How To Replace Front Strut Assembly 2004-10 Toyota Sienna

Подписаться 531 тыс.

Просмотров 55 тыс.

50% 1

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1AST...
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2004-10 Toyota Sienna.
• Check here for more videos on the 2004-2010 Toyota Sienna: • Toyota Sienna 2004-201...
This process should be similar on the following vehicles:
2004 Toyota Sienna
2005 Toyota Sienna
2006 Toyota Sienna
2007 Toyota Sienna
2008 Toyota Sienna
2009 Toyota Sienna
2010 Toyota Sienna
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• 17mm Wrench 1aau.to/oa/1AXA...
• 22mm Wrench
• 10mm Socket 1aau.to/oa/1AXA...
• 12mm Socket 1aau.to/oa/1AXA...
• 14mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• Locking Pliers 1aau.to/oa/1AXA...
• Socket Driver
• Torque Wrench 1aau.to/oa/1AXA...
• Bungee Cord
• Marker / Writing Utensil
• Floor Jack 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Toyota Sienna 2004-2010 2nd Generation: • Toyota Sienna 2004-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@brianwitt50 5 месяцев назад

Fortunately, I ordered the exact struts being installed in the video. I’ll be making sure I order trq parts from now on.

@yisroelweiss6973 2 года назад

Thank you so much for the exact detailed video just finished to install my new front KYB strut plus for my 2010 Toyota sienna it's just amazing

@egreen237 Год назад

Outstanding video. Don't do much of my own larger maintenance projects, but following this video I had zero issues.

@FrntRngr Год назад

Thank you for your outstanding contribution. Everything needed, nothing superfluous, no wasted time, decent camera work.

@cisco00079 5 месяцев назад

Why do you guys make it look so easy!

@B00MBATS 2 месяца назад

Great video, thanks so much for posting this re-and-re...

@gabrielstanciu8012 3 месяца назад

You make it look easy. Nice one

@intikabhabib5671 7 месяцев назад

We need you in the classroom!! You make learning appealing with your calm and thorough explanation. Thanks a lot!!

@TRQ 7 месяцев назад

+@intikabhabib5671 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@thomaslindsey7685 Год назад

Great video. Older retired man but cans justify $900.00 each from Vannoy tires in Pensacola. I'll have to DIY. Thank you.

@dennisc5080 Год назад

When you say out the car down to tighten up the three nuts on the top of the strut do you mean down on the ground with the tire installed to push up on the strut or just put down to get easier access to tighten and torque the strut top nuts?

@dennisc5080 Год назад

When you say “put” not “out” the car down……sorry typo.

@crayzygamer1232 Год назад

I enjoy watching your video. Is the rod nut of the upper mount strut pre-torqued for the strut/shock & assembly?

@George_The_Yank 2 года назад

are the torque settings the same for a 2011? Great video awesome detail.

@mysteriousoklahoma777 7 месяцев назад

Torque spec are over 200lbs

@mr2trd143 Год назад

Do you got a video for the rear strut

@apivovarov2 Месяц назад

it should not change wheel toe angle

@JR1068 2 года назад

Dang , dude made this look easy, good job, thanks!

@carlosperez2691 2 года назад

Very nice explanation! Now I am going to do it myself👍! Thank you very much

@jbraMoVal 2 года назад

Was it easy? Did you experience any hiccups?

@jbraMoVal 2 года назад

The sienna was easy compared to my mom's crv rear. It was a pain in the rear.

@jbraMoVal 2 года назад

In the crv you need an alignment pry bar. Removal of the old strut was fairly easily but installing the new took too much time. Plus, one person must be inside the vehicle to screw on the nuts while other person aligns the strut in the housing. Anyways, it got done and mom's happy 😊. Anything for my mom!

@RogerPack Год назад

76 ft lbs torque for the lug nuts but nice job. It appears the reason for getting an alignment after is that the things those two huge bolts screw into is actually supposed to be able to go up and down on the strut to adjust camber. I guess you can't tell from this because it looks all painted together black as if it were fixed? You can use kits to do your own appointments if desired. Or home brew stuff...

@stevesimoneaux8859 Год назад

Very well done and easy to understand process. Thanks

@myooak77 11 месяцев назад

You don’t need to remove washer wipers Motor, Why did you remove them? . I not understand.

@jamessackley935 2 года назад

Great video. I had rusted nuts on sway bar. Extended time to remove caused the transaxle to extend so wheel can no longer line up. What can I do? Please help. My wifes car.

@davidchall4976 Год назад

Thanks for the excellent information the job was easy enough including replacing the linkage arms. It’s a rare thing to see someone using a torque wrench in a video. I have a dealership background and am used to torque specs.