No video :(

How to Replace Front Lower Control Arm 98-11 Ford Ranger

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 174 тыс.

50% 1

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASFK00081
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged lower control arms. This video is applicable to the 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11 Ford Ranger
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oza/1AXAA00013
• Pry Bar 1aau.to/obZ/1AXAA00020
• 16mm Wrench
• Complete Metric Socket Set 1aau.to/ofA/1AXAA00043
• 2 Jaw Gear Puller
• Channel-Lock Pliers 1aau.to/oY/1AXAA00139
• Needle nose pliers 1aau.to/odj/1AXAA00051
• Needle nose pliers 1aau.to/odj/1AXAA00052
• 1/2 Inch Breaker Bar 1aau.to/oc3/1AXAA00078
• Ratchet 1aau.to/oy9/1AXAA00016
• Socket Extensions 1aau.to/ot6/1AXAA00015
• Torque Wrench 1aau.to/ohn/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/oaX/1AXSS00048
• Marker / Writing Utensil
• Rust Penetrant
• Safety Glasses 1aau.to/oy/1AXAA00343
• Chisel 1aau.to/oao/1AXAA00055
• Floor Jack 1aau.to/ogd/1AXAA00068
• Hammer 1aau.to/odp/1AXAA00091
• Jack Stands 1aau.to/ogi/1AXAA00065
• Pick 1aau.to/oce/1AXAA00037
For More Info visit us at 1aau.to/h/ZS/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

13 дек 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@mathewscott8896 Год назад

How you made this video without excessive profanity is impressive.

@tonytiger8857 3 года назад

I had to replace my lower control arm from hitting a rock whilst wheelin at the weekend. Without this video, it would have been a tough job due to not having experienced a torsion bar suspension system in the past. All the little pointers were great. Took me about two hours to do in the street with no power tools, and the rain coming down. Thank you for the video

@1AAuto 3 года назад

+Tony tiger Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@4UIncognito 3 месяца назад

Best video on the subject. I appreciate the fact that you didnt use power tools, it helps a lot to understand.

@NerwinC 4 года назад

Awesome Video. I have a front end suspension kit I have to install. Thank you guys. I love how not everything went perfectly for you because that is exactly how my vehicle works every time I touch it. Now I won't feel too bad when I have to start cutting stuff.

@28tretre 5 лет назад

This the most realistic how to video I have seen. Thanks for making it.

@VilaToro64 5 лет назад

Saved me tons of money I kinda got frustrated due to hard to remove bolts but totally worth it in the end put in hard work you'll save money

@grdnjmsn 3 года назад

Excellent step by step direction. Very helpful video! Thank you.

@frankwiththedank1866 3 года назад

I was struggling w mine cause I had no clue on what to do this video is basically everything I needed thank you guys so much!

@1AAuto 3 года назад

+Frank WithTheDank Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@MikeTastic86 5 лет назад

Currently doing this on my 03 ranger edge, this video has been amazing help 🙏🏼

@1AAuto 5 лет назад

+MikeTastic86 Thanks for checking us out. 1aauto.com

@Bluecat564 2 года назад

Thank you for this vid. I also struggled mightily with torsion bars.

@aux1z11 4 года назад

Thanks for the torque specs 👍

@rogerbrownlee93 5 лет назад

This video really helped me fix my own, and saved about 💯 dollars Instead of going to a mechanic👍

@1AAuto 5 лет назад

+Roger Brownlee Thanks for checking us out. 1aauto.com

@MrTjthegreat1 2 года назад

Good advice on the cutting technique.

@wakaphwap 2 года назад

Great video guys!

@MotoActionADV 2 года назад

3:38 I love how he waves the safety glasses around at this point then doesnt actually put them on XD

@captsnafu Год назад

Random tip, if you cant get the torsion bar or key separated dont cut or hammer it apart on the truck. Just drop the control arm out and do it on a bench

@kellyquirin5438 Год назад

Very helpful video! Questions - What size pickle fork, 15/16"? And what size 2-jaw puller, 6"? Thx!

@twistthrottleatv3504 5 лет назад

Thanx this will be a breeze a my rust free 99 lol you guys rock

@1AAuto 5 лет назад

Thanks for checking us out! +TwistThrottleATV 350

@nofortunatesonII 7 месяцев назад

I have the same wheels on one of my Rangers. I use a paint can opener to remove the center caps. Insert it into the slot, hooked side facing inward, and pull the cap off.

@imgzrona09uc72 5 лет назад

I used this video as my guide to doing LCA both sides. A couple of points. Use of the two arm puller was futile. Kept slipping down the flange. Since I was on jackstands tried using bottlejack to lift and rotate the key. But lifted entire car instead, did not release the key stop. Reinstalled the adjuster screw, cranked it all the way down, made a bullet shaped slug from 5/8" round, placed slug in dimple on key, reset bottle jack under dimple/slug, backed out adjuster, found key stop released and removable. I kmow the slug was not the safest technique but the flat bottle jack anvil did not seem to work. Also, the strut between the stabilizer bar and the LCA is difficult to install, impossible by one man. Got it done with help. Any tips or tricks for this? Finally one ball joint released with a couple good raps, the other resisted all blows. Started to cut stud but it seemed the heat from cutting with 3" wheel actually did the trick!

