No video :(

How to Replace Exterior Door Handle 93-00 Ford Ranger

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 378 тыс.

50% 1

Buy Now!
New Exterior Door Handle from 1AAuto.com 1aau.to/ia/1ADH...
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off exterior door handle. This video is applicable to the Ford Ranger model years 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, and 03.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oapC/1A...
• Phillips Head Screwdriver 1aau.to/oapC/1A...
• Complete Metric Socket Set 1aau.to/ote/1AX...
• Ratchet 1aau.to/oare/1A...
• Drill
• Coarse Threaded Bolts (to replace rivets)
For More Info visit us at 1aau.to/h/bsq/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 170

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@theoriginaldreadpirateroberts 7 лет назад

Great tutorial! Everything was just as you described. I used 1/4" bolts that were 3/4" long (there's actually quite a bit of open space to have 1" or even 1.5" bolts if you so choose but the 3/4" worked for me). The hardest part of the job was getting the internal door off and back on again lol.

@1AAuto 7 лет назад

+James Gilbert Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/DoorHandleExterior/Ford/Ranger/1ADHS00082?RU-vid&CTA+Comment&D_8fVXk

@JFDhater 5 лет назад

Tried 1.5" bolts (for ease of threading nuts) and they protruded too much into the window path.

@BrotherLeRoy1 11 лет назад

I should have watched this video before tearing my truck apart. Passenger side 1998 for Ranger. I got stick on the rivets. Did not know what to do. Watched your video ... piece of cake. Had to run to Wal-Mart afterhours to get bolts/nuts & washers. Thanks again so much. You are absolutely incredible.

@SwankyDetailer 4 года назад

BOLT SIZE: 1/4” and 3/4” long. I used a lock nut on the back and it worked perfectly. For the chisel i used a philips and a small hammer. Repaired a 2000 Ford Ranger XLT with this. Thanks Again!!!

@annettefries4932 3 года назад

Indeed video to show inside down rods for latch and lock

@utah133 5 лет назад

One of those jobs done mostly by feel... Always fun!

@thereckchanic4709 10 лет назад

Great tutorial. Thanks a bunch. Followed procedure to a T. Works like a charm. One thing though , the yellow clip on the door rod should be gently pried off by hand or flat screw driver . On divers side push it to back pannel of door. On passenger side is just opposite before using the hammer and punch to bust rivets. Also it must be the first thing connected before putting in the nuts and bolts. Just my 00.02 cents.

@jarhead6153 3 года назад

Best video....was doing this job and kept getting stuck at hooking up the damn rod, this vid described and showed how to do the rod easiest way, thank you.

@johngary4784 7 лет назад

1a auto there's many things I would b lost on if it wasn't for your videos, thanks a bunch you helped a lot and didn't even get your hands dirty!

@1AAuto 7 лет назад

+John Gary Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1A/DoorHandleExterior/Ford/Ranger/1ADHS00082?RU-vid&CTA+Comment&D_8fVXk

@hogfan949701 10 лет назад

Thanks for the complete explanation and great camera work! Much appreciated!

@1AAuto 10 лет назад

Thank you for watching! Below is a link to the parts on our website, they include FREE ground shipping. Hope this helps! 1aauto.com 888-844-3393 www.1aauto.com/1A/DoorHandleExterior/Ford/Ranger/1ADHS00082?RU-vid&VideoReply&ATony

@Dr.Mcstaby 2 года назад

Im going to be replacing mine so im glad i found this video

@1AAuto 2 года назад

+DR.Mcstaby Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@evabird2269 3 года назад

Another great video from 1A. Easy peasy, except punching out that second rivet... Appreciate you guys!

@gemcgrew 12 лет назад

Your video helped me to replace door handle on 2002 Ranger. Worked perfectly. Thanks for the help!

@jayrichardson4512 5 лет назад

SO helpful. Thank you 1A Auto...you guys are amazing! I used 1/4"D x 3/4"L bolts with washer/nut and snugged nice&tight...super. I replaced BOTH sides so now lift gate & both doors are new (2 of 3 broke this past year after 16yrs.)

