Тёмный
No video :(

How to Replace Front Axle 1999-2007 Ford Super Duty F-250 

TRQ
Подписаться 503 тыс.
Просмотров 91 тыс.
50% 1

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/84/aX...
If the front axle in your truck breaks, or has seized joints, you'll need to replace it. This video shows you how to install a new front axle on your 1998-2008 Ford Super Duty F-250.
• Check here for more videos on the 1998-2008 Ford Super Duty F-250 • Ford Super Duty F-250 ...
This process should be similar on the following vehicles:
1999 Ford F-250 Super Duty
2000 Ford F-250 Super Duty
2001 Ford F-250 Super Duty
2002 Ford F-250 Super Duty
2003 Ford F-250 Super Duty
2004 Ford F-250 Super Duty
2005 Ford F-250 Super Duty
2006 Ford F-250 Super Duty
2007 Ford F-250 Super Duty
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXA...
• Side Cutters
• Snap Ring Pliers
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Copper Anti-Seize
• Gloves 1aau.to/oa/1AXS...
• Safety Glasses 1aau.to/oa/1AXA...
• Floor Jack 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Magnet - Extendable
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford Super Duty F-250 1999-2008 1st Generation: • Ford Super Duty F-250 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

 

28 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32   
@TRQ
@TRQ 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@stevenleslie9711
@stevenleslie9711 2 года назад
Definitely big thrust washer goes between the hub and axle. Hex non-metallic washer sandwiches between the two steel washers, held in place by the snap ring.
@robertdilullo6765
@robertdilullo6765 Год назад
Thanks, that just helped me. I just removed mine and they came out the way you described.
@raikou889
@raikou889 2 года назад
I just started my mechanic job this week and I've already watched an ass load of your videos. Please keep them coming
@chewy-bu1oy
@chewy-bu1oy 2 года назад
Any one see that the back shield wasn't put back on or did I miss somthing but a good job didn't know how to take out my axles now I do thanks
@halffastrace4399
@halffastrace4399 2 года назад
Yeah, pretty poorly reviewed video. No back plate
@floydwolf2436
@floydwolf2436 Год назад
Marsha here from Oklahoma. Thanks for the simple and direct information.
@darrenspahn6657
@darrenspahn6657 Год назад
Great video. You made it look easy.
@joecastillo8995
@joecastillo8995 2 года назад
Do you have a video showing how to replace the inner seal as well as part number? I have a 99 F350 4X4 7.3
@user-os4si9fc3k
@user-os4si9fc3k Год назад
Great video! Answered all my questions. Thx!
@TRQ
@TRQ Год назад
+Rich Schieber Thanks for watching our video! 1aau.to/m/Shop-TRQ
@marcopineda2249
@marcopineda2249 2 года назад
You forgot to put on the brake dust shield.
@jeffb6276
@jeffb6276 2 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P6SKKzp8dtM.html @7:50 on the video I linked you'll see the largest washer goes between the wheel hub and axel seal with the grooves facing inward. You'll also see the 3 thrust washers go specifically round, hex, round, then put on the snap ring between the wheel hub and the 4x4 hub.
@BOSSC351sProductions
@BOSSC351sProductions 11 месяцев назад
This is an example of how NOT to perform a repair. Nothing was cleaned. The metal shavings on the hub lock were still present when you assembled the unit back on. Your inner axle seal was just dangling around the axle tube. You did not even attempt that explanation. You installed the axle with a new outer seal in a dirty, rusty spindle housing THEN decided to try to clean it for the hub installation with the axle and new seal installed. When you rammed the axle in, how do you know if you didnt knock out the inner tube seal? You don't. This is the kind of work that make me cringe.
@danielhillis8687
@danielhillis8687 Год назад
That is one rusty son of a gun! Very helpful though!!
@alejandrogonzalez-xt6uk
@alejandrogonzalez-xt6uk 2 года назад
Thanks, very helpful
@stuartbrock7586
@stuartbrock7586 Год назад
How do you replace that inner seal? I hate it when video gloss over things that I know are going to be really tricky!
@colinstone2770
@colinstone2770 4 месяца назад
Someone able to help a guy out this video has nothing to do with the 4wd axel i got the axel in brand new vacume seal but when I tighten the hub down it doesn't wanna spin freely anymore
@Swampwild1
@Swampwild1 2 года назад
That’s really nice that you forgot the dust cover! Doing it wrong makes watching the video a waste.
@memphetic
@memphetic Год назад
It does??
@guacamoleweiner69
@guacamoleweiner69 Год назад
Just don't forget the dust cover 🤷‍♂️
@K31011
@K31011 2 года назад
Every part of that needs to be replaced should have just bought a new knuckle, axle assembly , and dust seals and do the job once while it's apart. That truck will be back in the shop soon at least its lubed up so it comes apart easy next month.
@danllewellyn1613
@danllewellyn1613 3 года назад
I think he installed the thrust washers in the wrong order
@jeffb6276
@jeffb6276 2 года назад
Me too... I thought the largest one went between the wheel hub axel seal and the hex washer went between the 2 round ones
@natester1993
@natester1993 2 года назад
If not, you'll have the hub and stub axle metal against metal. Destroyed my hub bearings before i learned the hard way.
@dunnoyolo2238
@dunnoyolo2238 2 года назад
So 4x4 hub is not air actuated ?
@halffastrace4399
@halffastrace4399 2 года назад
That’s dodges terrible system
@bobbyboston9155
@bobbyboston9155 2 года назад
Good video but what a rust bucket
@halffastrace4399
@halffastrace4399 2 года назад
No backing plate? Guess that’s not important anymore?
@cameronp5728
@cameronp5728 2 года назад
I find it hilarious in this dude's videos he takes an impact full send to any but then throws a torque wrench on it and trying to go like 60ft lbs and the wrench always clicks. The video gives me a great visual of how to break something down quickly but anyone watching this for the love of God do not tighten this stuff up with an impact
@guacamoleweiner69
@guacamoleweiner69 Год назад
He uses an impact because it's quicker for him, for videos purposes, and this pos is a rust bucket. Literally any and all mechanics use impacts when they can
@leskelly5783
@leskelly5783 Год назад
That's a hub not an axel.
Далее
How to Replace Front Wheel Hub Bearing 11-16 Ford F250
56:54
娜美这是在浪费食物 #路飞#海贼王
00:20
SUPER DUTY VACUUM HUB SEAL & U-JOINT REPLACE
32:56
Просмотров 121 тыс.
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,4 млн
Customer States (Horrible Car Owners) | Just Rolled In
13:44
Ford F-250: Ball Joints & Tie Rod Ends - Part I
31:36
Просмотров 231 тыс.
Replacing F250 Front Axle U-Joints and Seals
24:22
Просмотров 164 тыс.
Fixing a Stuck Ford Super Duty Locking Hub - FOR FREE
16:09
娜美这是在浪费食物 #路飞#海贼王
00:20