@dylanfaist7446 7 лет назад

just like to mention it would be smart to get a wheel alignment after doing any procedures on your control arms or any other part of your front suspension

@1AAuto 7 лет назад

+Dylan Faist Thanks for watching and the added tip. Have a great day! 1aauto.com

@tdeseve 7 лет назад

DUDE thanks !

@gingerd2098 2 года назад

Great video! I save a shit ton of time and don’t bother fucking around with the torsion key. Index the front of the torsion bar to the LCA like you did, then support the LCA while you remove the knuckle. The LCA’s drop when you lift the truck from the frame and you can just slide them off after a second or so with the impact hammer. Slide the new LCA on keeping in mind the index mark you made on the torsion bar, bolt it on, and lower it on a jack so the LCA comes up and no special torsion key or puller needed! I did this yesterday on my own Ranger :D

@steve23464 Год назад

I'm about to change mine also. So what you're saying is that you saved the time of not having to use the 2 jaw puller to remove the torsion bar key? In the total time this whole procedure takes, that seemed to take only a few minutes to use the puller. Unless I'm misunderstanding what your saying.

@BTMACK16 5 лет назад

Is this close to the same process for a 2000 expedition 4x4?

@rogerdyson5430 4 года назад

great useful no BS video. would be also good to have something like this on repair/replacement of auto hubs.

@1AAuto 4 года назад

+Roger Dyson Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. Search our video library for more on this vehicle: 1aau.to/m/video-library-c

@haristotal 2 года назад

On the seized torsion bar, I just took the lower control arm out wih it attached and hit it with a sledge hammer to break it free. Just changed out my lower control arm and this video was extremely helpful. Best DIY automotive videos on RU-vid!

@1AAuto 2 года назад

+lumion Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@Moc619sd 2 года назад

I have a turning radius issue ive heard you may have to grind edges off control arm?

@Savage1Living 3 месяца назад

I will probably not get a reply before I do this job tomorrow but, What was the point of taking the key off the torsion bar if it was just gonna go right back on the same bar. I feel like that in itself would tell you what position the torsion bar goes in the control arm as for the key only goes into the frame one way.

@516chris 2 месяца назад

Should you get an alignment after doing this?

@adamm7775 6 лет назад

At what point do you add grease to the ball joint? As soon as you take it out of the box, or when you torque the control arm bolts? Also can you do the UCA and LCA at the same time or do you need to do them one at a time to make sure your bolts get torque and sit correctly?

@urielmejia3600 6 лет назад

Adam Moscatelli you can do them at the same time. You can grease them whenever you would like the grease fitting is there for easy access for ongoing maintenance.

@jeffreyschell5678 2 года назад

for those just reading this its best to grease it whenever you put weight on the suspension after everything is installed. if you grease before you could end up putting too much in there and bursting it when you put weight on it.

@garykeller1698 8 месяцев назад

wish you would show this on a ranger with coil springs

@stevefreeman4825 5 лет назад

you forgot to fill the grease fitting ( I would say that grease fitting is going to get missed quite a lot causing the ball joint to fail ) the grease fitting needs a 90 degree angle, grease fitting facing at a 1 o'clock position so you can get the grease dun on it!!!!!!

@paftaf 4 года назад

steve freeman Thanks.

@tonytiger8857 3 года назад

Mine came with the 90 degree angle, agree that it would be impossible to grease without it

@chandrasekarp8037 4 года назад

Please upload FORD F-150 2011 CONTROL ARM REPLACEMENT AND ASSY

@rolegames500 2 года назад

Do you by any chance know the size of the bolts in terms of m10-m30 2 x 110mm?

@shanevanbeek2694 7 лет назад

i was doing the replacement, everything was going fairly smoothly...until i had to remove the torsion bar. I cut through it twice, theres about a cm gap in the old control arm cut out but the tbar still wont budge. Any tips??

@1tokeover 6 лет назад

Did you ever get the tbar out?

@timothyhaskell8262 11 месяцев назад

Do the torsion bars ever need replacing because of age or wear?

@Drewshey333 7 лет назад

Hello, could you please specify the Torque for the lower control arm bolts? You didn't specify in the video that I noticed like you did for the upper control arm. Thank you!

@Karpiel73 5 лет назад

They do specify in the video. 121 ft lbs.

@MikeTastic86 5 лет назад

Drewshey333 it says near the end of the video torque to 121 foot lbs

@JeffreyNevrotski 2 года назад

When I go to use the gear puller it always wants to fold inward, on my 99 Ranger that lip on the frame is at an angle any suggestions?

