How To Replace Front Wheel Bearing Silverado 1999-2013 & 2014-17 for $120 | AutoZone Duralast Hub

Подписаться 63 тыс.

Просмотров 370 тыс.

50% 1

Wheel Bearing Replacement. Learn how to replace the wheel bearing hub assembly on almost any truck or car. This is a 2004 Chevy Silverado, GMC Sierra but the process will be very similar for replacing any wheel bearing hub assembly with an axle running through it. I was able to purchase a new hub assembly from AutoZone for $120.
Duralast Wheel Bearing/Hub Assembly-Frnt. We will provide a review of the wheel hub assembly after testing it for some time before recommending you to purchase it. Other wheel hub assembly companies: Moog, NAPA, Driveworks, Timken.
Here is the Wheel Hub Assembly that I used: www.autozone.com/suspension-s...
Similar Wheel hub assembly products available on RockAuto: www.rockauto.com/en/catalog/c...
Other related products:
1AAHK00001
1AAHK00002
1AAHK00022
1ABFS02019
1ABMS00007
1ABMS00047
1ABPS00178
1AHTF00019
1APBS00350
1ASBJ00055
1ASFK03014
1ASFK04629
1ASFK04683
1ASHF00005
1ASHF00063
1ASHS00002
1ASHS00043
ACSHF00004
ACSHS00005
TKSHF00022
TKSHF00080
TKSHS00029
TKSHS00304
******************************************
Required Tools (Affiliate Links)
• 15mm Wrench
• 18mm Socket
• 22mm Socket
• 35mm Socket
• Lug Wrench
• A Piece of Pipe (for leverage)
• Ratchet
• Torque Wrench
• Hammer
• Chisel
• Jack Stands
***************************************************
🎬 Most Current Recording equipment (Affiliate Links)
***************************************************
📷 Video
Canon R6: geni.us/CanonR6_4K
Canon RF 24-70mm F2.8 L is USM Lens: geni.us/VnTwT
Canon 80D Camera Body: geni.us/Canon-EOS80D
Sigma 18-35mm F1.8 Art DC HSM Lens for Canon: geni.us/SigmaLense
Race clips shot using GoPro: geni.us/HERO9Black
🔊 Audio:
Lapel Mic: geni.us/PicoMic
Zoom ZH1 H1 Handy Portable Digital Recorder:
geni.us/ZoomRec
💡 Lighting:
Genaray Flood Light geni.us/GenarayLED
Genaray Softbox: geni.us/GenarayLightBox
Newer Ultra High Power Video Light: amzn.to/2Hl3QO7
----------
Thank you to all of our fans and subscribers for supporting us on our journey!
FOLLOW US ON INSTAGRAM: @THESUNDAEDRIVE - thesundaedrive
CHECK OUT OUR WEBSITE & BLOG: www.thesundaedrive.com
********************************************************************
👪 Partners and Sponsors
********************************************************************
Tool and Dye Designs - Auto enthusiast inspired clothing:
Website: www.toolanddyedesigns.com
Kies Motorsports - For all your BMW needs
Website: www.kiesmotorsports.com
RU-vid: / kiesmotorsports
Speed Circuit - LS Powered Exocet and Evo Upgrades
Website: www.SpeedCircuit.net
********************************************************************
🎵 Music
********************************************************************

Авто/Мото

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 332

@filipinophreak 3 года назад

Im.not a mechanic by any means, i change my own oil, brakes.. this was the first major repair ive ever attempted and with your video it helped me out tons.. i was nervous at first but i was able to do it. I called a local shop and they were going to charge me between 800-1100 dollars to change. No way i was going to pay that.. i looked up so many videos and urs was the only one that i felt was in depth.. thank you so much for your time and knowledge and for saving me a ton of money.. take care and be safe..

@TheSundaeDrive 3 года назад

Glad it helped you! Love hearing this

@nickl8074 2 месяца назад

a lot of work on these older trucks is pretty simple, best thing to do is be confident when you go into a job and PLACE THE BOLTS IN ORDER OF REMOVAL. also take pictures on every step so you remember what goes where.

@samsen3965 2 года назад

Past few days I am watching all the bearing hub exchanges and honestly, your video clip is the best of all. Thanks for the good job and have a wonderful one.

@adrenaline4life233 3 года назад

So much easier than I thought. Thank you for this!

@TheSundaeDrive 3 года назад

No problem! Glad it helped

@SemperShock 3 месяца назад

Yes. I appreciate the actual camera change angle when you were hitting the hub assembly. That makes a big difference in a video. We can’t see from afar (which many creators do, plant a camera a few feet away & never zoom in to where their fingers are at) and you had good lighting as well. Thank you for uploading.

