How to Replace Front Wheel Bearing Chevy Cruze 

*Check out the tools we used below. If the video was helpful, please give it a "thumbs up" and consider subscribing to the channel.*
This video goes over how to locate and replace a front wheel bearing on a 2011 Chevy Cruze with a 1.8 motor. This should be the same process for any 2009-2016 Chevy Cruze with a 1.8 motor. This procedure would be the same for the left or right front wheel bearing. You don't want to over tighten, but it's better than it coming loose. While purchasing a wheel bearing, there are many options. Depending on how long you plan to keep the vehicle, I would get at least a three-year warranty, which should help avoid any future trouble. If you live in a state without a lot of rust or corrosion, this should be a pretty straight forward process. If not, a hammer or a bearing puller/axle puller set would be helpful. Some tools can be bought and then returned at most major auto parts chain stores as loaner tools so you are not charged for use of the tool. Once done, it is a good idea to pump the brakes before moving the vehicle. 185 ft lbs is the proper torque specs for the front axle hub nut.
Tools needed:
Torx Socket Set - - amzn.to/3lU4MA0
Jack and Jackstands -- -- amzn.to/3Cdb1VW
Socket Set -- -- amzn.to/3A1eAgV
SK Wrenches -- -- amzn.to/3CbaKTG
Ratchet -- -- amzn.to/2UK3b52
Penetrating Lube -- -- amzn.to/3ymOqnH
Screw Driver Set -- -- amzn.to/3jOG1EZ
Torque Wrench -- -- amzn.to/3ilGoWx
Hammer -- -- amzn.to/36BF0bC
Pry Bar -- -- amzn.to/3rRGl8b
Air Impact Gun -- -- amzn.to/3B71a3u
Air Orbital Sander -- -- amzn.to/2Xpix0s
Wheel Sander Set -- -- amzn.to/3Ehyrui
Flap wheel sander -- -- amzn.to/3wjZrqZ
Parts:
Front Wheel Bearing - - amzn.to/3IEXauT
These are the tools we used or something that’s similar. There are many manufacturers and various prices. It's a good idea to buy the better tool with the best warranty and easiest exchange in case of tool failure.
Disclaimer:
The Auto Teacher assumes no liability for property damage or injury that happens as a result of any of the information contained in this video. Any information learned from this video is to be used at your own risk. The Auto Teacher recommends safety first! Protective gloves, safety glasses and jack stands are highly recommended. These tutorials are made strictly to help people with their car projects and are given to provide factual information we’ve learned over the past 40 years working on cars. We do not guarantee any particular result or any particular warranty. Any injury, loss or damage contained by the viewer while attempting to follow the video’s instructions is solely the viewer’s fault and not The Auto Teacher.