@andrewrodriguez8492 Год назад

Do all Ranger trims have that torsion bar? I have a 2000 3l v6 rwd

@domenicstellino5021 5 месяцев назад

do you not torque the bolts on the bushings?

@arainbowinthedark2 6 лет назад

Are these one of the parts where if you replace one side you should replace both so the alignment will be even or can you leave one if it's not damaged/worn out?

@1AAuto 6 лет назад

+Tigershark If the other side is in good shape you can leave it alone. Hope this helps you out. 1aauto.com

@rushelliott2689 6 лет назад

I have all ways replaced both. This way both are done and you don't have to worry about it. If one goes bad how far behind is the other one?

@WhipCityWrencher 6 лет назад

What size puller did you use to unload the torsion bar? Thanks.

@MUSTANG408W 3 года назад

Craftsman 46903

@lesscoRyden Год назад

If the torsion bar normally slips out of the control arm unless its rusted and you cut it like in the video...why was removing the rear torsion assembly required?

@andrewaardema7572 Месяц назад

6:00 if I can't hit it out with hammer and punch, can I use an air hammer?

@moultriemanicmechani 6 лет назад

I'm glad I have a spring front end not that torsion bar

@1AAuto 6 лет назад

+moultriemanicmechani Thanks for checking us out. 1aauto.com

@jacquesdaoud4263 5 лет назад

Thank you for posting very good job and self confidence but you need some power tools tums up

@1AAuto 5 лет назад

Thanks for checking us out. 1aauto.com +Jacques Daoud

@1AAuto 5 лет назад

Thanks for checking us out. 1aauto.com +Jacques Daoud

@danicamiller6143 2 года назад

What if I have a coil spring instead of a torsion bar

@gregbrooks9546 6 лет назад

I have a 1998 ford ranger 2wd that has a coil spring suspension. Do I even have to worry about this.

@1AAuto 6 лет назад

+Greg Brooks If the control arm bushings become worn you may have to service them. 1aauto.com

@jcagam3811 3 года назад

Either you have a torsion bar or coil.

@bobbymelton5277 4 года назад

What size gear puller did he use? 6”?

@1AAuto 4 года назад

+Bobby Melton He used a 2 gear jaw puller. Thanks for watching.

@raiderjohnthemadbomber8666 3 года назад

At 14:00, another reason is metal fatigue which is naturally occurring in a high service part.

@1AAuto 3 года назад

+John Duzan Thanks for the feedback!

@danielray1278 5 лет назад

Is it the same as a ford explorer

@1AAuto 5 лет назад

+Daniel Ray Yes it is

@danielray1278 5 лет назад

@@1AAuto thank you!!!

@rivera75nesto 4 года назад

What size is that 2 jaw puller? Part number?

@MUSTANG408W 3 года назад

Craftsman 46903

@TylerWasick 4 года назад

"Make sure to wear proper safety glasses" and the person that said that didn't wear safety glasses 🤓

@kappachow4809 6 лет назад

So...did he grease that new lower ball joint?

@jcagam3811 3 года назад

He forgot to show that.

@heresy3573 2 года назад

Great video but is it just me of did he cross thread that grease fitting 🤣😂🤣😂

@smittywerbenyeagermenjenso3720 5 лет назад

My truck doesn't have a torsion bar.

@yoilikecornbread 3 года назад

Haha I dont think that was an extreme situation for a ranger. Seems like everytime I get under mine Terry the torch needs to come out to unseze somthing😂

@markmott5862 4 года назад

there is no torsion bar on a 99 ford ranger

@jonathanh.7470 3 года назад

2wd is cool spring.4wd is torsion bar

@michaeledwards8051 4 года назад

Why did you remove the tortion bar key at the back of the bar? Don't you have to put it back in the same place and it's not in the way up front

@drowization 4 года назад

Great vid, but good luck doing this without a lift

@jp-go7hg 4 месяца назад

They don't come with grease ports anymore. Now I know what old people mean when they say "they don't make them like they used to." cheapskates

@troywithrow8058 2 года назад

Not totally sure but I could've swore the torsion pushed out the opposite way that you were trying to get it to go in the video???

@toddbob55 4 года назад

I GIVE THAT AFTERMARKET CHINESE BALL JOINT 20K MILES BEFORE ITS SHOT.

@justinserosr6322 7 лет назад

Why u not using air tools. Would of made that much faster

@1AAuto 7 лет назад

This is true. You can use air tools if you have them to make this job easier. If any of our viewers needs to make this repair we carry the replacement control arms shown in this video on our website. Here's a link to them goo.gl/nwSHfI

@justinserosr6322 7 лет назад

OK thanks bud. Was just wondering why u weren't using air tools. But I'm sure u were showing people that don't have em that it can be done with normal hand tools. Luv ur guys videos. Very detailed. Especially when u say the size of each bolt or nut. That helps out a lot. More than u know!