@aaron5.3 Год назад

this is by far one of the most helpful videos because you actually showed everything

@TheSundaeDrive Год назад

Glad it helped!

@robmcrae8713 5 лет назад

Thank you. Great video. Was able to replace my hub assembly on my 2005 Silverado with the help of your video!

@TheSundaeDrive 5 лет назад

Woo! Glad it helped :)

@work4dough 5 лет назад

Awesome job, thanks a million. I just did my 2017 GMC Sierra with your video.

@ODDBALLGALLERYKeithWilliams 3 года назад

Good video👍🏼 short, to the point, and well edited. I’m going to fix mine tomorrow. Thanks

@TheSundaeDrive 3 года назад

Thanks! Hopefully it helps you out!

@kurtatwood7007 3 месяца назад

The best self help video for changing wheel bearings on chevy silverado!

@XxSEF300xX 3 месяца назад

Automatic Sub and like because you don't skip steps. Thank you so much. I was going to pay a shop to do this, but you made me confident I can do this easily myself!

@ronaldelkins6108 Месяц назад

Since the new hub assembly comes with studs in it,knock out a couple of the studs from the old one, run a bolt through the hole, and put a nut on the back side. Use a wrench on the nut ,and the impact on the bolt. Eliminating the hammer, and chisel

@edwardpayne96 2 года назад

I usually loosen the Axl nut before I jack up the truck. If it helps anyone. Awesome video

@JH-kh9lf 5 лет назад

Thanks for the video. I got all my parts (Front Rotor's, Front Wheel Bearing & Hubs, Front Brake Pads, Front Shocks & Front CV Axle Shafts) for $860. Figured might as well do it all at once.

@TheSundaeDrive 5 лет назад

Definitely a good time to get in there and do it all together. Hopefully the video helps you out!

@flywiseman Год назад

Thank you for this video. I took on this job this morning and still have not gotten the job off and was thinking I was missing something.

@clight77 4 года назад

Great explanation on the hammer and chisel part, watched several other tubes and for the life of me I was wondering how theirs came off so easy. Thanks.

@TheSundaeDrive 4 года назад

most RU-vidrs just ship over the hard parts. we try to show it so it isn't a surprise lol

@Brass_Heathen 2 месяца назад

Thanks for keeping it super basic and respectful. There's a lot of guys that are learning off of here

@rickyreza4888 Год назад

This is a great video from start to finish. It's even better you had the sizes of sockets and what to torque them to. Very helpful 👌

@TheSundaeDrive Год назад

Glad you found it helpful! Best of luck with the job!

@user-il5fr1pn7v 26 дней назад

Thank you for your tutorial/example!!! This was on point. Other than the old parts being fused, it was extremely easy. as far as total time time working on it is concerned, it was quick. Thanks again!

@anthonymatamoros828 2 дня назад

Great video and good advice for getting the hub off a lot of people skip over that 10/10

@jonrylander461 4 года назад

Just did this job yesterday. I used a cheapo air hammer from harbor freight (less than $20) with the chisel and it popped off the hub from the knuckle pretty damn fast. Nice video man!

@TheSundaeDrive 4 года назад

Harbor Freight is the best for tools like that lol. Glad it helped!

@jg01lox 3 года назад

I did these steps on my 2005 2wd Silverado. It was a life saver I went ahead and did the whole front suspension. Thanks for the video!!

@TheSundaeDrive 3 года назад

Awesome! Glad it helped!

@johnperez93640 11 месяцев назад

@@TheSundaeDrivethe title said the bearing. U did the hub.

@brody6634 7 месяцев назад

@@johnperez93640I don't think you can change just the bearing on these vehicles. You have to change the entire hub assembly... So replacing the gun assembly, is replacing the bearing.

@johnperez93640 7 месяцев назад

@@brody6634 the bearing alone CAN be replaced instead of the whole hub. But its just easier for the average DIYer to just replace the hub. The hub was put together somehow. If u reverse engineer it, ull see that the bearing CAN be replaced. (With a shop press and correct plates n stuff.) Myself, i buy just the bearings 6 at a time for a cheaper price, and then just replace the bearing whenever another comes in needing a "hub replaced". Like the bearing in idler pulley's, most are all the same bearing. I buy those by the dozen at a time for cheap and replace just the bearing when one comes in needing a pulley replaced. Parts stores dont really like that i do that for people because they wana sell hubs and pulleys. But for how much they sell those parts for, id rather not let them rip people off.

