No video :(

How to Replace Front Brakes 06-10 Ford Explorer

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 115 тыс.

50% 1

Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1APB...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old front brakes. This video is applicable to the 06 Ford Explorer
This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oAZ/1AX...
• Pry Bar 1aau.to/ohr/1AX...
• 17mm Socket 1aau.to/oAN/1AX...
• 19mm Socket 1aau.to/omT/1AX...
• 21mm Socket 1aau.to/omT/1AX...
• Slip-Joint Pliers
• 1/2 Inch Breaker Bar 1aau.to/ocD/1AX...
• Ratchet 1aau.to/oDh/1AX...
• Socket Extensions 1aau.to/oAN/1AX...
• Torque Wrench 1aau.to/ork/1AX...
• Brake Parts Cleaner
• Bungee Cord
• Paper Towels 1aau.to/oet/1AX...
• Floor Jack 1aau.to/oiU/1AX...
• Hammer 1aau.to/ohG/1AX...
• Jack Stands 1aau.to/oh7/1AX...
• Wire Brush 1aau.to/ocR/1AX...
Subscribe: / @1aauto
Check out our playlist:
Ford Explorer 2006-2010 4th Gen: • Ford Explorer 2006-201...
Ford Auto Repair Videos: • Ford Auto Repair Videos
How to Replace Brakes with Parts from 1AAuto.com: • How to Replace Brakes ...
For More Info visit us at 1aau.to/h/Qr/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@adrewdog 4 года назад

Great video. I really like how the mechanic goes slow and explains what he is doing and why. Great job.

@dlr713 4 года назад

Just did my pads & rotors...very easy and simple instructions Thanks you very much

@1AAuto 4 года назад

+dlr713 Thank you! We love empowering our viewers and showing how to perform DIY auto repairs!

@E_Jay10 5 лет назад

10:00 Pro trip. When compressing caliper pistons use old brake pad and C-Clamp instead

@Le_Comte_de_Monte_Felin 3 года назад

Yep - before removing caliper from rotor!

@olliehopnoodle4628 7 лет назад

Great Video. Made the brake job easier seeing someone do it first. I did in my driveway, it sure would be nice to have a lift!

@1AAuto 7 лет назад

Thanks for watching. If any of our viewers needs to make this repair we carry the replacement brake rotor and pad kit on out website. Here is a link to them. www.1aauto.com/brake-pad-and-rotor-kit-nakamoto-cd1158%2c-6l2z1125aa/i/1abfs01062?RU-vid&CTA%20Comment&

@1AAuto 7 лет назад

+Ollie Hopnoodle Thank you for watching. Lifts are a great tool to have, but we are glad to hear you were able to replace the parts and now may stop quicker and better now! 1aauto.com

@capi10kirk Год назад

Thank you thank you thank you. I have used this video twice now on an 06 Explorer It is super helpful and easy to follow!

@brucesnider2872 Год назад

This was a good video, much better explanation that the Haynes book. Good information about where to lubricate the parts that is not provided in the Haynes book.

@billyaustin3877 5 лет назад

Great video, great information and easy to follow. Thank for taking the time to do this.

@chrisburch7254 5 лет назад

Right on my man.....saved me alot of cash by switchin to Geico. Im jokin man. I truly do appreciate videos like this one. I was able to change my front pads with ease using your video. 💪💪

@msgypsyqueen 10 месяцев назад

I’m so happy that you said that your vehicle was sitting for “a few years“… My 2010 explorer XLT has been sitting for a couple of years… And I am in the process of getting the brakes looked after. Thank you for your video! Q: I am going to have the rotors and pads replaced, but should I expect that the calipers need to be replaced as well?

@roberthowell6909 5 лет назад

The video was very informativeand helpful however there were a lot of troubleshooting tips I had to find through other videos to complete the great job

@1AAuto 5 лет назад

+Robert Howell Thanks for checking us out. 1aauto.com

@adamrisser1674 Год назад

Video is good, 2 things I would add...make sure to align the slide pins correctly for the caliper to seat properly and I would recommend torquing the caliper bracket bolts to 122 ft. lbs. before torguing the caliper slide pin bolts to 53 ft. lbs. Other than that video well executed.

@alexandrebeaulieu3690 4 года назад

Nice and detailed, like that you compared the pads and took the time to say that they were not done, "about 5K..." but rusted And I like the bungee cord idea! When I changed my pads/rotor, the manufacturer recommended bedding them in, did you skip that part of is it not required?

@RoanokeBread Год назад

Well done. Thank you so much!

