No video :(

How to Replace Front Brakes 07-13 Chevy Silverado

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,5 млн

Просмотров 102 тыс.

50% 1

Buy Now!
New Brake Kit from 1AAuto.com 1aau.to/ia/1ABF...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to the 07, 08, 09, 10, 11, 12, 13 Chevy Silverado
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/o9g/1AX...
• 19mm Wrench 1aau.to/onx/1AX...
• 19mm Socket 1aau.to/opw/1AX...
• 22mm Socket 1aau.to/obU/1AX...
• 8mm Socket 1aau.to/oPJ/1AX...
• 1/2 Inch Breaker Bar 1aau.to/ojk/1AX...
• Ratchet 1aau.to/oaaK/1A...
• Socket Extensions 1aau.to/oWg/1AX...
• Torque Wrench 1aau.to/os9/1AX...
• Anti-Seize Grease
• Brake Parts Cleaner
• Paper Towels 1aau.to/ogC/1AX...
• Floor Jack 1aau.to/oro/1AX...
• Jack Stands 1aau.to/orB/1AX...
For More Info visit us at 1aau.to/h/aY3/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@STINGER1964 5 лет назад

1 thing to keep in mind , at least for newer vehicles , sliding out the brake pads themselves is not easy as portayed in this video. The little bracket that holds the pads has a little tab that keeps the brake pads from sliding out. You can punch them out the opposite direction to remove them. You will have to remove the caliber bracket first tho. Did this on a 2015 Chevy Tahoe.

@majorwoody1720 3 года назад

Yeah the little tabs on them got my dad and I confused. The tab is supposed to be out but we thought it was supposed to be bent in and the pad goes on it. We even snapped one off on “accident” and called it a day.

@buddytaylor6983 4 года назад

You should always replace the clips on the brake slides. They should come with the new brake pads.

@majorwoody1720 3 года назад

@terrydawkins9936 2 года назад

I have learned so much and have gained confidence to do this myself,thank you for excellent instructions,,,very clear and understanding

@fredmarks6949 Месяц назад

Thats where im stuck at now. 18mm caliper bracket bolts are stuck. Waiting on help to show up and get them out.

@JerryLeeMac 4 года назад

Pretty good video 1A Auto Parts has some nicely done "how to's" , I did find a better one for the 07-14 Chevy truck that was a little better than this one. Plus I was not getting rust in my eyes while watching the video, ha.

@BSTRONG-bx1vn 5 месяцев назад

What is the torque wrench brand you use in your video? I looked on A1 Auto and they don't have it.

@ripkobexnip3719 2 года назад

U don’t need to bleed the brakes when changing just the rotors and pads ?

@77dddraiders38 Год назад

Awesome video! I thought when removing caliper/bracket bolts you pull up and to tighten push down?

@karlatkins5280 3 года назад

Don’t you need to open brake fluid reservoir?

@phillipardell5579 4 года назад

I was watching this video to see which end the wear sensor should be on the inner pad... the one you took off is situated at the opposite end as the wear sensor on the new pad. Which end should the wear sensor be on driver/passenger sides?

@Edward90-q6w 4 года назад

I changed my breaks. But my brake caliper housing is still loose when I tightened the bolts. Is that common?

@needlesinmyeyes7272 4 года назад

Mine was the same, what I did was use a rounded metal bristle brush for a dremel with a liiiiiiitle bit of brakeklean to clean out the dust and debris from the bolt holes and I was finally able to tighten the bolt all the way.

@hattakhomma6133 5 лет назад

Lol did he really spray brake clean on the RUBBER boot 😂

@sanjaygurung9047 5 лет назад

Do you have to change rotter everytime you change brake pads?

@unknown_editz12 4 года назад

No, but if yours are bad already then yes.

@Thebowzer221 5 лет назад

Same process for 2006 four wheel drive?

@1AAuto 5 лет назад

+The Bowzer The correct video for the 2006 Chevy Silverado is linked below, however, you might be able to apply some of the basic steps shown in this video to your application. Hope this helps you out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-25_8oHz1LS8.html

@uncheckedhumor39 4 года назад

thank you for the video. is this the same process for an 07 tahoe?

@1AAuto 4 года назад

+Matt Lott We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@josecontreras5043 3 года назад

How many foot pounds of torque carry the brake bolts on this truck?

@matthewlobberecht6187 Год назад

You didn't spray the new brake pads off with brake cleaner. There could be dirt or debris on them or a chemical that's unknown and could be harmful to the rotor and effect braking. Always a good idea to spray them down as well. I do each brake job.

@skokes1410 3 года назад

Are the brakes vacuum or hydro boost ???

@donniemunroe7512 Год назад

excellent video ,as usual ,thank you.

@leroymorris6036 Год назад

Thank you

@LionSoul46 5 лет назад

Holy mother of rust!

@JerryLeeMac 4 года назад

No kidding ! I am so glad I don't live up North and have to deal with all that rust. That truck looked like a 1946 truck model . I have 200K miles on my Tahoe and it does not look close to that.

@polskiewinnipeg 4 года назад

@@JerryLeeMac thats whats called a 3 year old truck in canada depeing on region if lucky 5 years....

@phillipardell5579 4 года назад

Hey Jorge, yeah, our junk rusts up here, I'm in upstate New York. We just get over it... it doesn't make much sense to get crazy about it. It's just a fact of life.

@edbolick4830 Год назад

Thanks!

@richardbethley2282 4 года назад

What’s the name of the handle looking part behind the caliber at 2:42 ?

@1AAuto 4 года назад

+Richard Bethley Thanks for checking us out! That may be the sway bar link if you are referring to the black piece that is perpendicular to the control arm. Here is a link that shows this piece separate www.1aauto.com/chevrolet-gmc-cadillac-front-sway-bar-link-pair-general-motors-oem-gmsfk00004/i/gmsfk00004?f=939531&y=2007

@thangknowa2567 4 года назад

Nice guy, sad rusted truck. Glad we don't put that crap on our roads down here!

@1AAuto 4 года назад

+Thang Knowa Thanks for checking us out!

@Legenddjt 4 года назад

Probly because you dont have too

@plasma3211 11 месяцев назад

Typical of GM engineering to place two bolts side by side, one a 18mm and the other a 19mm! The 18mm is torqued to 140 ft lbs. Somebody beat up the 18mm bolt by putting the wrong socket on it! It took my acetylene torch to loosen up this beast! Then a trip to the hardware store for a new one @$5.29 per bolt. A breaker bar is useless in this scenario. Clean the 18mm bolt well and put an eye on it before you try to fight it.

@aaronmaxham3714 2 года назад

For a Silverado 2013 work truck ! This video will not help you at all so it's probably safe to say you're on your own I mean the every thing is different then what the guy is say

@1AAuto 2 года назад

+aaron maxham Thanks for the feedback!

@GETxS0ME 4 года назад

Kind of worried about following this tutorial. You spray brake cleaner on rubber boot and also the rotor when you don’t need to do those things. Not to mention you torque down some bolts for the brakes when it just needs to be hand tightened. To each their own I suppose.

@1AAuto 4 года назад

+GETxS0ME Thanks for the feedback!

@Texarmageddon 2 года назад

On the rubber boat I’m not sure, but on the rotor you are supposed to as they come with chemicals you need to get off.

@paulbiggs5564 5 лет назад

Aren’t you suppose to put in new brake hardware when installing new brake pads? Also if your caliper doesn’t have a rubber boot, shouldn’t you put one on? Smh

@JerryLeeMac 4 года назад

Agreed , you should have put a rubber boot on that slide pin. And I usually use brake clean on the pads to make sure they are free of crud.