Ford F250 F350 1998-2004 Super Duty Front Axle Disassembly Tear Down Walk Through Trouble Shoot 

I have wasted my time watching many other peoples videos of this process ! You boys are the winners by FAR. THANK YOU SO MUCH. I will check your parts website now and order parts

This is a great video! I need to replace some of these seals and didn’t think I could do it. With your video, and your parts, I can service my excursion front axle. Thank you!

Best place to get super duty Dana Spicer parts by a long shot. Best prices and they group things into packages that apply to doing a job so don't have to find every little thing to buy individually.

--What a fantastic video! This is one of the clearest and most concise videos on the subject I've ever seen and was immensely helpful to me. Thanks so much for making it. Glad I now know about you. I've got a 1999 F350 4x4 DRW and will be replacing U-joints and the carrier bearing soon and am glad to know I'll have a good source for parts.

Tried not to use Google as much as possible to do this. Took most of the day. Then I watched this video and now I'm done. Thanks guys for a great video! Very very helpful. God bless you.

Looked all nite for something on this, awesome job.....

best video on the internet of dana axles

just ordered a ton of parts. fast shipping quality parts !

Awesome video, clears up so much confusion I had about the front axle shaft and hub assembly and care. Thanks a ton

Loved the video so much I bought your kit and feel comfortable doing the work myself. THANK YOU!

Doing this repair on my 05 Excursion. thank you .

Excellent video. Videos like this are extremely helpful when working on something new to you. 👍👍

Very nice video ... to the point and all steps are very clearly shown !!!

Thanks for taking the time to explain clearly all the details

Thank you very much for this helpful video. from Jacksonville FL

Currently working on an 04 F-350 with manual hubs, and got an answer that was needed in the last minute of the video. THANK YOU. That solves one worry about working on it!

Very clear, Thanks. I love my 99 F250 super duty and have heard a lot of good things about the Dana axles

You guy's are the best in explaining things

I really wish I could've found this video Monday. I've been fighting all week with this front axle. Thank you

Appreciate your video explaining things slowly for guys like me that’s never taken one apart. I’ll be contacting you on all the parts I’ll be needing to rebuild the entire front end. Thanks again for your help!

I watched your videos and bought your parts on eBay. Thanks for helping out with the parts and video information. Great work.

Saved to my Favorites. make sure I wont lose it. thanks a lot guys. Cheers)

Awesome videos. Super fast shipping. Excellent product. Thank you.

Just found your channel, and i appreciate the clarity and information. I have a mint '01 F350 7.3 4X4 with a fresh fully built longboock and I'm having rear end blues and front end clanking.

You guys are the best! Thank you for the videos!

Outstanding video. Thanks

AWESOME video man ... so glad U made this .. thank you... just saved me a ton of unnecessary work. 😎😎

I found this video in time. Thank you mane

This is so helpful! Thank You.

Thanks for your videos I'm calling Monday to order some parts

Thank you for the videos

Good Stuff, Great Tips👍🏿😀 2016 F250 XLT 4W 4D (Stock)

Thank you great video God Bless you guys

This is how you explain things.

Great video guys! thanks for the help!

Thanks, nice video, l also am a Bob Newhart fan

Great video

Awesome video thank you!!

I'm in the middle of replacing the wheel hub assemblies and axle shafts right now. Was looking for how to remove the U-joints and unfortunately you skipped past that. I bought the Ford F250 F350 Front Axle Shaft Seal And Bearing Kit Common Wear Items 1998-2004. Made it super easy to make sure I had everything I needed. I bought the hub assemblies from Detroit Axle. When I Googled "replace front axle shaft 1999 f350 4WD DRW" your video was at the top of the list. I said "Awesome, that's who I bought the parts from"

Thanks this was very helpful to me

Great video, Helped out alot thx.

Ditto on Helpfulness! Thanks

I bought all these parts from you on ebay, now it time to install once the wind dies down a bit! Thanks

I wanted to thank you for a job well done. I've never taken on apart and without this great video it would of been a huge job. I'll be contacting you as well for parts. Actually my truck was is good shape, but as long as I have it torn down I going to replace seals etc. Thanks!

Top notch vid!!!

Excellent video fellas...we’ll done and thank you.

Great video thanks. I will order parts Decided to fix my 2001 4x4 7.3

Very detailed video

Very helpful

Flawless video ✊🏻

excellent video,thanks

Thank you bro God bless you

great video.. thank you

Excellent instructional video.

Great video thanks

Great video.

Ty 4 this video....👍😎🇺🇸😇

thank you!

Good stuff

Thanks!

Very helpful. Dropped a like! Thanks

Good Explanation.... BUT where are the parts numbers........