@chopperg9443 2 года назад

Excellent video

@michaelquigley1411 2 года назад

Very well done video. Questions: Do you recommend anti-seize on the 21mm caliper bolts? How much torque on 21mm caliper bolts and 17mm slide bolts? Thanks

@mukulsri1862 3 года назад

Hii 1A Auto, thanks for the amazing DIY video. I have changed brake rotors and pads on all four of them on my 09 explorer after changing I noticed that the steering is vibrating around 75mph and I did not have this vibration before. Please help and thanks

@LuisGomez-lp7fd 2 года назад

Great job , thank you

@1AAuto 2 года назад

+Luis Gómez Thanks for the feedback!

@vice86 4 года назад

changing mine today...thanks. Although cant help but lol at thinking 2 hour labor charge....12 minute video.

@1AAuto 4 года назад

+Richard Rico Thanks for checking us out! 1AAuto.com

@larryyoungjr3773 4 года назад

Dude at the shop told me 150 since i have the new pads already and about 2hours service time. But if i didn't have the new pads it would have been 200bucks. This video just saved me 150bucks. Thanks Man. Keep Up the Good Vibes. doot doola doot doo..."

@1AAuto 4 года назад

+Larry Young jr Thanks for checking us out! 1AAuto.com

@Thomasjcolbert82 4 года назад

What about to settings? Other than that, excellent videos. TQ numbers are helpful for the small bolts

@marktrotta3817 4 года назад

good presentation

@1AAuto 4 года назад

+Mark Trotta Thanks for checking us out! 1AAuto.com

@alyssanoyola2012 6 лет назад

Awesome video man thanks

@mr.boostang2064 5 лет назад

Thanks for the video, helps out alot

@1AAuto 5 лет назад

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +GrayFatty

@ramanpreciado2241 3 года назад

Wow I have the same car and color except newer OEM rims. Wow yours is gorgeous.

@autooutlet1563 4 года назад

Great video!

@1AAuto 4 года назад

+Auto Outlet Thanks for checking us out! 1AAuto.com

@fernandoguzman4202 5 лет назад

Awsome video..very clear ...i love it.

@1AAuto 5 лет назад

Thanks for checking us out. 1aauto.com +fernando guzman

@fernandoguzman4202 5 лет назад

@@1AAuto you got yourself a new customer

@maxxpower8961 7 лет назад

Excellent video... I recently replaced both front rotors and brake pads and callipers but now I can't seem to get brake pressure. I did bleed the new callipers and when pumping the pedal it builds pressure but quickly loses it then pedal goes to the floor. Very frustrated... what am I doing wrong? Is it possible a faulty calliper? Vehicle is a 2007 Ford Explorer sport trac

@maxxpower8961 7 лет назад

1A Auto Parts thanks for the quick response... I made a bone head mistake! I had both front callipers on the wrong side so the bleeders were on the down side instead of up like they should be so I guess it created a air bubble so it wouldn't keep pressure. Anyway the brakes work great now. I'm learning!

@BH-gh6qm 10 месяцев назад

my brake pads from 1a auto didnt fit and i had to file down like half an inch of metal by hand. not cool

@tylerjourdan358 Месяц назад

Make it look easy mine is currently not moving

@raykonopka2523 2 года назад

Why not clean the inside of the boots too?

@zn_361 4 года назад

What if I want to go with bigger pads and calipers

@1AAuto 4 года назад

+Zachary Narvaez This is possible, however, not something we would carry as our parts are designed as a direct OE replacement.

@PixelPlateauEngineering 7 лет назад

Thanks for the great video! This was really informative and applicable to my 2007 Mountaineer as well. I'm having trouble with the bolts holding the bracket to the hub - they are incredibly tight and so far I can't break them loose. Is it safe to use an impact wrench on them? And on reassembly, do you know the recommended torque setting for the two different bolt types? Thanks!

@1AAuto 7 лет назад

+Willie Macris You could try to spray some penetrating oil on them, and then use PB Blaster to try to break them free. A breaker bar may also help.

@PixelPlateauEngineering 7 лет назад

Thanks for the info! I used PB Blaster and a 4-foot piece of pipe as an extension on the wrench. Eventually got them loose. Once I did, the rest was easy! Exactly as pictured in your video. Thanks

@fomh 6 лет назад

Did you replace the pads all around or just on the front?

@1AAuto 6 лет назад

+FOMH We also did an auto repair video on how to replace the rear brake rotors and pads. Here is a link to the brake rotors and pads that we carry along with a video. Hope this helps you out. goo.gl/ptcZuL

@fomh 6 лет назад

Thanks, i appreciate that.

@HybernatedBeast 7 лет назад

How good are these nakamotos! Trying to get some for my Scion Tc, do they squeal 1 year in?

@1AAuto 7 лет назад

+DJ Tecktock Thanks for watching. Nakamoto makes very high quality brakes, and they should not squeal within a year. As long as you install them correctly! Here is a link to some brakes on our site: www.1aauto.com/brake-pad-and-rotor-kit-nakamoto-cd1158%2c-6l2z1125aa/i/1abfs01062?RU-vid&CTA+Comment&C8RYw_ToIXs