How to Replace Front Brakes 08-14 Cadillac CTS 

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

They truly have the best automotive parts and customer service! UPS lost $600 dollars of my order and they sent me replacements without me having to wait for UPS to do an investigation to find the package. I will be using this company for all my auto part needs.

I LOVE the segmented video! That way I can skip the parts I don't need to watch (such as removing the tire).. Thanks again for another great video!

This was a great video and I used it step by step to change front brake pads and rotors on 2012 Cadillac SRX. Thank you!

Thanks for the great video. BTW, it wouldn't hurt to spray on brake cleaner before wire brushing anything. Maybe wear an N95 too. You don't want to inhale brake dust. Also, I think the torque spec for the caliper mounting bolts is 20 foot pounds for the JE5 brakes.

Thanks for the nice slow and informative video. I’m on it…

Amazing job is very diferente of how is done in Mexico. You are too professional 🙌🏽🙌🏽

2008-14 Cadillac CTS wheel lugs are to be tightened to 140 ft-lbs not 100 ft-lbs as stated around 16:30 in the video. Previous generation CTS was 100

thanks a million

Are sure that u slot on the rotor is pointing the correct way?

Do you need to replace that small star shaped screw on the rotor?? one of mine is completely stripped out so I was thinking about leaving it off.

Does the pin with the rubber go on leading or trailing side?

Eight through 14 does that mean the year of the vehicle so basically it would even work on a Cadillac CTS 2011 same style same sizes of the tools

Another great video, thank you very much. Is this the same for a SRX 2011?

Nice and sexy install!

Aren’t those rotors backwards? I thought the drilled holes and slots are supposed to point to the rear of the car.

Is the torque socket wrench absolutely necessary? what if i don't have one. Can I just use a regular socket wrench and tighten it good.

Are all the tools listed the same for doing the rear pads and rotors also?

I noticed no Loctite was used on any of the bolts. Is it not recommended?

Are the pad ears and backs lubed from OEM factory? Thanks

I want to know what Rotors are those on 1A Auto, I'm trying to buy those exact same Rotors but I'm not sure which one's they are?

is it the same for a 2009 CTS?

Is the torque specs for mounting bolts are the same for 2016 ATS?

is it the same 4 2015 ATS?

Good stuff

Weekend rotor and pads, here I come!! 💪🏽😎

To replace front brakes celandar

T-27 , not T30 man. I’d show pic if I could

He put slotted and drilled rotors, probably good quality pads then puts on the old clips! That is not the way to go expert.

👍🏼👍🏼

Same concept for a 2014 XTS???