How To Replace Carburetor On 150Cc Scooter 

Thank you so much for the kind words! I'm thrilled to hear that you find the content clear and helpful. Your support means a lot, and I'll do my best to keep delivering the content you're looking for. If there's anything specific you'd like to see or any topics you'd like me to cover in future videos, feel free to let me know. Thanks again, and I appreciate your support!

Hello Scott Fantastic I'm very happy I was able to help you with your scooter now be safe and ride smart ah ah ah and thank you for watching my video

Hello my friend thank you for watching my video

Hello Paula thank you for watching my video I ' m very happy that I was able to help you

MY baja sc 150 it starts but when I turn it off and try to start it again it will not start again

What kind of movies? I've never heard of them. Besides.... I'd rather watch you!

Thank you for watching my videos

Thank you for watching my video

Hello my friend thank you for watching my video

Hello Ed thank you for watching my video

Hello Thomas thank you for watching my video

@@VirberelloScooterTips hey what does it mean when the scooter isn't getting any gas to the carburetor?

@@thomaskellem5315 Could be that the fuel valve is not opening because you have a leak on the vacuum lines or you have a dirty fuel filter or dirty fuel tank

Virberello? Why is my bike now just only putting gas just in the gas filter and not going through the pitcock and going to the carburetor.

Glad you like them!

Hello my friend that is great ideas I never pay attention to that I don’t think will make a difference but anything can help to keep the motor at lower temperature 👍

Some carburetor have a plug at the idle mixture screw but they work fine now if you miss a screw and you have a hole the carburetor is not going to work

Hello my friend thank you for watching my video and Happy Holidays

Thank you for watching my video

Hello my friend in Florida at sea level and hot weather with that set up I run a #125 main Jet but if your location is colder or little higher in altitude you could be ok running a #115 or #120 sometime is all about testing and tune to get the perfect performance

No but you give me a good idea

do you have any information about "throttle stop screw"? Where is located, any how do you adjust it? Or should need to adjust it at all? Thank you have a wonderful day my brother from a different mother. 21:15

Yes the newest carburetor they do not have the extra line but I don’t think It make to much different

Hello John thank you for watching my video

Yes the make a big difference in performance thank you for watching my video and Happy Holidays

Did you buy one? If so, what do you think? And what brand and what was the cost? Thank You!

@@kenroymusic Would that carb fit my 150cc Tao Tao Lancer scooter? And do you have to mess with jets and all that shit? I"m tired and worn out reading comments on Amazon about people buying new carbs and having problems with them and having to mess with jets! Thank You for any response, help or suggestions!

@@JQUICK21 I did not, but from my research i think that the closer the throttle body to the intake valve is, the better throttle response you will get, some carbs do this, but people usually mod the intake manifold

Well I don't have spark so no I'm following it back until I find it never mind it's a hunting game no answer can be for sure on I guess lol thanks anyway

Try to post your video on chinese project scooters group on Facebook I m in that group

Hello my friend you can test the wires that goes to the enricher with a multimeter if you do. Not get any voltage you could have a voltage problem or if you think that your enricher is bad just buy a new one or buy an manual conversion kit for 24 mm carburetor

Hello Robb thank you for watching my videos

@@VirberelloScooterTips bro, your videos working on your gy6 150cc scooter has helped me so much. You sir are a scooter god!

Hello TheDayDreamer start to change the weight rollers to a 14g , next rejet the carb, change the exhaust and a performance air filter but do one thing at the time because there is a possibility that you will not like what is your scooter will become after all the modifications. Thank you for watching my video and be safe

Hello my friend thank you for watching my video and for supporting my channel

Hello Zane try this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-csH2RGvXegI.html

Hello if you replace only the main jet I will not touch the screw if you replace both pilot/mainjet I with turn the screw only one quarter or less out and at the same time I will listen to the motor sound

Hello my friend yes it will work on your scooter Nibbi has a manual choke on the top you have to make sure you can pull the manual choke if you need it because it will be under your seat bucket . Thank you for watching my video