Great video. I have to check your website out.

gracias; por explicar a detalle; de las piezas de ensamble cambiables de eje delantero; ford; 4x4

Instructions are great for disassembling not as good for assembly. I went ahead and ordered their parts kit, unfortunately it came with the old-style axle dust seals. If you watch other videos you'll see what the new style look like. Now I can look forward to doing this job again in a few years. I expected more from Venture.

Hey did you ever do a video on the tube seals you mentioned at the end of this video?

very nice.darn seals are $$$$

Badass

This is my first diesel truck 2000 F250 i'm going to be contacting u if ur still in business great video

I have a 2001 F250 XLT 4X4 7.3 DIESEL. I saw your video too late. They changed the dirt seal and both locks. My old ones say Lock & automatic, these ones now say Lock & free. Is there a difference??

is the dana 60 in the 2004 f250 super duty different than the 2006 f250? I notice on your website that the dana 60 OUTER AXLE SHAFT SEAL GREASABLE U JOINT KITs compatibility only goes up to 2004. great video btw! thanks for the upload

I have a 1999 F350 4x4 and I can’t find the outer hub axle seal for the front right axle. The part number 50381 that keeps popping up is too small.

This is a great informative video!! I have referred to it more then once. What causes the small snub axle bearing to fail? I seems to replace one every other year, even with new snub axles installed.

I'm about to replace my front axle u joints. Do you have a part number for those? 2000 F350 drw with a Dana front diff. Thanks

What are the part numbers for the seals

My only beef with this and similar videos is that no mention is given to early vs late 1999 super duty parts I have an early 1999 SD manufactured in 3/98 so there are significant differences in new parts vs the 99-2004 parts

my truck 7.3 350, when turning or going through a pothole makes a few thunders, an axle in poor condition can cause that?

I've put my entire body behind the pry bar and can't get my axle out. That sucker slid out like it had astroglide on it

Awesome video. Very descriptive. Do you know where I can get the brake dust shield?

What is the Part# of the needle bearing and are both the same? Inner and Outer? Or is there just One?

How did you removed the axle from the the outer axle u joint

Do yourself a favor and save yourself a lot of time and aggravation, spend the $25 and buy the speciality Super Duty snap ring pliers, Amazon or Napa has them . I’ve got 5 different snap ring pliers and spent hours trying to get that ring off. I bought the super duty pliers and it took 30seconds

Guy looks like he's about to pass out

Buy a 1/2" drive 21mm socket or have fun getting the bolt out of a 13/16" socket

I went to your web site and did not find the video of the ball joint change out, could you let me know where to see it? I just bought all the seals and O rings from you guys!

When the axle shafts are out is a good time to service/grease the upper ball joint. Does anyone have tips for during a regular lube job (when the truck is right side up, fully assembled and the axle shaft is in the way) on removing the grease plug, installing the zirk for greasing and then putting the plug back in? Gravity works against me and my fingers have a real hard time squeezing in there while fumbling with the plugs and zirks while I am flat on my back! FYI... a 7mm wrench fits the grease plug (on my 2001 Excursion upper ball joints).

Hello,! I have a FORD F-350 2004 Super Duty Power Stroke 6.0 4X4, what differentials does it have? Dana 60 or Dana 50?

do you have a video on changing the bearing in the assembly you mentioned in this video?

Very good video. Only thing is you didn't have to disconnect tie rod end. You can just turn the steering to get to hub bolts

I'm about to take this exact job on in the next week (personal vehicle) extremely simple and easy to follow video. Thank you. Will be ordering the parts from you. My question is, do you sell a "kit" or do I have to order everything separately? Also, I'm in Virginia, what should I expect as far as a time on shipping? Kind of want to plan around that. Thanks again!

Getting the studs out of the Hub Assembly is a pain in the butt we are managing having to hit the old Hub assembly with a torch to pull the studs. Do you have the part number for the axle seal?

What is that smaller seal called or what part numer is it ?

Is their play in the axle once you assemble everything? Mainly the dust seal.

How do i place an order for the vaccum seal and dust seal plus the 3 washers

How do I find out if I have Dana 50 or 60

just wondering is that small bearing you pointed out on the back of the hub assembly the one that people refer to as the " needle bearing

If I pull my whole front axle assembly and take it in for rebuild can you do that?

@ 9:48, you saying that we can take this hub bearing out ? I was under the impression that you could only buy the whole hub ? if so you got any dana/spicer officials or OEM ?

What's the part number for the one knuckle seal/vaccum seal? Can't find it anywhere

How do you take the axle shaft apart and do you need a special tool for that?