@1AAuto 5 лет назад

+Jay R Thank you for your feedback! We are happy we could help!

@charbottom8621 3 года назад

Thank you for this video. Doesn't look near as complicated as I have been lead to believe. Now I'm going to go do mine myself because I now am confident I can.

@1AAuto 3 года назад

+Char Bottom Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@nickgiard8553 Год назад

awesome video, made it a simple 20 minute job

@josephcostantino5880 8 лет назад

These instructions actually apply to all manual locked models up to at least 2010, the only difference is the interior panel is a bit different, and you only have to remove a small section of the panel on the newer models (2004-2010), although it makes the removing the rod attached to the handle easier if you do.. Replacing the handle itself, is basically the same.

@ggrimaldo1 11 лет назад

Thanks for the video, helps out, plus now I know where to get parts for my old cars,,,

@davidnewkirk2438 4 года назад

My god thank you so much for such a detailed video!! Just replaced my broken handle and it works perfect 🙏

@1AAuto 4 года назад

+David Newkirk Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@arnolddavidfernandez5725 7 лет назад

I ordered chrome door handles instead of those plastic ones that don't last long and I'm going to install them tomorrow, now I know how to, thanks man.

@1AAuto 7 лет назад

+A F Thank you for watching. We're glad to hear your repair will go smooth. Please let us know at 1-888-844-3393 if we may further assist you. 1aauto.com

@taaldinger 11 лет назад

Thanks for posting this video. I had a broken handle, on the drivers side. I was using the passenger side to open the truck, having to lean across time to get the door open, lol. After i saw this video, i ordered the part, and got the whole job done in about 30 min. I wish i could have bought the part through 1AAuto, but it was out of stock...

@JFDhater 5 лет назад

Thankyou very much. Just followed this well done video and replaced my handle on my 95 Ranger.

@1AAuto 5 лет назад

+Jay T You're welcome! Thank you for the feedback.

@68madison 3 года назад

1auto rocks!

@1AAuto 3 года назад

+68madison Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@nellawell4976 5 лет назад

Thank's, you made it look easy & by following your direction "it was".

@mountainjustice 8 лет назад

Thanks a bunch. I dont think I would have been able to figure this out without your good video. Actually I had trouble just getting the door panel off, but Ford has a better design than the GMs I am used to. Where the down rod attaches to the lock mechanism is very hard to see how it connects, now I know what to do. I wish the car companies would make door handles out of metal (like they used to) instead of plastic .... I have also had the door handles snap off on my 99 Camry. Seems like everyone who has an older Camry - who lives where there is freezing rain to freeze the doors shut - has this same problem.

@martineucza486 Год назад

The video title said 93-00, but as I play the video says 93 to 97 handke replacement

@StagArmslower 7 лет назад

I just did the same door latch on my Ranger 2001, worked like a charm

@edwardvasquez7150 6 лет назад

StagArmslower what size bolts did you use

@katiegohde1994 2 года назад

Very helpful! Best video we found!

@1AAuto 12 лет назад

Usually there are a couple of small plastic clips that hold the rods to the door panel. It you remove them, you should be able to remove the rods from the door handle and then remove the outer handle from the truck. Hope this helps you out.

@johngumbs2416 2 года назад

Great work.

@richardzavala2673 4 года назад

Good job boddy

@1AAuto 4 года назад

+Richard Zavala Thanks for checking us out!

@ericjohnson6634 2 года назад

The title says 93-00, but in the video it says only till '97. I tried this on a '98 and the bar inside does not snap out as shown.

@nickfish03 6 лет назад

Thanks for the video. I'll be ordering a Metal (I'm surprised my stock plastic handle lasted this long in Wisconsin) from you later. Cheers

@1AAuto 6 лет назад

+nickfish03 Thanks for checking us out. 1aauto.com

@marvinburley9438 8 лет назад

This is very helpful. I will buy the product at your store for my appreciation. thank you

@1AAuto 11 лет назад

Thanks for watching. 1aauto.com 888-844-3393

@richardschneider9098 7 лет назад

Great video, which is why I just bought the handle from you. And no BS, that website is the easiest to use, too.

