How to replace clutch cable for Honda Walk-Behind Lawn Mower

Подписаться 10 тыс.

Просмотров 94 тыс.

50% 1

This video is about How to replace clutch cable for Honda lawn mower. 54510-VG4-C01 Genuine OEM Honda Walk-Behind Lawn Mower Clutch Drive Cable
Ordering a Tesla? Get FREE Supercharging 👇
🚙 Model Y & Model 3: ts.la/ray11990 👈 ⚡️⚡️
Part: amzn.to/3d8SkWK
PLEASE VERIFY THE CORRECT PARTS FOR YOUR ENGINE/EQUIPMENT BEFORE SUBMITTING YOUR ORDER. IF YOUR MODEL IS NOT LISTED IN THE DESCRIPTION, DO NOT ASSUME THAT IT WILL FIT
FOR PARTS LOOK UP, PLEASE PROVIDE THEM WITH THE FOLLOWING INFOS: ENGINE/EQUIPMENT'S MODEL, CODE TYPE AND SERIAL/FRAME NUMBER
GENUINE OEM Honda Clutch Cable Part Number 54510VG4C01
"As an Amazon and Home depot Associate I earn from qualifying purchases.”
..............Free Supercharging..............
🔥⚡️🔥Get yourself 1,000 miles or 1,500 km of ⚡️FREE SUPERCHARGING⚡️ when you buy or lease a new Tesla! Just click or enter my referral link to configure and get you a TESLA!!! ⚡️⚡️👉 ts.la/ray11990 👈 ⚡️⚡️
Thanking you for supporting my RU-vid channel by liking, subscribing and clicking the bell icon for notification of future videos. It really does make a big difference and also please share my video links.
Twitter: / studiorayhd
instagram: / studiorayhd

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@brianpage7569 3 года назад

If you turn the mower on the side you have it, you can put the new cable threw the whole and mount it to the transmission without having to take out a single bolt..Took 20 minutes to replace mine, same mower.

@DIYRAY 3 года назад

Thanks for the feedback.

@marksullivan57 2 года назад

Good presentation and thanks , but would have liked to see it run and operate at the end. Like Terrel always says”fire it up ,fire it up ,fire it up” lol!!!

@DIYRAY 2 года назад

Thanks for the feedback and please remember to subscribe to the channel and like the video.

@HandyDoc 9 месяцев назад

Excellent video, Thanks! Your best tip was how to engage the tab by holding it at a 90 degree angle. I didn’t pay attention and put it on straight and it kept falling off. Thanks again!

@DIYRAY 9 месяцев назад

Thanks for your comment

@twocents6363 4 года назад

Good video. Very helpful. Thx

@DIYRAY 4 года назад

Stephen Slagle thanks for the feedback and please remember to subscribe to the channel and like the video

@Mysteries4thkind 4 месяца назад

First thing the very first thing is you must disconnect the switch to the spark plug so you don't start lawnmower if you moventhe blades and end up shredded .

@alexharper9786 Месяц назад

I just picked one up off marketplace about a week or 2 ago then this cable broke it was easy to put back for me but now the speed is fast how do I adjust it when I set it to 1 or 2 it’s still as fast as it goes but before the cable Broke that was fine and idk how it would affect because the speed control is on the right side

@tommyfernandez9069 3 месяца назад

You da man ! Much mahalo’z (thanks) from Maui’s lawnmower man! Aloha( hello-goodbye/love ~respect ~friendship -God.

@brownrabbit1663 2 года назад

This man showed me what I wanted to know and in simple terms.

@DIYRAY 2 года назад

Thanks for the comments. Please remember to subscribe and like the video.

@vantrampcindy1360 2 года назад

This video is just what I was looking for! Thank you very much! normally I take way too many parts off and then can get them back on ...so I appreciate you!

@DIYRAY 2 года назад

Thanks for the feedback and please remember to subscribe and like the video.

@TheKendallo49 4 года назад

Thank you so much. Very informative....even though not my model it worked like a charm. Thank you for the clutch trick

@DIYRAY 4 года назад

Thanks for the feedback. Please remember to like the video and Subscribe

@thethiefofalways 5 месяцев назад

Very nice video. The only thing I would say is to maybe consider taking the blades off first thing just to reduce most of the danger in the area, even before you remove the plate.

@gerrymurdoch9972 4 года назад

Not my model Ray, but similar. You explained everything very clearly. Excellent video.

@DIYRAY 4 года назад

Thanks for the feedback and please remember to subscribe to the channel and like

@ShibbyShnaby 11 месяцев назад

To get the plastic end with the 2 ear clips out of the gear housing, there is nowhere near enough room to see what you're doing, let alone snap the ears off with a screwdriver. You need some angled needle nose pliers to compress the clips, then it just slides out. Ask me how I know, 2 hours later 😂

@DIYRAY 11 месяцев назад

Thanks for your comments on this post.

@K4VTE1818 2 года назад

tackled job few minutes ago, went as planned and as directed, thank you!!!

@DIYRAY 2 года назад

Thanks for the feedback.

@Zoloti-Varota 4 дня назад

Thank you for this video.

@donalddoty5768 2 года назад

OK I worked for almost an hour trying to connect the cable to the lever but had no luck. I did get my hands skinned upped pretty good though. So I disconnected the mongo spring from the belt tensioner and was able to flip the transmission over and connect the cable. This is not for a 90 pound weakling. That spring is strong and did not want to come off and it really did not want to go back on. It wore me out. The only precaution is that you put the belt back on the pulley it will fall off when you do this. Good luck to all.

