How to Replace and Adjust Headlights on a 93-97 Ford Ranger

Подписаться 8 тыс.

Просмотров 38 тыс.

50% 1

The euro style headlight lenses I installed on my truck were junk! So I went back to an OEM style replacement I found on Amazon
______________________________
PROJECT PARTS AND TOOLS
Evan-Fischer Headlight Set Compatible with 1993-1997 Ford Ranger Left Driver and Right Passenger Side Halogen With bulb(s) amzn.to/39WILKk
BEAMTECH 9007 10000 Lumens LED Bulb amzn.to/2V817nT
Craftsman Box End Wrench amzn.to/3oodloE
11mm Ratchet Wrench for Corner Lens amzn.to/3zVrn37
Rubber Mallet amzn.to/3uwU3hK
Punch amzn.to/3B0koYh
Magnetized Bowl amzn.to/3mfO9Ot
______________________________
CONNECT WITH ME
Instagram: @rayregno @rayregnogarage
For Business Inquiries ONLY: rayregno@gmail.com
______________________________
FTC LEGAL DISCLAIMER
Some links found in the description box of my videos may be affiliate links. This means that when you purchase products or services using these links, I will make a commission on these sales. This is free for you and is one way to support the channel so that I can keep buying more parts and tools and make more videos! Thanks in advance for your support!
______________________________
LIABILITY DISCLAIMER
Please use the information in this video at your own risk. Neither Ray Regno nor Stronghold Garage will be held responsible for any damages, injury, or loss that could arise from using any information in this video.
______________________________
#fordranger #headlights #aimingheadlights

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@bodhiench 2 года назад

A quick FYI - you can adjust the headlights with a 4mm socket without removing anything - those bolts that stick out where you installed the clips will accept the socket from behind the lens assembly. The lower one adjusts the up and down, the upper one closest to the grill adjusts the left/right. Wish I would have watched your video before I installed my headlights - I just bought and installed the same headlights you replaced in this video.

@rayregnogarage 2 года назад

Thanks for the tip on the up and down part. I'll give that a try.

@teytch2998 3 года назад

I have a 96 4L 4x4. All of these videos are so much help. Much appreciated!! 🙏

@rayregnogarage 3 года назад

Glad you find them helpful!!

@teytch2998 3 года назад

@@rayregnogarage if only the border would open up! Your probably just a hop, skip and jump away from British Columbia eh?? 🇨🇦

@rayregnogarage 3 года назад

Yup. not too far.

@Thizlamic 3 года назад

BRO I just replaced my lenses last week lol. AM I THE ONLY PERSON WHO HATES THOSE RETAINING CLIPS OMG! lol

@rayregnogarage 3 года назад

Lol. I don't mind them. I think they're fun.

@mikegeiger6420 3 года назад

LED bulbs suck in older headlights like the rangers. Unfortunate, but nothing can be done with them unless custom lights are made.

@rayregnogarage 3 года назад

Ya. the reflectors don’t do well with LEDs. I’m actually thinking about going back to one of those super bright halogens.

@fishboy3179 Год назад

how to actually do it; level ground, pull up to a wall. mark the physical location of the capsule center with tape on the wall, back up twenty feet and adjust the beams to hit the tape marks. adjust the beams to the median light cast of the high beam and low beam. something to note is you will usually not get perfectly symmetrical results because the capsules are designed to prevent blinding oncoming drivers. this method gets your lights really really close but you gotta be on level ground , mark true center, and back up straight.. you can fine tune if desired.

@TononiaWorld Год назад

The beam should point in 100 m to the ground in the car's center. in other words, your lights are too far down and still crossed eye. To correct move to a wall, mark the bottom and the outside of both headlights, back up 33 feet (10 meters), and aim your headlights to be 3 inches below the level of your headlight center. and 1 to the middle. this will focus both low beams to have no gap in the middle and a wide field of view (and not flashing other drivers) and the high beam to have a hot spot in the center.

@newscoulomb3705 2 года назад

10:20 Is the blotchy beam pattern a result of the stock headlight? You said your Xterra is using the same LEDs without the blotchiness?

@rayregnogarage 2 года назад

Yes i think it’s the inside structure of the factory headlight. There’s pieces in there that cast shadows.

@newscoulomb3705 2 года назад

@@rayregnogarage Thanks! I think I have similar LEDs (Sea Light), so I'll see how they work out in the stock 1999 Ranger headlight.

@Supremebean303 Месяц назад

Got an 03 ranger XLT. Is it worth getting LED bulbs with OEM housing? I was thinking of doing sea light or Sylvania.