@1AAuto 7 лет назад

+Richard Schneider Thank you very much, Richard, glad we were able to help! Any other viewers interested in this part please visit the link. www.1aauto.com/1A/DoorHandleExterior/Ford/Ranger/1ADHS00082?RU-vid&CTA+Comment&D_8fVXk

@dennisarlan3564 4 года назад

Now help me fix my ghost wipers on my 99 Ford ranger...lol

@chrismcdonald257 3 года назад

Do you know if the ranger and mazda have the same rods that connect the handle to the door lock operator

@Built2spillrox13 12 лет назад

Thanks alot for this video! Help me out alot with my FORD RANGER door handle suituation.

@1982matthewtaylor 10 лет назад

thx a ton!!! I was struggling with that...but only for a minute!! thx again

@1AAuto 10 лет назад

Thank you for watching! 1aauto.com 888-844-3393

@jdoucetteguitar 11 лет назад

Thank you so much for this - made the job so quick!

@dennisarlan3564 4 года назад

Thanks brother 👍 Just finished.you the man!!

@1AAuto 4 года назад

+Dennis Arlan Thanks for checking us out! 1AAuto.com

@arjagar 6 лет назад

How about using a carriage bolt from the outside in so you won't scrape your fingers when grabbing the handle?

@1AAuto 12 лет назад

@gabrielmontagemaker You could try to go into the other door if it opens, and open the one that's broke from the inside so that you can repair it.

@alonzocaudill6616 7 лет назад

I did mine on a '08 b2300; da video helped great, thanks lot 4 helping.

@1AAuto 7 лет назад

+alonzo caudill Thanks for watching. If any of our viewers needs to perform this repair we carry the door handles shown in this video on our website www.1aauto.com/exterior-door-handle-pair/i/1adhs00082#RU-vid&CTA%20Comments&

@1AAuto 11 лет назад

Take a close look at that latch. if the "claws" are jammed into the up position, you can tap them down with a flat head screw driver

@BadBart2217 10 лет назад

Thanks for this, it really helped a lot!

@1AAuto 11 лет назад

You could take the door panel off on the other side of the car to see where it goes. Hope this helps you out.

@williamanderson2773 5 лет назад

Great work. Torx T15 is needed on my 2008 instead of T20.

@1AAuto 11 лет назад

AT around 2:48 on the video we show you how to unclip or remove the rod. 1aauto.com 888-844-3393 FREE SHIPPING in the lower 48 states.

@rangerguy17 12 лет назад

hello and my door handle works but its got a little play in it so i have to lift the handle a ways before it starts to engage the door latch do i just have to adjust it or do i need a new handle?

@1AAuto 13 лет назад

@mstblue Punching out and drilling the rivets is the most technical part. Beyond that it is pretty basic. It probably took me an hour including all the time to film. Probably takes me 30 minutes without filming. I would say a person trying it for the first time should give themselves a good hour.

@1AAuto 12 лет назад

@gabrielmontagemaker If the handle works on the drivers side when attached. I would re-attach it to the door with screws or rivits.

@rmhutchins7 6 лет назад

I enjoyed your video. It was very helpful. Thank you!

@1AAuto 6 лет назад

+RM Hutchins You're welcome. Have a great day 1aauto.com

@fdgd9998 3 года назад

Thank u.

@rochellex54 4 года назад

Thank you this really helped me.

@bradforddrake8633 5 лет назад

The lower left side of that metal loop actually fits snugly inside a hole on part of the door latch which goes up and down when you open the door.This has not been mentioned on any of these videos!!

@MarkMeadows90 13 лет назад

That looks difficult to replace. How long did it take exactly to replace it?

@jeepman3047 5 лет назад

These are not the right washer but these bolts will work. Lmao...

