Тёмный

How to Replace Strut Assembly 07-13 Chevy Silverado 

1A Auto: Repair Tips & Secrets Only Mechanics Know
Подписаться 2,4 млн
Просмотров 155 тыс.
50% 1

Buy Now!
New Shock & Spring Assembly from 1AAuto.com 1aau.to/ia/1ASSP00402
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, loose, or strut assembly. This video is applicable to the 07, 08, 09, 10, 11, 12, 13 Chevy Silverado
🔧 List of tools used:
• Pry Bar 1aau.to/oc6/1AXAA00020
• 15mm Wrench 1aau.to/ogi/1AXAA00010
• 15mm Socket 1aau.to/oAR/1AXAA00015
• 18mm Socket 1aau.to/ohN/1AXAA00043
• 22mm Socket 1aau.to/oaI/1AXAA00266
• Trim Tool Set 1aau.to/ogt/1AXXX00004
• 1/2 Inch Breaker Bar 1aau.to/oey/1AXAA00078
• Ratchet 1aau.to/oHp/1AXAA00016
• Socket Extensions 1aau.to/oAR/1AXAA00015
• Torque Wrench 1aau.to/ojZ/1AXAA00044
• Floor Jack 1aau.to/oiv/1AXAA00068
• Hammer 1aau.to/oeZ/1AXAA00091
• Jack Stands 1aau.to/oiv/1AXAA00065
For More Info visit us at 1aau.to/h/afx/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

29 ноя 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 106   
@1AAuto
@1AAuto 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@jimmoore8362
@jimmoore8362 3 года назад
Ppl Pl
@seeare-elle2961
@seeare-elle2961 2 года назад
Finally a real video where all the parts don’t come off like they were just installed yesterday 🤣
@clucknorriz6683
@clucknorriz6683 2 года назад
Methodical, sensible and to the point, and no dumb techno music, thank you!
@johnparrish573
@johnparrish573 3 года назад
Love how this video is dealing with the realistic problems unlike others that edit all the problem parts
@1AAuto
@1AAuto 3 года назад
+John Parrish Thanks for the feedback!
@korndawggy1801
@korndawggy1801 2 года назад
Yeah, these are good videos. The little details make a difference. Just did the rear shocks on mine. Looking at doing the strut assemblies next.
@treycurrieba
@treycurrieba 4 года назад
How to fight swaybar end link 101 😂
@Mr.Beastforpresident
@Mr.Beastforpresident 4 года назад
TreyCurrieBa Stay tuned for Part 2, where he tries to put it back on, using the WHOLE tool box
@richboyz166
@richboyz166 3 года назад
lol aye he handled it though
@maniacalmonster1
@maniacalmonster1 3 года назад
"You don't have to take that link off, it just makes it a lot easier" .....uhhh....if you say so! DON'T RUIN A PERFECTLY GOOD SWAY LINK. Not required at all for this job
@1OlBull
@1OlBull 5 лет назад
I did not have to remove the sway bar links because I disassembled both sides at the same time. This way most of the spring tension is relieved on the sway bar. Worked for me...
@jesusgarcialqj9629
@jesusgarcialqj9629 5 лет назад
1OlBull I have a 3 1/2 strut spacer will the same method work ?
@silfortytypex
@silfortytypex 5 лет назад
1OlBull you are correct you do not need to remove sway bar links at all like he does here that’s just making more work for yourself he is probably just trying to juice the customer for more labor and parts money. You also don’t have to go with cheap crappy strut assemblies from 1AAuto if you actually care about your vehicle, go with Monroe, KYB, ACDelco or something of actual quality.
@Mr.Beastforpresident
@Mr.Beastforpresident 4 года назад
Clinton Hogan Agree, but who makes the best strut assembly?
@neckbone4941
@neckbone4941 4 года назад
@@silfortytypex actually, if you really care you would do it the long way and get bilstein shocks all around.
@estimatingonediscoveringthree
@estimatingonediscoveringthree 4 года назад
Great real world demonstrations and they have good customer service!!
@1AAuto
@1AAuto 4 года назад
+EstimatingONE DiscoveringTHREE Thanks for checking us out and the positive feedback! 1AAuto.com
@adubbz23
@adubbz23 5 лет назад
Appreciate the vid saved me some money. All that rust on that frame makes me appreciate Colorado's dry weather
@1AAuto
@1AAuto 5 лет назад
+adubbz23 Thank you for your positive feedback! We are happy we could help.
