really understand the process... PROPS TO HIM..... all the other videos ive watched are so far away that u cant really understand what they are doing.... THANK U SO MUCH, anything else i have to do regusrding my cars i will be watching him for tips.....i subscribed to his videos, ive never bothered to subscribe to anyone before, let alone comment on anything....so that is saying something for this guy.....Im looking forward to watching future videos, i just bought a 1995 chevy lumina as a 2nd car and im in the process of trying to get it road worthy, this video helped me immensely...thank u

@chrisfix 9 лет назад

Mindy Hull Thanks a lot Mindy! I am glad my videos are helpful and you like them! Glad you subbed as well!

@immortalirish3852 8 лет назад

These videos are saving my life lol I just recently got a 1985 Lincoln town car and I know nothing about cars and these videos are helping me work on it myself

@chrisfix 8 лет назад

I am glad the videos are helpful!

@Mrdevs96 9 лет назад

Thanks Chris! Do-it-yourself'ers unite!

@Mrdevs96 9 лет назад

Wasn't to bad ! I didn't even curse once :D

@chrisfix 9 лет назад

Travis Devereux haha, I like how that is how you tell how bad the job is!

@michaelwilliams6261 7 лет назад

lmao the bloopers was halarious

@KF1 2 года назад

I like these older videos just as much. I was about to jump for the volume before you started yelling HEY GUYYYyYsSS! love the newer enthusiasm, though I gotta watch my speakers before I click

@paulhenry5174 2 года назад

This video will come in very handy this Saturday. Have to change my cyclinder out on my 2005 Scion XB. THANK YOU very much

@chrisfix 10 лет назад

Haha thanks a lot! Glad it was helpful! I guess I wont have to use my toaster to film in the future videos lol. If you havent, give the video a thumbs up, it helps me out! Thanks!

@mindyjh271 9 лет назад

BLOOPERS WERE AWESOME TOO!!!!!

@chrisfix 9 лет назад

Mindy Hull haha, glad you liked them too!

@Ofvandelayindustries 7 лет назад

my car has 415, 000 miles on it. I have been doing all the work to save moolah cause well, less is more at this point. Chris has enabled me to continue saving money and rocking more miles. I fucking love you man. I also appreciate how clean he is, cause if I'm going to be digging around the mechanics of my car, I may as well keep it clean. well done. you've done this world a great service!

@Leability 6 лет назад

I watched your video on how to changed drum brakes and was able to change mine! I made a mistake by not replacing the cylinders though, and now they are leaking. So I'm gonna use this video tomorrow to change those. Thank you! Your tutorials make everything so easy.

@allenhenry1113 7 лет назад

lol like the bloopers!! lol

@chrisfix 7 лет назад

+allen Henry lol thanks!

@Greenbearls 7 лет назад

"Brake renovation"??? That was too funny.

@eduardoserranolopez4313 6 лет назад

eres tu primo

@venividivici4253 3 года назад

Look at that driveway real estate! I wish I had a driveway that size. Keep up the great work man. My car has drum brakes too.

@alrowley1 9 лет назад

Your video helped me out quite a bit man. I just got done gutting and rebuilding rear drums.

@bottmar1 9 лет назад

If you prop brake pedal down just an inch or two you will not get much brake fluid gravity feeding down to your open line.

@chrisfix 9 лет назад

bottmar1 That is a good tip! Thanks!

@Kiddro22 9 лет назад

NEVER USE A REGULAR WRENCH OR OPEN END METRIC/SAE WRENCH ON THE BRAKE LINE BOLT CAUSE THE BRAKE LINE BOLT WILL ROUND ON U VERY EASILY. THEN YOU'RE IN A WORLD OF HURT. USE A LINE WRENCH....THATS WHAT THEYRE CALLED.....THEYRE MEANT TO FIT AROUND A LINE BOLTS LIKE THE BRAKE LINE BOLT SO THAT U DONT ROUND IT OUT BY STRIPPING IT

@chrisfix 9 лет назад

Kiddro22 Thanks for the tip!

@jakesmelley6852 5 лет назад

Flare nut not a bolt

@SkipWiley911 7 лет назад

I've watched a lot of how-to videos one various subjects. This has got to be one, if not THE best I've ever seen. Thank you very much.

@droose5158 22 дня назад

This is a very informative video the bloopers are hillarious

@curierfromxibalba1155 9 лет назад

I think you should use gloves...

@x-man5056 6 лет назад

Nitrle gloves to keep brake fluid off your hands. Brake fluid will remove paint so not so good for your skin. Use a funnel to fill master cyl also. Don't start a circus act trying to pour brake fluid into master cyl w/o funnel. Eventually, it will make you sorry when it's too late.

@omarfarooq5828 9 месяцев назад

Chris makes the best videos! To the point, accurate and perfectly paced.

@aexwor1 7 лет назад

did a full rear brake overhaul today, all the parts came to £150 and learnt how to do it from these videos. everything was going fine until i got to taking off the cylinder... managed to brake 3 tourque keys trying to remove the retaining bolt, ended up having to remove the shock absorber to drill the bolt head, we then had to cannibalise bolts from a bicycle to fit the new ones. after that all happened, the nut around the brake line got wrecked and had to file it back down to 10mm this was meant to be the simple bit bit took hours =[ cheers for the videos!