@1AAuto 5 лет назад

Thanks for the comment and watching! +jeep man

@1AAuto 13 лет назад

@dpl1108121 Yes you can use rivets.

@1AAuto 11 лет назад

You may want to take the handle to the hardware store with you and try 1/4" bolts to see if they will work for you.

@TheFloridaPappy 8 лет назад

Thanks, for the great video. It will be a great help.

@1AAuto 8 лет назад

+TheFloridaPappy You're welcome! Thanks for watching. For anyone else who might be doing this job, we carry the parts shown in the video on our website. Order from us and we'll cover the shipping. Here's a link: www.1aauto.com/1A/DoorHandleExterior/Ford/Ranger/1ADHS00082?RU-vid&CTA%20Comment&ATony

@maninabox32697 11 лет назад

1aauto i just ordered a pair of handles from you guys and i was wondering, as far as hardware goes, what diameter and length bolts should i get??

@JSTEEZYSNAKE 3 года назад

same here

@dennisarlan3564 4 года назад

Great video 👍

@1AAuto 4 года назад

+Dennis Arlan Thanks for checking us out. 1AAuto.com

@1AAuto 12 лет назад

You would need to somehow remove the door panel so that you can get to the rod to pop the door open.

@christophersanchez3213 9 лет назад

Great information to know.. Very Helpful

@pacospete4299 3 года назад

just bought a 96 model today and the outer door handle on both sides must be out of adjustment , they barely trip the latch at the very top of the upward pull. So are they wore or just need adjustment to this rod you mentioned?

@1AAuto 11 лет назад

The mounting base, is more than likely different.

@shaunng69 8 лет назад

thx for the tutorial. it helped alot

@1AAuto 8 лет назад

+Shaun Ng Thank you for watching. Please let us know how the repair comes out! For anyone else looking to replace their exterior door handles, 1A Auto carries the parts here: www.1aauto.com/1A/DoorHandleExterior/Ford/Ranger/1ADHS00082?RU-vid&CTA%20Comment&ATony

@donaldfafard 7 лет назад

what are the specifics on the bolts, nuts and washers, *1A*?

@4doorlife 6 лет назад

Very helpful, thank you

@AK-ky3ou 7 лет назад

Lifesaver, thank you.

@1AAuto 7 лет назад

+A K Thanks for watching. If any of our viewers needs to make this repair, we carry the replacement door handle shown in this video on our website. Here's a link to them www.1aauto.com/1A/DoorHandleExterior/Ford/Ranger/1ADHS00082?RU-vid&CTA%20Comment&ATony

@MarksmanKMR 12 лет назад

Helped out a lot... Thanks!

@lukewheeldon3600 9 лет назад

Thanks for the very helpful video. What size bolts did you use?

@taxiridefun 11 месяцев назад

Okay you're not showing any pictures of installing the bolts and stuff and you didn't show after you drilled out the rivets can you re rivet or do you have to use bolts and what size bolts into the does the new door handle come with a bolt or do you have to go find them yourself

@ballsofdoom3124 9 лет назад

CAREFULLY pull off the water shield... RIIIIIIIIIIP. lol

@dmuller7601 4 года назад

Watershield? We don't need no stinking watershield

@dobreutra1 7 лет назад

I had to remove the window channel to get to the white clip holding the door handle rod

@johnneperez5408 8 лет назад

thanks brah!

@diegomedina8571 4 года назад

Perdón para la puerta derecha es el mismo procedimiento?

@1AAuto 4 года назад

Hola Diego, los pasos serían los mismos

@howardsurdin4520 5 лет назад

The plastic part on the bottom of door latch rod that secures the rod through the hole does and locks it in place anyone know the part number?

@maxmacguinness3192 11 лет назад

I have followed your instructions to remove my broken handle, how ever the rod that opens the latch came off in my hand. On my 2000 Ranger the connection of the Rod is a slot. The end that works the latch can not be seen to reattach it. Any sudgestions? Max

@skylins1997 10 лет назад

I followed the procedure shown in the video but the "yellow clip" broke. The new handle is on now but I can't connect it to the latch assembly. How do I replace the yellow clip? I'm now worse off than I was before.