@bigwayne8790
@bigwayne8790 4 года назад
Much respect ‘old school way no power tools great job 👍
@1AAuto
@1AAuto 4 года назад
+Big Jone’s Thanks for checking us out!
@BigHomie030
@BigHomie030 2 года назад
I just swapped mine out on my 2011 Silverado 1500 2wd crew cab v-8 5.3 litter. Removing the sway bar links was not necessary on my truck. I used a Pittsburg jack and the strut assembly just came out towards the engine block. The holes did not line up but I was able to line them up with a pry bar and also if you do end up taking the sway bar link off it’s going to be difficult to get them both back on without having to loosen the opposite side just fyi.
@danbakken1
@danbakken1 4 года назад
after completing did anyone notice when he put the tire back on that the strut looked like the old one..lol
@1AAuto
@1AAuto 4 года назад
+Daniel Bakken Thanks for checking us out. 1AAuto.com
@bigtrucks78
@bigtrucks78 4 года назад
Yeah I noticed that too. They must have used the same video from another video. Instead of videoing it again. But yes I thought it was funny too. But smart of just reusing a video already taken.
@oscarjaime342
@oscarjaime342 4 года назад
it’s the same video they put it on any video that deals with having to put the wheel back on instead of recording one every time
@blakdeth77
@blakdeth77 3 года назад
Time saving trick. Splice film cuts together as needed. No need to re-shoot each time.
@paulsalmon4771
@paulsalmon4771 3 года назад
Noticed that that as well too funny. tricky 1A auto
@terryfenner8978
@terryfenner8978 3 года назад
Great comprehinsive vid. I see a ton of how to replace videos on you tube but none really adressing how to determine if yours are in need of replacing or what to do if you find your top nut to be loose after it's installed on the vehichle for some miles I bring this up because I recently discovered my drivers side front strut had a little latteral play in it and after finding out how to hold on to the stud to tighten up the nut, I did get the nut to turn but I never got anything any tighter. I'm in a 2012 GMC Sierra SLE Z71 4X4 with 4" rancho lift and rancho struts. The lift is just about as old as the vehichle with 178,000 miles on it. I bought it with the lift already on it and I just got new wheels, tires and an alignment. I'm honestly a bit concerned about the tread life on my new tires if there is an un known alignment enemy waiting in the wings. The alignment shop gave no mention of the loose strut bolt at the time of alignment back in october 2020. Any advice is greatly apreciated. Thanks
@Nick-bp8ze
@Nick-bp8ze 5 лет назад
Love this website. Will never walk into a auto parts store again unless in need of a part right away
@1AAuto
@1AAuto 5 лет назад
+Nick’s knuckle breakin’ fixin’ channel Thank you so much for the feedback!
@jesse6265
@jesse6265 5 лет назад
i just buy off amazon
@robertodiaz7953
@robertodiaz7953 Год назад
As always the best
@Bama1963
@Bama1963 4 года назад
Thanks for the money saving videos ya'll make. Cut the head off the bottom end of the sway bar link with that cut off wheel and be done with it already
@1AAuto
@1AAuto 4 года назад
+Summit 1234 Thanks for checking us out! 1AAuto.com
@leroymorris6036
@leroymorris6036 3 года назад
thank you great video
@ArchivosMusicales
@ArchivosMusicales Год назад
Please do a video for a 2014 nissan versa sv note assembly for front struts and rear struts. What is the torque required for the front struts nut?
@skessay
@skessay 4 года назад
ok maybe im not seeing the whole picture. Why do you have to remove the sway link?
@blueduck9569
@blueduck9569 4 года назад
Hey A1 Auto I like your videos and find them very helpful and I plan on buying parts from your website. I have one question though, is there a video on how to replace front shocks instead of these struts with a spring on them? Because that's what appears to be on my vehicle?
@ermac9647
@ermac9647 Год назад
I'm just gonna take a small grenade launcher and blow the sway bar link and the truck to smithereens 😅🤣🤣🤣🤣
@HOTRODRICO
@HOTRODRICO 2 года назад
you were the nicest I've ever see to a old crusty end link lol I woulda bashed may mofo out once the top nut didn't release it with a mini sledge or cut it in half n then banged it out.. you're too nice of a guy lol =) cheers
@noahkb80
@noahkb80 3 года назад
From the end link to the " torque these nuts" I really am just at a loss for words
@shad3654
@shad3654 Год назад
Does the truck have to be up in the air to do this job or can you use a floor Jack ?