@DIYRAY 2 года назад

Wow, it shouldn’t have been that Difficult if you follow my instruction. But again this was based on my model lawnmower or a similar lawnmower.

@Ralphie5023 Год назад

Go to 1:25

@DIYRAY Год назад

Thanks

@paraglidingtalk 8 месяцев назад

Thank you for making this video. This is the exact video I was hoping to find. Keep up the good work! 👋🤠

@DIYRAY 8 месяцев назад

Glad it helped!

@additaylor1224 3 года назад

Thanks for the video. I was going to throw in the towel because I thought I was going to have to open the gearbox. It helped showing which way to position the connecter on the bottom.

@DIYRAY 3 года назад

Thanks for the feedback and please remember to subscribe to the channel and please like the video.

@jens8942 2 месяца назад

Good camera work, lots of appreciation for your tutorial ! THANK YOU !

@DIYRAY 2 месяца назад

You are most welcome 🙏🏽

@robertwilliams7745 Год назад

I have a Hrr216TDA Harmony II mower. The clutch cable seems to work but the gearbox doesn't move. I assume the cable needs replaced. Since it doesn't move the belt doesn't tighten up so my mower can move. Is this caused by a stretched cable?

@DIYRAY Год назад

That may be the case. You just have to troubleshoot the issue. Good luck 🍀.

@robertwilliams7745 Год назад

@@DIYRAY The cable seems tight. The spring at the handle bar doesn't sag like it was too long. The transmission doesn't move one iota. Never seen one act like this before.

@robertwilliams7745 Год назад

@@DIYRAY I tried to remove a little bit of slack that may have been in the connection. At the handle where the cable is connected via the spring I was able to pull the cable back about 1/2" by wrapping some wire around the cable in the spring so it couldn't retract after you released the handls. I thought if it was stretched this might make up for it. I don't know if I explained what I did but it was in vain. The transmission still didn't take the slack out of the belt to engage the wheels. I don't knwo what to do. Any suggestions? Thanks.

@marclaw4511 Год назад

Great video,i am doing a similar job on a honda izy.Give the cable a good oiling before installing.

@DIYRAY Год назад

Great tip. thanks

@cameronbennett9175 9 месяцев назад

Very well made video not too slow but not too fast. You save me a lot of money.

@DIYRAY 9 месяцев назад

Thanks

@jjd8277 Год назад

Thank you for the very informative video. Do you attach the cable to the clutch before securing it to the housing or to the housing first then the clutch? Thanks again. Jim

@DIYRAY Год назад

I don't remember which was done 1st.

@jjd8277 Год назад

@@DIYRAY Thanks. I figured it out. Appreciate your response. Jim

@nblack6954 4 года назад

My man Ray-Ray....good stuff! I am doing this Thursday when my cable arrives? Assuming taking the rear wheel off makes it easier to access the connection?

@DIYRAY 4 года назад

n black Thanks for the feedback and please remember to subscribe to the channel and like the video.

@MrHugosawrei 3 года назад

Very good video ! my model is HRB 536C, but exactly the same ! Thk you very much Ray Ray

@DIYRAY 3 года назад

Thanks for the feedback and please remember to subscribe to the channel and like the video.

@radiusguitars5039 4 года назад

Thanks a bunch. Just did mine and your directions were spot on.

@DIYRAY 4 года назад

Radius Guitars thanks for the feedback and please remember to subscribe to the channel and like the video.

@lesLeski 3 года назад

really great presentation ! Very helpful.

@DIYRAY 3 года назад

Thanks for the feedback and please remember to subscribe to the channel and like the video.

@robertfrazier9346 Год назад

Thanks for the tips. I’ll use this video as reference when the cable arrives.

@DIYRAY Год назад

Thanks for your comments.

@jordanwilkerson6710 2 года назад

Is the plate you are referring to the mulch/bag plate?

@DIYRAY 2 года назад

Thanks for the feedback and please remember to subscribe to the channel and like the video. To answer your question, I believe so but I’m not positive.

@centerearth 3 года назад

Great explanation and video Thanks for your time saved me a lot of aggravation ha

@DIYRAY 3 года назад

Thanks for the feedback and please remember to subscribe to the channel and like the video.

@cade7458 Год назад

Thank you🙌🏻

@K4VTE1818 2 года назад

great detail , thanks, just ordered my cable. will be tackling this soon

@DIYRAY 2 года назад

Thanks for the feedback and please remember to subscribe and like the video.

@polski45 5 месяцев назад

Thank you DiyRay v. helpful

@DIYRAY 5 месяцев назад

You are so welcome 🙏🏽.

@workingmanGW 3 года назад

Great video, i got the exact machine. So, came to find, my cable was good and the clutch action is frozen. haha. So now I need a video on how to fix a frozen clutch lever at the transmission. I got the machine from a guy who left it outside a lot.

@DIYRAY 3 года назад

Thanks for the feedback and please remember to subscribe to the channel and like the video

@ciararespect4296 3 года назад

@@DIYRAY hi ray I have a Honda hrg 465c1 sde I have the new cable but it's only a spring on the end that hooks to a lever on the clutch mechanism under the machine ? I can't see anywhere that holds the cable cover in place? I connected same as before but now it seems slightly long ? So doesn't engage the drive when I squeeze the lever

@DIYRAY 3 года назад

MAke sure the cable is the right one. Maybe it was mislabeled. Do a side by side of both cables to see if they match in Length. I hope that helps. Good luck.

@ciararespect4296 3 года назад

@@DIYRAY yes thanks