@keithrayeski6417 6 месяцев назад

New sub. I had my passenger side wheel bearing on my 2011 GMC Sierra replaced by a garage because I had an extended warranty and the defect was found during state safety inspection. That was two years ago…this year, during inspection it was found that the drivers side is shot. I’m mechanical proficient enough with a fully equipped garage, that I believe I’m capable of doing this myself. Your video convinced me that I absolutely can! I was quoted 500 at the garage…I can’t deal with that. So, this week I’ll do it myself. Thanks for a detailed tutorial video.

@TheSundaeDrive 6 месяцев назад

Awesome! Love hearing this. Best of luck!

@justanothervote Год назад

For those of you who stripped the bolt, I reccomend using a William's bolt extractor. It worked like a charm for me.

@tonelosmusic 3 года назад

This video helped out a ton. Thank you!!

@TheSundaeDrive 3 года назад

Awesome!

@elbuitre6940 3 месяца назад

Great video i will do it this weekend thansk for the encouragement first time ever

@williamstaggs9285 Год назад

Ya'll make it look SO easy! But this is definitely a useful video. Thanks so much!! 👍💪

@TheSundaeDrive Год назад

Glad to help!

@NixieWaters 5 лет назад

Thanks for adding the ft lbs tork to the vid!!

@TheSundaeDrive 5 лет назад

Of course! We want the videos to be as helpful as possible 👍👍

@godstruesoldiers2539 2 года назад

Second this lol thanks

@alexdean9707 2 года назад

Literally just now followed along and change mine!!

@TheSundaeDrive 2 года назад

Awesome! glad it helped

@ryanfujimura8742 5 лет назад

Great video man. Thank you!

@TheSundaeDrive 5 лет назад

Glad it helped!

@jbyfaith06 4 года назад

Awesome video! Easy to see, follow, & I love the fact that u gave the torque specifications. 👍🏾💯

@TheSundaeDrive 4 года назад

:) glad it helped you out!

@betoquintino1414 Год назад

Wow very simple explanation! And helpful! Thanks for this great video ! You are the man ! 😊

@TheSundaeDrive Год назад

Glad it was helpful!

@edhultgren517 3 года назад

Nice and quick but didn't skip the tough part, thanks

@TheSundaeDrive 3 года назад

Glad it helped! This definitely has some hard parts so don't want to minimize that

@ThePocketMechanic95 5 месяцев назад

Nicely done, nice video work as well. I was able to see what you were doing .

@JC-gw3yo 3 года назад

Great concise video... Thanks for the excellent video

@TheSundaeDrive 3 года назад

Glad it helped!

@dustenskinner8404 10 месяцев назад

Really appreciate the content man, you were a lifesaver

@TheSundaeDrive 9 месяцев назад

Glad to help!

@hartfordsignpost589 2 месяца назад

Nice video. Better than most. Explained well and to the point and yes, you showed the hard part.

@MrRainbowrooster 4 года назад

Really nice job. Thank You!

@TheSundaeDrive 4 года назад

Thanks!

@johnrussell5343 5 месяцев назад

Great vid, thx. Going to try it myself.

@cdubber2.0 3 года назад

THANK YOU!!! I was kicking meself trying to get it off!👍👩‍🔧

@TheSundaeDrive 3 года назад

Glad it helped!

@cdubber2.0 3 года назад

I DID using it!! thanks to your video tip..took me 30min! 😘👍👩‍🔧

@danknitz9679 3 месяца назад

Good video. Ive always used never seize on all my cars lug nuts. People think its a no no but i never had an issue with doing so

@germainalarie9141 4 года назад

wow well done bud ,one of the easiest to follow video you again.

@TheSundaeDrive 4 года назад

Thanks! Glad it helped!!

@johnkay8778 3 года назад

the hub vids for this job have different t specs ..thanks 4 giving the correct ones

@MikroMack 4 года назад

Really great tutorial. 👍🏼

@TheSundaeDrive 4 года назад

Thanks!

@fredpastuh7518 5 лет назад

Great video!Thanks bro!

@TheSundaeDrive 5 лет назад

No problem! Hope it helps!

@bullhandy 3 года назад

Torqued the lugs! Great video! Thanks!

@mariomunoz2303 4 года назад

I enjoy your video...thanks!

