No video :(

How to Replace Front Brakes 2006-2011 Honda Civic

Подписаться 503 тыс.

Просмотров 39 тыс.

50% 1

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ib/1ABF...
This video shows you how to install new front brake pads and rotors from TRQ on your 2006-2011 Honda Civic. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• Impact Screwdriver 1aau.to/obP/1AX...
• Phillips Head Screwdriver 1aau.to/obkF/1A...
• Pry Bar 1aau.to/oTU/1AX...
• 12mm Socket 1aau.to/obv7/1A...
• 17mm Socket 1aau.to/obv7/1A...
• 19mm Socket 1aau.to/oahG/1A...
• Brake Caliper Hanger 1aau.to/oiJ/1AX...
• Torque Wrench 1aau.to/oaFB/1A...
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves 1aau.to/o9j/1AX...
• Paper Towels 1aau.to/oCs/1AX...
• Safety Glasses 1aau.to/o2u/1AX...
• Silicone Brake Parts Lubricant
• Floor Jack 1aau.to/o54/1AX...
• Hammer 1aau.to/oUk/1AX...
• Jack Stands 1aau.to/oTZ/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/osW/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@stumorningstar5170 8 месяцев назад

Thanks homie. Boutta change my break pads like a pro

@bitsinmyblood 2 месяца назад

Wow this is fantastic instruction on how to thoroughly perform this replacement

@Chadderall113 4 месяца назад

If you have trouble getting the rotor screws out or you strip them, just drill them out. They aren’t necessary anyway

@FlavorTownResident 25 дней назад

If your pads aren't OEM there's a chance they'll be slightly too long to slide into the bracket properly. You may need to file/grind down the ears until they fit smoothly. Would've saved me an hour or two of frustration had I known. Hope this saves you some time!

@cognac8297 Месяц назад

1aauto shown the break pad install backwards. Your video is right. Mine are done the way you did these. 1aauto that other guy did his backwards. . But this video installs the pads the right way the only way. There is no bi and half way. I did a break pad rotation last nigh. And fixed it. Cause it was causing break pull and lack of power and smells.and heat.

@obfsctr 10 месяцев назад

What anti-seize spray was used @4:49

@kirillpushkin 18 дней назад

I have Honda Civic 2008 LX. I have ordered a set of front rotors with pads (S/N: BKA10834). You website says it should fit my model, but the caliper does not fit in with the pads in place. Plus the pads do not fit in tightly and fell out.

@simppatrol1224 10 месяцев назад

My break rotors won't come out, and I've taken out all the screws its rusted so I assume thats why but any recommendations?

@TheKid0309 7 месяцев назад

Do t you have to squeeze the calipers. Mine usually I have to use a vise or something like

@badabingbadab00m 2 месяца назад

Does the slide pin with bushing go on top or bottom? Thanks in advance

@chanelm.2022 5 месяцев назад

I only have the parts. Not the cleaning agents or cool brushing you have 😅. I don't have the money for all that. Do you think I should just take it into the dealership?