Honda Lawn Mower Clutch Cable Replacement Part # 54510-VL0-P01

Подписаться 609 тыс.

Просмотров 260 тыс.

50% 1

This video provides step-by-step repair instructions for replacing the clutch cable on a Honda lawn mower. The most common reason for replacing the clutch cable is when the self propelled feature is not functioning properly.
Buy part # 54510-VL0-P01 now: www.repairclinic.com/PartDeta...
Additional lawn mower repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclinic.com/RepairHel...
All of the information for this clutch cable replacement video is applicable to the following brands:
Honda
Tools needed: 10mm socket, 10mm wrench, flat head screwdriver, Phillips head screwdriver, pliers
Buy part #181CB now: www.repairclinic.com/PartDeta...
Buy part #326 now: www.repairclinic.com/PartDeta...
Buy part #426 now: www.repairclinic.com/PartDeta...
You can find printable step-by-step instructions here: www.repairclinic.com/Repair-L...
Model displayed: Honda lawn mower HRR216K9VKAA
Connect With Us!
plus.google.com/+repairclinic
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnnh3be
Check out our blog: www.DIY.RepairClinic.com
Don't forget to like and comment on this video, and subscribe to our channel!

Хобби

Опубликовано:

26 июл 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@mariep6828 11 месяцев назад

I'm a 60 year old female feeling quite pleased about fixing my lawnmower following your video tutorial. Thank you, thank you!

@repairclinic 11 месяцев назад

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

@kaschmid7 Месяц назад

Thank you! Just fixed my Honda HRN216VKA watching your video.

@repairclinic Месяц назад

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

@rexluna5430 4 месяца назад

This video just saved me like 150 bucks, thanks man!

@repairclinic 4 месяца назад

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

@shanebowman10 11 месяцев назад

This video was a wonderful help. Struggled a bit getting butterfly handle back together properly. In the end we got it, thanks to this vid!

@repairclinic 11 месяцев назад

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

@garryperrin2408 4 года назад

Very good instructions and helpful!

@michaelold4173 Год назад

Very well done video. Although the shroud was a little different for my HRR216K8 model, the essential details were accurate. Many thanks!

@temanalysis 7 лет назад

Thanks, saved by butt trying to put my mower back together. Great video!

@Crommy5 11 месяцев назад

Great video, thank you! Good idea to put retaining clip for torque bolt in shroud before putting shroud back. Also, is it necessary to take the whole brake bar off or just the left side?

@rickyttops 5 лет назад

Thank you, very helpful

@HsingSun 3 года назад

Thank you for the video. Question: when I pressed the "Smart Drive Control" which caused a "gee gee" noise. Is it about time to replace that cable?

@KLCurran49 3 года назад

The video is certainly very helpful. The torx screw is not nearly as easy to reinstall as depicted in the video. It looks like a special tool was used to allow the bolt to engage the nut. It is impossible to reach it with your hand and still difficult to install when using a magnetic retrieving bar. And since it is difficult to reinstall the shroud, I'd recommend that the drive belt be changed at the same time. It only involves removing 4 bolts that are easily reached.

@shanew7361 Месяц назад

I need a video on the roto stop cable on a Honda HRX 217HYA 200cc with hydrostatic transmission.

@uchiha_shisui682 3 года назад

I've gotta problem with my blades not engaging on a honda gcv 160 ...any suggestions?

@tinawhittaker3996 7 лет назад

my blades won't engage but it self propels . can you tell me how to fix

@albertmorton4754 3 года назад

What cable can I use to keep my mower working I have a Honda 432 self drive I need a dead mans cable

@jackkhol4251 10 месяцев назад

Great video.

@LAWNandORDERTexas Месяц назад

I have the HRX214KVKA MAGA 1433809 (2006). I've replaced the Smart Drive Cable, and the Smart Drive controller (with updated one), but my mower still moves a lot slower than it used too. Any advice on what to try next? I need it back up to speed, I have a long stride.

@Tintoycar 2 года назад

Do you have this video for the HRD536?

@SubaEgger 6 лет назад

Very helpful!

@repairclinic 6 лет назад

Thanks Susan!

@cesarquiroz8477 2 года назад

Thanks friend for vídeo

@mgomez5606 2 года назад

Can you do a video on HRX217HXA 06225-VH7-305 cable kit.

@tracyjimrogers1335 6 лет назад

I am not sure if I need to replace the entire cable or not. The top of my cable that connects to the grip does not look the same as in your picture. The length of the cable looks longer between the cable eyelet and the part the clicks in the spot in the handle. Can I tighten that up or do I need to replace the entire cable?

@jeffbarbour571 3 года назад

Thank you for the video. My mower was not as pretty as this one in the video. I changed the belt while I was changing out the broken cable. The only pain was to put the control butterfly handle back on and not jettison the spring.

@pyroshady 10 месяцев назад

I put the butterfly handles back together but I still can’t get it to engage, what am I doing wrong? Also it just spins

@LAWNandORDERTexas 2 месяца назад

I have this same issue. Wondering if the 'butterfly handles' are worn allowing the pin to misalign? Did you end up fixing it?

@davidharry3612 3 года назад

Good video only thing is need to show more detail of what is top and bottom on parts because they are different

@alexandersteffen7805 3 месяца назад

thank you soo much for this!.👍👍👍👍👍

@repairclinic 3 месяца назад

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

@alexandersteffen7805 3 месяца назад

@@repairclinic just did it. thank you soo much you guys made an excellent video

@Qnbee007 2 года назад

honda hrr2166vka self propelled cable came off and it looks nothing like this no place to latch to

@tinawhittaker3996 7 лет назад

my blades won't engage

@shrefflerd 2 года назад

Can't get old clutch cable loose from bracket.

@davidharry3612 3 года назад

Because some of us are older and we always don't put it back as soon as we take it off so because of the time lapse we forget

@tonym6920 3 года назад

Leave it to Honda to make it complicated, lol

@betabilly 8 лет назад

My HONDA Harmony II HRR216 self propelled mower's drive works fine but when I release the clutch lever, the back wheels will click when pushing the mower forward but the back wheels will not turn when I pull the mower backwards. Is this a clutch cable adjustment problem?

@chadmartin2372 7 лет назад

Traction control cable most likely or possibly a gear tooth slipped on rear tire. Less likely Axle is bent or Drive belt is damaged.

@nellyjet 7 лет назад

my honda lawnmower 217 back wheels will not go backwards only front. what's is the problem please? ?

@AR1G3 6 лет назад

Bit late but no nothing to do with the cable. The clicking when going forward is normal, when your wheels seize up going backwards it's most likely the bushes on the drive axle that are at fault. Your driveaxle will get a bit of surface rust causing it to seize up in the bushings when going backwards. Take the transmission out, and dress up the ends of the axle with a bit of sandpaper until the surface rust is gone.

@larrya6325 8 лет назад

Not so hard to do. Thanks,

@larrya2995 5 месяцев назад

You did well except you quit too soon. You did not show adjusting the cable length for optimum engagement of the drive. Honda has a spec on that.

@tmterry6002 8 лет назад

If somebody has to be alerted to so many safety precautions, they mustn't attempt this replacement on their own and should pay a professional. Chances are they've cut their finger off attempting to open their toolbox.