@TheSundaeDrive 4 года назад

No problem! Glad it helped

@micjam1986 3 года назад

For anyone struggling. remove one lug stud,, get a long bolt put it through the old hub hole, thread on a big nut till the bolt touches the spindle and the nut threaded up to the back of the old hub... hold the nut with a big wrench as you tighten the bolt,,, when it starts to move.. loosen it and rotate the old hub and do it again. Another trick is a pipe wrench slipped over the hub flange(wrench pointing down so it stays) tighten up the jaws good and then hit the handle of the pipe wrench with a sledge hammer. I havent tried this but ive seen it work good. Maybe a jackstand under the lower control arm spindle to support it before you swing the sledge hammer? Getting pissed helps too ..lol

@TheSundaeDrive 3 года назад

Good tips!! Thank you

@BigChooch8787 2 года назад

Awesome video bro helped alot! Thanks pal

@TheSundaeDrive 2 года назад

Glad to hear that!

@darkdisk 4 года назад

Replaced the driver side hub about five years ago. Had to do the passenger side this morning. Excellent video, hit all the key points you need to do this job. One thing I might add, is that you'll need to apply anti-seize to the hub where it contacts the spindle. Oh and using the chisel to separate the hub was money! Pro-tip right there that was extremely useful.

@TheSundaeDrive 4 года назад

Glad it helped!

@ronfox5519 Год назад

Chiseling that joint definately puts a high spot on the mating surface of the knuckle. It may look like you did no damage, but if you stone that surface, youll see it. Does it matter? Depends on how bad the damaga is vs how long you need the bearing to last.

@TR-qr9hs 18 дней назад

@@TheSundaeDrivehow long did it last ?

@x1stefanyx Год назад

GREAT VIDEO I THOUGHT IT WAS SIMPLE AND DIRECT

@TheSundaeDrive Год назад

Thank you! glad it helped

@Slimbo_85 5 лет назад

Thanks this video really helped, i have the same noise i just want to be sure before i spend the money on the parts.

@TheSundaeDrive 5 лет назад

Glad it helped!

@r.s7081 4 года назад

Thanks for your help.Hopefully I wont screw up replacing mine.

@TheSundaeDrive 4 года назад

Best of luck with it!

@davidyerden5142 Год назад

Great job...thanks for the video... My rotor is frozen also..lol😂

@philipsvatba2125 Год назад

Great help.. thank you

@bigchief4052 4 месяца назад

Bout to go change mine now, wish me luck

@MDTAR15 3 года назад

Really good video... well done!

@tommymurashie 2 года назад

very helpful, thanks!

@TheSundaeDrive 2 года назад

Glad to help!

@richlymann6451 3 года назад

Good Video Sir Very Informative

@TheSundaeDrive 3 года назад

Glad it helped!

@Волхов 3 года назад

Thank you for the video! What can you say about the tires that you have installed? Good quality?

@keepingtime525 4 года назад

Good video. 👍

@TheSundaeDrive 4 года назад

Thanks!

@anthonynyman167 4 года назад

Is there an after market hub assy where the sensor is separate? My passenger side sensor is shot but the hub seems perfectly good. And the warranty is done. I did this job last year on my '06 Silverado on the diver's side. I used the manual chisel&hammer. After 1/2 hr moved to air. 10 seconds later it's off. Only downside was the dust shield got wrecked.

@jggjj 4 года назад

Good video very well explained. I read Autozone hubs dont last more than a couple of years. Many guys recommend Timken. I got one for my Escalade for $140 on amazon.

@TheSundaeDrive 4 года назад

Thanks! I've heard Timken is a good brand as well

@rowdync 2 года назад

Same here. Got mine at Summit Racing for 145.00

@mrarmy300 4 года назад

"6 minutes of just pounding it" lol, nice work, good stamina and grip

@TheSundaeDrive 4 года назад

😂 it’s all about the stamina

@mrarmy300 4 года назад

@@TheSundaeDrive great vid tho! Alternative to all that pounding is to remove the 3 hub bolts halfway, then with a punch or air hammer on the bolt heads it'll break free easier as the force is in line

@MicroSoftner 4 года назад

I'm not gonna even put the 3 bolts back, it's gonna fuse shut anyway lol

@TheSundaeDrive 4 года назад

😂

@SrirachaGT 11 месяцев назад

Very helpful

@charlesmyers9765 4 месяца назад

Vertical play is the best way to check as you demonstrated. Horizontal play could also be tie rods.

@TheSundaeDrive 3 месяца назад

Good point:

@claytonsimplot9554 10 месяцев назад

I replaced mine 8 years ago,now they're needing to be replaced again. I ended up getting a 2" x10" x1/2" flat stock. Drilled 2 holes for the studs and 1 exactly centered between them. I bolted my slide hammer to the flatstock and the flatstock to the hub. My first try was to leave the three bolts in the housing and hit each bolt till the housing moved an inch,it was alot of work.