@timmcinnis3505
@timmcinnis3505 2 года назад
Great job bouncing back from the rust.
@Mr.boxxchevy
@Mr.boxxchevy 4 года назад
Yes this is what I like rusted bolts like most vehicles around here are. Could had made it easier for yourself if after taking off the nut on the end link you would have just cut off the bolt head instead of the sleeve.
@joshcohen5027
@joshcohen5027 2 года назад
Great video sir, but use the ratchet on the nut, instead of turning the bolt with the ratchet use the ratchet to spin the nut and hold the bolt with the box end wrench.
@jimpantherdrivervickers5439
@jimpantherdrivervickers5439 11 месяцев назад
Using a long extension on the top nuts makes it a whole lot easier.
@allengrimes1158
@allengrimes1158 3 года назад
My 09 has the battery box and the air box and a few other things in the way that you have to remove and it's a pain
@Entreprenorris
@Entreprenorris 8 месяцев назад
So glad I don’t have to deal with the salt like you guys.I would never buy a new truck if I lived up north. Good video but I would definitely be using my small in pack though after I break stuff loose saves so much time
@dennisongeorge1748
@dennisongeorge1748 4 года назад
Thanks.
@1AAuto
@1AAuto 4 года назад
+Dennison George Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@codybaker9554
@codybaker9554 4 года назад
Wow! Look at the rust on that alternator!
@robertortega8524
@robertortega8524 3 года назад
Exactly what I thought when I saw it lol
@SkipFlem
@SkipFlem 2 года назад
Would I be wrong by snapping the link with a breaker bar?
@franciscogarcialara1504
@franciscogarcialara1504 Год назад
Real work whit is problem
@wsttxC10_454
@wsttxC10_454 4 года назад
I just did this same job on my buddies 08 Silverado and it was way faster for me than this poor guy, makes me appreciate living in California I've never had to work on a vehicle that was as rusty as this one is. But good informative video
@1AAuto
@1AAuto 4 года назад
+Nick Cossio Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@israelrojas3351
@israelrojas3351 3 года назад
Its not as bad to be honest. 😂😂😂 thats light rust
@BigHomie030
@BigHomie030 2 года назад
Do I need to get truck aligned after changing the sway bar links and strut assembly?
@midas617
@midas617 2 года назад
no!
@SellTheBenefits
@SellTheBenefits 3 года назад
Why truck all orange color underneath? Does truck live inside ocean? What rust? Regards, Arizona
@MrKickerBass
@MrKickerBass Год назад
You forget the clips that go on the bottom of the strut for the bolts
@lalamorena22
@lalamorena22 4 года назад
👍🏾👏🏾
@maniacalmonster1
@maniacalmonster1 3 года назад
No requirement to destroy a perfectly good sway link to do this job at all. It does not make it that much easier...in fact, I will argue you wasted WAY more time wrestling that link out then just getting the strut done.
@1AAuto
@1AAuto 3 года назад
+Wicket's Claws Thanks for the feedback!
@stephenhawkins6670
@stephenhawkins6670 4 месяца назад
Anyone else notice the condition of the strut when he is putting the wheel back on
@kdgg005
@kdgg005 4 года назад
My goodness that truck is rusty! Must live where there's a lot of salt.
@princenoah21
@princenoah21 Год назад
The other video of this exact same thing from 1A auto said to torque the bolts to 75-80 ft pounds, this one says 37 ft pounds??? Which is it??? Also, is it possible to replace just the front shock absorber, or do I have to replace the whole strut just to do that?
@MegaCody83
@MegaCody83 Год назад
From my understanding, it's 75 for lbs for top nuts and 37 ft lbs for bottom bolts.
@noseyrosie2419
@noseyrosie2419 5 лет назад
How can you tell if you have electronic suspension or don't have it ?
@1AAuto
@1AAuto 5 лет назад
+TX militia Thanks for watching! Electronic shocks will have electrical wires running to them, so that is usually the easiest way to find out! 1aauto.com
@juanhinojosa9784
@juanhinojosa9784 4 года назад
I replace my struts about a week ago, it wasn't that hard. The only thing is that my suspension feels more stiff and going over bumps feels like a knocking sound.... I checked and double clench everything is torque down to specs. Is this normal? Do the struts need to be break in?
