How to Replace Brake Pads and Rotor Chevrolet Sonic 2009-2015

Подписаться 253 тыс.

Просмотров 35 тыс.

50% 1

Here is a video tutorial on how to do a brake job for a Chevrolet Sonic between the years of 2009-2015. This is something that nearly anyone could do and save a ton of money in the process.
How to jack up your vehicle safely: • How to Safely Jack and...
If you have a car question ask it completely free at www.2carpros.com/questions/new
*Disclaimer: Please use all safety precautions

Авто/Мото

Опубликовано:

29 июн 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@Stayhonest100 2 года назад

Thanks bros made $200 on the side today doing front breaks on a sonic. Good Channel .

@2carpros 2 года назад

Nice work! Thanks for watching!

@yankeechief2713 4 года назад

So pads and rotor video with no rotor removal? Also, second set of bolts are not 10mm but 18mm to remove brake pad bracket.

@danbaumhart1893 2 месяца назад

My guy. The rotor has one screw (if it hasn’t already been replaced) and then you literally just pull the rotor off. You knew to this whole car fixing thing ?

@yankeechief2713 2 месяца назад

Are you "knew" to this whole English thing?

@mr.bluegrass9723 6 лет назад

2003 Rubicon hydraulic clutch, how do you adjust it ?

@shawnmcdonald8258 Год назад

Helpful, and dare I say entertaining. Excellent presentation

@2carpros Год назад

Much appreciated!

@glennwallace9203 2 года назад

What size is the Torx bolt? What torque to use for caliper bracket bolts? No brake lube/paste on the pad tangs to slide clips?

@Breezzyybree 2 года назад

My caliper piston will not go back in when I used the C clamp. Do I need to open the brake fliud reservoir in order for the piston to be pushed back in?

@hawkeyesproductions1010 5 лет назад

What size tork wrench u use for to take the rotor off

@joserendon8278 6 месяцев назад

Thanks for sharing

@dennissecor8092 11 месяцев назад

Great video, I have , 2012 to do. Thank you for, sharing!!!

@2carpros 11 месяцев назад

You can do it!

@IFoundMyBrand 5 лет назад

Do you remove the brake fluid cap at any point? If so, when do you remove it and when do you put it back on. Should it be removed for the slow brake pedal priming technique you demonstrated?

@denizenofclownworld4853 Год назад

When pushing in the piston on the calipers. Bear in mind brake fluid is hydroscopic meaning it loves to absorb moisture. Don't leave the cap off for extended periods of time.

@ForvoQuizlet 5 лет назад

Torque settings?

@MasterEjaculator Год назад

both of them are 10 mm bolts? One is like 3 times the size of the other.

@bradfigiel2203 6 лет назад

Good video. Should of showed rotor removal. Sometimes they corrode to the hub. Take a hammer and give a couple good hits all the way around.

@denizenofclownworld4853 Год назад

'should have'

@JeffreyRutland Год назад

the one step I was waiting for! haha

@pj_trades3991 14 дней назад

Bro at least tell me what size the stupid torx bit is

@jamin8510 10 месяцев назад

What about the anti lock braking system?

@louganies 4 года назад

Hi I didn't see u remove the brake fluid cap off is it necessary ?

@luisvilla799 3 года назад

Na that's only when brakes lones are open and exposed to air

@blue04mx53 2 месяца назад

Why torx bolt ? Why? If the 5 lugs at 90 ft pds aren't going to hold the rotor on then I don't think the little torx bolt is going to do much ? Is this just a 'robotic' assembly thing?

@2carpros 2 месяца назад

You got it exactly! That's why it is there. Thanks for watching!

@franciscotineo.7092 2 года назад

those seconds bolts that are you removing are not 10mm right? you mention it in your video but a thing is more or less 15-16mm

@2carpros 2 года назад

I don't remember. Sorry. Thanks for watching!

@yankeechief2713 4 года назад

Also what about the torx screw on the rotor? Size t27? t30?

@googleusergp 4 года назад

It's a T-30.

@googleusergp 3 года назад

@Drew Bork My rotors were seized on when I tried to do a brake job. Fortunately, I have a special conditions warranty with GM so I made them eat the job. I normally would have done it myself. I did my Pontiac G6 brakes a few months after the Sonic and those slid right off. I had done the fronts earlier in 2013 or so, but the rears were original. Everything came off with no problems.

@davidbaron6647 Год назад

nice

@ilovesunoco 5 месяцев назад

Use brake clean spray cleaner on rotors before pad installation

@SlimeFrogSpeedPaints 2 года назад

Where'd you get the brakes

@2carpros 2 года назад

SummitRacing.com or RockAuto.com

@billharmon670 6 лет назад

Good video. It was a big help. But you didn't show how to remove the rotors. After removing the screw. I spent hours getting rusted on stuck rotors off the hubs. I have never had such a hard time getting rotors off. Usually a couple of shots with a big hammer does it. I had to use an air chisel to break them loose.

@2carpros 6 лет назад

These weren't hard to remove due to being a California car. I can't show something that isn't there. I do want to make a video on how to remove a stuck rotor or drum though. Thanks for watching!

@billharmon670 6 лет назад

I live in Massachusetts, This was on my car. 90000 miles on the original front brakes 2012 Sonic LT

@EricDIY 4 года назад

How hard can that bolt on the rotor be to remove? I know that on my Honda CR-V and my wife's Hyundai Elantra, I had to heat them up and hit them with an impact screwdriver for a while. I never put them back with the new rotors because they were not required and they were that hard to remove.