How to Replace Front Wheel Bearing 2009-2015 Toyota Prius

Подписаться 483 тыс.

Просмотров 42 тыс.

50% 1

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00475
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2009-2015 Toyota Prius.
This process should be similar on the following vehicles:
2010 Toyota Prius
2011 Toyota Prius
2012 Toyota Prius
2013 Toyota Prius
2014 Toyota Prius
2015 Toyota Prius
Tools you will need:
• 14mm Socket 1aau.to/oc/1AXAA00015
• 17mm Socket 1aau.to/oc/1AXAA00015
• 21mm Socket 1aau.to/oc/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oa/1AAST00002
• 1/2 Inch Air Impact Gun 1aau.to/oc/1AXAA00252
• Swivel
• Torque Wrench 1aau.to/oc/1AXAA00044
• Anti-Seize Grease
• sanding disc
• Chisel 1aau.to/oa/1AXAA00055
• Large Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
Check out our playlist:
2010-2015 Toyota Prius: • 2010-2015 Toyota Prius
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@TRQ 2 года назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@JoshuaCollins 2 года назад

As a new (to me) Prius owner, I'd like to thank y'all for making these videos. I'll definitely be purchasing parts from 1A!

@GeezerTony 11 месяцев назад

Great tutorial. I bought your part and did mine in my back yard with no power tools. I had a stubborn rotor (you should show that instead of just tapping it and it falling off.) I'd say including jacking up the car, getting all the stuff out and including the rusted on rotor and a test drive I took my time and I was finished in under 3 hours. Total cost including buying a few tools (like the spindle socked and some chemicals) I spent about $115 and saved probably several hundred bucks. Thank you!

@robertsalay7312 Год назад

Living in Northeast Pennsylvania; I can only hope it only takes a few swings with a little sledgehammer to free my hub assembly. Lol. Thanks for the top notch video

@Radogtech818 9 месяцев назад

Thank you for the video. The camera placement was good, and the explanation was totally complete. The parts requirement was also fulfilled, including the Anti-Seize Grease. Thank you for everything.

@marierosellev 9 месяцев назад

The shop I just went to have the weird noise checked which gets worse as the speed increases said it is the wheel bearing and not the cheap tires I placed. They are asking $1700 parts and labor. So thank you , thank you for the video. As a guy with the cordless impact wrench and socket, your video gives me a full confidence that I could do this job.

@TRQ 9 месяцев назад

+Alfonso Alfonsos Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@lumpyzx2645 Год назад

I don't think removing the caliper from the caliper bracket was necessary, but all the other information was good. Looks like a very simple job, I'm used to the stupid press in wheel bearings. Thanks.

@licketysplick2164 Год назад

To the experience, no. To the novice, maybe/probably Nothing wrong with adding in additional steps for the newbies.

@changaizmalik1711 Год назад

Thanks Bro! You saved my time n money 💰, today I did it myself successfully. 👍👍👍 Toyota Prius Hybrid 2015

@josefranciscoesquertalaman3827 2 года назад

Presente en clases excelente trabajo cordial saludo desde Navoyork Sonora México

@bubblebz 9 месяцев назад

Excellent video! I'll be buying TRQ components as a result. Thank you for the how to.

@ukaszrugaa104 3 месяца назад

Great vid 💪🏻💪🏻💪🏻👍🏻👍🏻👍🏻and torque very appreciated 💪🏻💪🏻💪🏻

@Joker58th Год назад

You have a bunch of videos for the 2009-2015 Prius. Don't you mean 2010-2015? The 2009 is the last of the second generation.

@waltp3373 Месяц назад

Living in upstate NY, my wheel bearing did not come off that easy. It was a major pain to remove.

@ProfessionalGasLighting 10 месяцев назад

Thank you for the upload!

@stevel4997 9 месяцев назад

Forgot to mention to spray the axle threads with WD 40 or PB blaster and check to see if the nut has been staked in the groove. If it is, UNSTAKE the axle nut BEFORE removing it. You were lucky and got away with it without buggerring up the threads on the axle. Unless you are planning on selling your Prius within 25k or so miles, DO NOT buy these TRQ hubs. Spend the extra $$ and get the KOYO hubs for around $460 a set. Do not buy them from a stealership. Koyo is the OEM supplier of these hubs to Toyota. DO NOT reuse the axle nuts if they were previously staked. Buy new ones. Ask me how I know and Thank me later.....you're welcome.

@TRQ 9 месяцев назад

+Steve L Thanks for the feedback! 1aau.to/m/Shop-TRQ

@crispbrent Год назад

Excellent video

@JimmyJohnson-ub4rt Год назад

You guys are awesome

@distinguishedgentleman3162 5 месяцев назад

Not that I know more than you (I don't) but i learned you can use a bungee cord to hold the caliper on the strut while you do this so it doesn't fall

@wisamibrahim3815 2 года назад

Thanks!

@josephfitzgeraldnsw5794 Год назад

The more I learn the more I learn I need to do my plan was shocks, struts and springs and wheel hubs and expensive tires. Now I’m going to do rotors pads and calipers, and CV axles

@TomReinke89 Год назад

This should be the same for a 2015 CT200h right? They're pretty much the same car mechanically from what I understand...

@mhd-km9ds Год назад

Perfect

@TuxedoRonny Год назад

Any difference between this procedure and 04-09 prius? Torque specs any different? Forgive me if you have a video of the 2nd Gen prius, youtube app doesn't let me search within a channel (or I don't see how to do it).

@jasondevault5066 Год назад

How do you check if it's bad or going bad, Jack it up and place in neutral?

@frankrial586 Год назад

you can start by jacking up the car, move the wheel from top to bottom or left to right for any loose play if so then its a bad wheel bearing. other ways would be to listen for howling grinding while driving. if its really bad then the wheel wont even rotate. hope that helps!