@1AAuto 10 лет назад

If you go to the dealer, they should be able to get a clip for you. Hope this helps you out. 1aauto.com 888-844-3393

@theoryofpersonality1420 11 месяцев назад

Okay, I think we can all agree that Ford was being mean and didn't want us fixing our own door handles.

@1AAuto 11 лет назад

You're welcome. Have a great day! 1aauto.com 888-844-3393

@franksilva9215 Год назад

Replace exterior door handle 2004 ford ranger

@615AVI 11 лет назад

Do you have a video for inside back passenger door handle?

@billwilson7383 4 года назад

I have a 95 Ranger just like this. When I put my key in, the truck chimes and dome light on as if a door is open. Chiming constantly while Im driving. Do you have any idea what the problem might be?

@1AAuto 4 года назад

+Bill Wilson Thanks for checking us out! We currently don't have a video on this issue with a repair but it may have to do with the ground for the ignition chime and always being activated. That would be the best place to start without purchasing a part. If there is no issue with that, we would recommend taking this to a mechanic and having them physically look into this for you. 1aauto.com

@michaeldauria6113 9 лет назад

Thanks for the Video will it be the same for the 1990 ford ranger thanks

@1AAuto 9 лет назад

Thank you for watching. The process may be a little different. We will keep this vehicle in mind for future videos. 1aauto.com 888-844-3393

@ChristopherPausz 11 лет назад

I just ordered from 1aauto this part. I didnt know id have to buy hardware. So what size bolts should I buy?? Nice video btw, good for newbies

@ramulchifilms 8 лет назад

Before I get started on this, I noticed that your description skips right over listing the '00 model. Was this an oversight or is the process of changing a 2000 Ford Ranger door handle completely different from every other iteration during that ten-year span?

@1AAuto 8 лет назад

+C.J. Severs This repair will work with '00 models. We will update the description. Thanks for pointing that out and good luck with your repair!

@FaurionWolf 12 лет назад

I have a 98 Ranger and I'm actually having a problem with the rod that attaches to the outside handle from the inside. It's bent and it's preventing the outide door handle from correctly latching on and activating the latch to open the door. I've tried to access it and bend it to a straighter position, but it's proven difficult to get into the door and do that. Can you give me some advice with fixing this problem?

@1AAuto 11 лет назад

You can rivet them back on or bolt them back on. There's not really any certain size, if you get a couple of nuts and bolts from the store that fit through the hole properly without a lot of play, you should be fine. Thank you for your order. 1aauto.com 888-844-3393

@mattcox846 11 лет назад

I have those same style side view mirrors can they be replaced with side mirrors from a 09 ranger ?

@vhcas 10 лет назад

Is the metalic door handle opener the same from the 93 to 2003 models?

@TroyBoy86 11 лет назад

i have a 94 ford ranger, i have just replace driver side door latch i noticed that the rod that aloows outside handle to open door does not fit the new latch i put in, inside handle fits fine and the lock fits fine, the latch came with a smooth hole that is slightly smaller than stock that opens up and clips together, my question is. can i buy a rod that is smoothed at bottom intsead of threaded?

@rip2064 10 лет назад

do you have a video on how to replace the latch on inside door of ford explorer?

@1AAuto 10 лет назад

We currently do not have an auto repair video that shows this particular repair.

@TheDownfallin 7 лет назад

would this work for a 2004 mazda b2300? i know the vehicles are closely related.

@WCGwkf 7 лет назад

is that the same brittle plastic clip that the tailgate rods clip into? I had mine snap the 2nd time I tried to open the tailgate when I bought my truck

@1AAuto 7 лет назад

+WCGwkf It might be similar on the same. you should be able to get a replacement from the dealer. Thanks for checking us out. 1aauto.com