Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ib/1ASLF00546
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2005-2010 Chevrolet Cobalt. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt
Tools you will need:
• Pry Bar 1aau.to/oc/1AXAA00020
• 16mm Wrench
• 15mm Socket 1aau.to/oc/1AXAA00015
• 19mm Socket 1aau.to/ob/1AXAA00043
• 21mm Socket 1aau.to/ob/1AXAA00043
• 30mm Socket
• 1/2 Inch Air Impact Gun 1aau.to/ob/1AXAA00252
• Torque Wrench 1aau.to/ob/1AXAA00044
• Brake Grease
• Copper Anti-Seize
• Liquid Thread Locker
• Rust Penetrant
• Center Punch 1aau.to/ob/1AXAA00055
• Hammer 1aau.to/ob/1AXAA00091
• Rubber Mallet 1aau.to/ob/1AXAA00413
• Wire Brush 1aau.to/ob/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
26 июн 2022