@Yamommasblubber 3 месяца назад

I have a 98 and can’t figure out how to get those screws adjusted on the aftermarket lens I bought

@user-yz1fb8jf5w Месяц назад

I bought those same headlight assemblies and the beam pattern was blotchy from the start and less than two years later the lens cover is coming apart from the housing. Also the reflective coating is peeling off.

@rayregnogarage Месяц назад

the euro ones? ya they suck

@rudimurga7034 3 года назад

Welcome back to so-Cal

@briansemenoff3195 Год назад

Take the grill off, and you can adjust all three from above .

@creative_expressionproductions 2 года назад

😂😂😂bro...6 screws with a power tool is about 10 seconds of work...how long did you faf with the headlight and the cornerlight because #lazy? 😂😂

@MarkT.63 3 года назад

!!! Nice video. What LED bulbs are you using?

@rayregnogarage 3 года назад

I originally had Beamtech in both my Ranger and in my Xterra. Same Size. But I am trying out the Auxito bulb in my Xterra right now. I've done video reviews on them. Here are links to both. BEAMTECH 9007 10000 Lumens LED Bulb amzn.to/2V817nT AUXITO 9007 12000 Lumens LED Bulb Use "strongholdgarage" coupon code to get 10% off! auxito.com/collections/9007-hb5-led-high-low-beam-forward-lighting-12000lm-per-set-6500k-xenon-white-wireless-high-low-beam/products/9007-hb5-led-high-low-beam-forward-lighting?rq=yr_2008~mk_Nissan~md_Xterra~tm_Standard%20Trims~ml_High%20Beam%20and%20Low%20Beam

@31beatseeker Год назад

The AUXITO led's are fantastic replacements. I have some in my silverado and now in my camry. Thanks for the helpful video, our only issue with getting the grill off is we have a brush guard in the way =/ But the 4mm socket sounds like the way to go

@kamraceclardy6777 3 года назад

Omg you’re back to your 95 build!!

@rayregnogarage 3 года назад

Ya. I’m super backed up on the video editing. I have stuff I did months ago that I haven’t edited or posted. But I’m gonna try at least one Ranger video per month moving forward.

@bravo3601 3 года назад

Thanks am probably going to buy my dads ranger same one as yours Manuel 4x4 and same color

@rayregnogarage 3 года назад

nice!

@chrismehle5716 2 года назад

Hey. Are these lense better then the other ones, in your other video? I’m looking to get new ones and more brighter lights

@rayregnogarage 2 года назад

Performance wise, it wasn’t a huge difference. The euro style ones were already rusting though and I didn’t like that. I also don’t have the weird shadows with the OEM style that the euro ones had. I like the OEM better

@carll.freemanjr.9867 2 года назад

Ey..I dunno why you took the clips back out, with the grille off there shoulda been a Phillips head screw to adjust the side to side on the headlight beam...

@rayregnogarage 2 года назад

That’s what I ended up doing.

@WilliamWright-js7kg 10 месяцев назад

I have the same problem. For LED lamps , Does orientation of lamp in housing affect beam ?

@mrskeleton53c85 2 года назад

I think he stole my truck

@newscoulomb3705 2 года назад

3:52 This might not be an issue in cooler climates, but I'm worried about the heatsink on my LED being completely enclosed by the lock ring. I think I'm going to shorten mine, or buy low-profile lock rings that leave the LED heatsink exposed.

@rayregnogarage 2 года назад

Ya, I like the exposed heat sink better. Not sure on the longevity of the lights, I don’t drive at night very much with this truck.

@christophermorejon9693 Год назад

Anyone know if its possible to open the lens?

@rayregnogarage Год назад

pretty sure it’s sealed

@BrianClaborn Год назад

What air intake setup are you running?

@rayregnogarage Год назад

it’s a cheap DIY setup from the previous owner. I just replaced the cheap cone filter with a K&N

@BrianClaborn Год назад

@@rayregnogarage I see, thanks for the reply!

@krustythecarhauler 2 года назад

With those big deep buckets should have done a projector retrofit

@rayregnogarage 2 года назад

Maybe in the future. I’m intentionally keeping everything on this build as budget friendly as possible. Found a good write up for the retrofit tho. www.therangerstation.com/forums/index.php?threads/how-to-93-97-true-projector-retrofit.141424/

@krustythecarhauler 2 года назад

I did my 2011 ranger with a retrofit kit I don’t think I got more than $ 70 in it and the light output is great

@rayregnogarage 2 года назад

@@krustythecarhauler Where did you get it?

@krustythecarhauler 2 года назад

I think it was Amazon and I’m using an hid kit with it I do believe they have them for leds to.

@krustythecarhauler 2 года назад

I tryd the leds in my Oem buckets the beam was scattered no matter witch way I adjusted them