@SaltyHonkey 9 лет назад

Yesterday both my back wheel cylinders on my ranger i only had front breaks it was raining and caused a little accident, but now after limping home i go strait to your channel and as always, you have what i need :)

@chrisfix 9 лет назад

***** Sorry to hear that but I am glad my video will be able to help you!

@johngarroch 7 лет назад

Clearly you know what you are doing mechanically. Your videos are better than any training videos I have watched to learn my trade in working on fast jet aircraft. These are good enough to market. Thank you

@chrisfix 7 лет назад

+John Garroch thanks a lot John!

@braedonk5443 Месяц назад

You have a vid for every problem I could have w my car, thanks man. And u should bring back the cut action bloops

@chrisfix Месяц назад

Thanks a lot! And that would make every video 50 hours haha

@yanglu9555 5 лет назад

Thanks Chris. Your instructions are very informative and hopefully I can save some serious money! I have to replace both rear wheel cylinders, brake hose line, and brake master cylinder. So I will let you know on the outcome.

@RoryMolePublishing 2 года назад

Hi there Chris, Yesterday I changed the wheel cylinders on my wife's Hyundai Atos after watching other guys videos. I'm sorry that I didn't see this one of yours. The procedure was pretty much the same as yours, but your video is much better with much clearer steps. Thank you so much for all the help that you have shared with us. I've watched quite a few of your videos and also changed out my front rotors and brake pads on my Nissan Tiida last year. Keep up the videos, they are a great help. Kind regards to you.

@armandoar891 3 года назад

Thank you for the effort you put in to this video Chris. I liked the bloopers too lol.

@SuperZrob 7 лет назад

Awesome video. Very informative. You make it look so easy. I still feel like I'm going to break something and be in worse shape than before. Someday I'll face my fears and just do it.

@fuxbox 4 года назад

Haha the bloopers were really funny. You always make and explain everything seem so easy. Good to see you're actually human. Thanks for teaching me to renovate my brakes 😂

@imnotdavidxnsx Год назад

A calm and gloveless Chris Fix before his ultimate evolution

@manueltrujillo1282 8 лет назад

well now I wish all your videos had bloopers. excellent job Chris thanks.

@chrisfix 8 лет назад

+Manuel Trujillo Haha, I will be doing a blooper video dont worry!

@MrMusicDreamz 7 лет назад

Thanks to you tube and guys like you Chris, I saved money and a lot of aggravation with waiting on a mechanic! And thank you so much for showing us how to bleed our new wheel cylinder! I hit a problem with my master cylinder going dry. I have 2 compartments to mine. One is for the front and the other is for the rear. Well I assumed the bigger rear cylinder was for the rear wheels so that is what I monitored. ! Wrong! lol The front one which holds very little fluid actually controls my rear wheels! So your tips on bleeding was a God sent! Because at first, I had no brakes and the light was on my panel. But now, it's all good thanks to your video! :) Here is a tip. If your master cylinder has two areas, better watch both of them to start going down on fluid level!

@thehighriseconstructionob9679 Год назад

Thank you showing last redo part , that was really best , so I know I can make mistake and just redo again till get right and not pressure no failers if I fix what failed , that really help me out , you making me realize if I failed just corrected instead of condemning and dipress my self to cripple, thank you really last editing part sir. That was so nice so human and so helpful, wow you are real kind hard working man thank you sir.

@Mr.G_Rattlesnake 8 лет назад

Absolutely amazing! Bloopers are always a sure sign that everything went well in the end. Great video! I already know how to do this job. But! There were alot of nice tips and ticks involved that I'll take into consideration next time I'm doig this work! Thanks alot. I really do appreciate it!

@jonathaniaquinto1001 6 лет назад

ChrisFix, Your videos are excellent. Thank you for the detailed descriptions, the what, why, how and when.

@paulklekot8774 4 года назад

Great job. After watching your video, I plan to replace my own leaking wheel cylinder. Thank you so much.

@chrisfix 4 года назад

Thanks a lot! Let me know how it goes!

@bobbynelson2481 10 месяцев назад

Great job you have learned very well wish more young people would learn this according to this video you are a teacher

@timothyernest1780 Год назад

An oldie but a goodie! Who needs netflix when I could watch these all day

@SikConVicTioN 4 года назад

Crazy this video has million views and only 10k likes.. this is one of if not the best wheel cylinder video on RU-vid...

@marks146 11 лет назад

Great job on the video. Your videos are getting a very professional tone. I've changed many brakes over the years, so I didn't see anything new. But because I found your video entertaining, I watched the whole thing. You're on a roll. Keep it going!!! I look forward to your next.

@M.Rollins92 7 лет назад

Thank you for this, i flushed my brake fluid hoping to fix the spongy pedal which it didn't. Then my friend suggested replacing the wheel cylinders happy to hear how easy it is.

@FireEater 10 лет назад

I have to say that was one of the best how to videos on auto repair I have ever seen, the camera shots were spot on and we'll lit. Just subscribed thanks.

@chrisfix 10 лет назад

Thanks a lot man! I try to make all my videos like this!