Buy Now!
New Crankshaft Position Sensor from 1AAuto.com 1aau.to/ic/1AECS00089
This video shows you how to install a new crankshaft position sensor from TRQ on your 2000-2007 Ford Focus. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• 21mm wrench
• 10mm Socket 1aau.to/obDx/1AXAA00017
• 19mm Socket
• 8mm Socket 1aau.to/obDx/1AXAA00017
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet 1aau.to/obDx/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/ob3g/1AXAA00015
• Torque Wrench 1aau.to/oa7U/1AXAA00044
• Gloves 1aau.to/oaWG/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oauw/1AXAA00068
• Jack Stands 1aau.to/oagz/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
17 мар 2024