@1AAuto
@1AAuto 4 года назад
+Juan Hinojosa Thanks for checking us out! Yes, the struts will need time to break in. Please let us know if you have any further questions, thank you!
@juanhinojosa9784
@juanhinojosa9784 4 года назад
@@1AAuto thank you, your videos really help out a lot to a DIY like my self... that's why I had purchased my struts with you guys
@gutierrezc8709
@gutierrezc8709 4 года назад
Did you pull that truck out from the bottom of the ocean?
@luisororosco1
@luisororosco1 3 года назад
thats how cars look under in Massachusetts
@adsiscool1488
@adsiscool1488 3 года назад
by the way guys. you dont need to take the swap bar off. leave it on and just remove the bolts from the shock. thats all you need to do
@1AAuto
@1AAuto 3 года назад
+ads is cool Thanks for the tip! We'll pass this info along to our production team.
@butterbreath9398
@butterbreath9398 Месяц назад
This is incorrect information. The torque spec on these is 37 foot pounds, not 70-75 foot pounds bottom and 75-80 foot pounds top as stated in the video.
@donlute3444
@donlute3444 2 года назад
Why did you remove the stabilizer isolator? That's the only part that didnt make sense.
@richr2979
@richr2979 3 месяца назад
Do you need alignment?
@1AAuto
@1AAuto 3 месяца назад
+@richr2979 Yes, an alignment should be done after the installation of these parts.
@dalecarll7468
@dalecarll7468 2 года назад
Great Video but I wouldn't waste all that time with the sway bar link; I would have just cut it off because you had to replace it anyway once you cut it.
@lucasskinner9673
@lucasskinner9673 5 лет назад
Is this the same for 4x4
@1AAuto
@1AAuto 5 лет назад
Yes, it should be a similar procedure. +slipperymango 93
@1AAuto
@1AAuto 5 лет назад
Yes, it should be a similar procedure. +slipperymango 93
@hilariocoronado7878
@hilariocoronado7878 4 года назад
I put my blistein shocks with little less than 2” high levels, and removed only the 3 nut from the top of shocks and the 2 bottom ones nothing else
@leonardtaylor1904
@leonardtaylor1904 4 года назад
No
@neckbone4941
@neckbone4941 4 года назад
ALSO, don't actually tighten any of the bolts until you get that sway bar link, and in my case, a suspension leveling kit in place first. Sometimes the sway bar link doesnt line up exactly.
@1AAuto
@1AAuto 4 года назад
+Neck Bone Thanks for the tip!
@aaronmartins4077
@aaronmartins4077 3 года назад
My struts don't fall out that easy WTH
@noahkb80
@noahkb80 4 года назад
Don't worry dude, I cussed it plenty for both of us just watching lol. I instantly want to go outside and kick the sh** out of my truck just because lol
@1AAuto
@1AAuto 4 года назад
+noahkb80 Thanks for checking us out! 1AAuto.com
@matstepniak1755
@matstepniak1755 4 года назад
Am I the only person that noticed shock struts are old when he put tire back on
@matstepniak1755
@matstepniak1755 4 года назад
Good learning video tho thanks
@RD-BRAUNSIN
@RD-BRAUNSIN Год назад
Where's the torch at bro
@HOTRODRICO
@HOTRODRICO 2 года назад
you forgot to mention the clips that go on the lower part of the strut that have to come off the old one and be put on the new one... peace
@1AAuto
@1AAuto 2 года назад
+HOTRODRICO Thanks for the tip!
@richboyz166
@richboyz166 3 года назад
why when you drop the truck to torque the nuts on the wheel the strut looked rusty lol the video been edited out good video
@KiethKieth-fw4gr
@KiethKieth-fw4gr 4 года назад
You doin too much on sway bar..just remove it already..
@soonexrepublican7556
@soonexrepublican7556 Год назад
😅no need to take of stabilzer
Далее
Best exercises to lose weight ! 😱
00:19
Просмотров 14 млн
How to Replace Sway Bar Link 07-13 Chevy Silverado
10:48
How to Replace Rear Shock 07-13 Chevy Silverado
6:47
Просмотров 106 тыс.
Most Common Strut Installation Mistakes!
14:02
Просмотров 1,1 млн
How to Tell If Top Mounts Need Replacing
7:06
Просмотров 141 тыс.