@@VirberelloScooterTips Your videos are seriously the best for gy6 scooters/mopeds. Keep em comin! Lol

the L is the fuel over flow

Démonter un carburateur de scooter, comme celui d'un Piaggio Xevo, est une tâche que beaucoup de gens peuvent accomplir avec un peu de patience et les bons outils. Cependant, il y a quelques considérations à garder à l'esprit. ### Ce dont vous aurez besoin : Pour commencer, vous aurez besoin d'outils de base tels qu'un jeu de tournevis (plats et cruciformes), une clé à douille, une clé à molette et des pinces. Avoir le manuel d'utilisateur ou le manuel de service est aussi très utile pour des instructions spécifiques et des diagrammes. ### Étapes générales : Tout d'abord, assurez-vous que le scooter est stable et sécurisé. Déconnectez la batterie pour éviter tout court-circuit et travaillez dans un endroit bien ventilé, car de l'essence peut être présente. Ensuite, retirez les panneaux et les caches nécessaires pour accéder au carburateur. Déconnectez les tuyaux d'essence, le câble d'accélérateur et le starter. Dévissez les fixations qui maintiennent le carburateur en place. Une fois le carburateur retiré, placez-le sur une surface propre et démontez les différentes parties telles que le flotteur, le gicleur et autres composants internes. Prenez des photos à chaque étape pour faciliter le remontage. Pour le nettoyage, utilisez un nettoyant pour carburateur pour éliminer les dépôts de saleté et les résidus. Assurez-vous que toutes les petites pièces et orifices sont propres. Le remontage se fait en suivant les étapes inverses du démontage. Assurez-vous que toutes les pièces sont bien ajustées et que rien n'est laissé de côté. Réinstallez le carburateur sur le scooter, reconnectez les tuyaux d'essence, le câble d'accélérateur et le starter, puis rebranchez la batterie. Testez ensuite le scooter pour vérifier que tout fonctionne correctement. ### Conseils supplémentaires : Soyez méthodique, prenez votre temps et ne forcez jamais une pièce. Notez les étapes, utilisez un marqueur ou des étiquettes pour identifier les pièces et leur emplacement. Si vous êtes bloqué, n'hésitez pas à consulter des forums, des vidéos en ligne ou à demander de l'aide à un ami plus expérimenté. Avec un peu de préparation et de précaution, démonter et nettoyer le carburateur d'un scooter peut être tout à fait réalisable pour un amateur.

Hello Adon the small hose coming from the head valve cover you can place a little baby filter and connected to the higher part of the frame of the scooter or place a little resevoir catch can amzn.to/3uiXI2S and the large hose from the air filter you just remove that and the air box if you like

@@VirberelloScooterTips thank you so much I’ve been watching you and my scooter is almost a beast💯🔥

Hello Giorgio thank you for watching my video

Hello John if you have a gy6 150cc search on line for a gy6 carburator Inner Diameter (Intake Side):24mm,Outer Diameter ((Intake Side):32mm amzn.to/3vVYVxT

Hello my friend in my old scooter I had a 120# 38# pilot with a performance filter with my every day scooter I have a 110# 38 # and I like that because every day I ride around 20 miles . Thank you for watching my video

Hello QUICK-STAR yes that Black Bar that goes over the carb and motor and is connected to the frame is important for a better and stronger frame

@@VirberelloScooterTips LOL OK I'll put it back on! Right away!

Hello my friend these carb can last around 5 to 8 thousand miles not bad for the price before you have to change the carb needle valve or diaphram. Thank you for watching my video

@@VirberelloScooterTips thank you so much 🙏 ❤

Hello QUICK-STAR no I will not place any grease because will attract dirt and dust so just place them dry

@@VirberelloScooterTips Before you answered here I put some WD-40 on it...hope this don't mess things up!! LOL

I spray the starter frluid in the back of the carburator

@@VirberelloScooterTips could you do video? Not sure how to access it.

Hello my friend for the Gy6 150 all the carbs that you find in Amazon are great for the dollars you pay amzn.to/2Un4Yww around 25 to 35 but any carb even the more expensive if you like the best performance you will have to rejet them accordingly to your altitude but you do not have to do that because they are jetted on a lean seating that is safe for any altitude

Hello Riccardo carburetor for 50cc are smaller in size but they work the same way

Because the new carb comes with a new hose and every time you can replace any rubber is better because rubber parts age faster

@@VirberelloScooterTips AGREED! Thank You Sir!

Hello my friend sometimes can also be the fuel valve that doesn’t open because vacuum line is leaking or be a dirty carburetor . Thank you for watching my video

Hello Vincent I leave the old filter for a future project but I 'm not sure yet like a tool box or something different I'm still working on the idea

What happen my friend

@@VirberelloScooterTips I’m going to have to make a short RU-vid video so I can show you like a little short so I can show you and demonstrate what I’m talking about

Hello no that is just a stock carburetor but I should buy a performance one very soon

@@VirberelloScooterTips what carburetor should I buy for my 150cc

I'm ready to answer

Yes you right I do not like that frame to close to the carb

Hello Daniel check this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M9db3uuTZHg.html