@blakehobson6930 3 года назад

So I just bought a hub assembly and the holes for the 15mm bolts that hold the hub on is not threaded, so is there anyway somehow to put it on?

@rustyshackelford7651 3 года назад

Good vid, you skipped removing the bolts that hold the bearing on tho. Those can be a challenge. Sometimes you can only use a box end wrench because of the cv shaft being in the way. And they definitely aren't just going to come out easy with a little stubby 15mm.

@enginenut4318 2 года назад

true need a long wrench 15 mm. make sure you dont round the the head bolts. tough to get off

@GRestores 5 месяцев назад

Thank you

@franzrojas7508 2 месяца назад

Thank for your video I do it today but mine doesn’t have the middle nut so is more easy

@EV5687 5 лет назад

I forgot to add that I drove home today 12 miles driving 20 mph emergency lights and all cause of that grinding kinda noise I was legit scared. Then I come home hop on you tune and see you during like nothing lol WOW! I took my 06 Silverado to the shop I just wanna drive safely plus I don’t have the tools for that. Subbing!!!

@TheSundaeDrive 5 лет назад

Haha definitely be safe out there!

@EV5687 5 лет назад

One of the scariest sounds ever lol

@TheSundaeDrive 5 лет назад

Haha yes. Any vehicle making unnatural sounds scares me into compulsively reaching for me wallet 😂

@EV5687 5 лет назад

240 that cost me but I have peace of mind and I can speed again

@mattspillane3332 2 года назад

Had to sub once I saw the Eagles hoodie! Go Birds

@TheSundaeDrive 2 года назад

haha thanks!

@TheHiddenPathToHeaven Месяц назад

Thanks 🙏🙏

@hillcountrygarage Год назад

Good job

@TheSundaeDrive Год назад

Thanks! Hope it helps!

@JJ-rr9uw 2 месяца назад

Did you apply anti-seize to the studs ?

@backyardgrillmaster2910 3 года назад

Great video!!!!!!!!@

@TheSundaeDrive 3 года назад

Glad you enjoyed it!

@ArturooGuillen 3 месяца назад

How to take the top bolt from the back of the bearing ? I can’t even get my socket in there.

@christopherhendricks4369 3 месяца назад

hey just was watching and noticed a step you missed. it's important you clean the splines on the front axle and apply some sort of grease as well. it makes it easier for the next time and prevents the new hub hopefully from seizing onto it

@mattheweustis9506 4 года назад

What greese ? When replacing the hub assembly

@garydoyle7155 4 года назад

the part you said you don't want to feel stupid on at 4:04 put the nut back on to protect the threads then whack it with a hammer to drive the axle out the back - - it moves axle back allowing access to the hub bolts and makes it easier to separate the hub - - it may still take some convincing but the axle end no longer adds adhesion to the issue

@carlospuebla2066 3 года назад

Do you know how to fix your gas gauge and your temperature gauge I cannot find the fuses twist Victor stopped working

@caspere.8461 3 месяца назад

A torch is your friend. A little heat on the bolts does wonders getting them to break.

@joejones8009 10 месяцев назад

Was the truck getting bumpy when reaching high speeds?

@slothdaddy3315 5 лет назад

Have a question do the hub bolts only thread into the hub be the ones on my 99 are so badly rusted the bolt heads are gone so I was thinking I could cut the hub in 3 spots and punch the bolts out ?

@TheSundaeDrive 5 лет назад

Yes, they only thread into the hub so you could cut the hub and punch the bolts out

@travisjudy5994 3 года назад

How much grease do you put the hub?

@r8rsavage510 3 года назад

What’s up man great video I notices though you have a 35mm socket listed but you said 36 in the video? Do you know which one it is? I have to buy one

@eengineer1558 3 года назад

For anyone else wondering, I bought a 36mm and it worked but I felt it was 1 size too large and a 35mm would have been better.

@trevorach9378 2 года назад

I was wondering what that thing was called my hub thing is just hanging there it already off when I took everything off

@sanityone649 4 года назад

Not bad...thanks.

@MAJESTICJONES 5 лет назад

Thank you for the video one question what did you torque the tires lug nuts to??

@TheSundaeDrive 5 лет назад

Manual suggests 140lb-ft

@MAJESTICJONES 5 лет назад

@@TheSundaeDrive thank you appreciate your time man

@charlieboggs5210 Год назад

Also helpful use some penetrating oil where the hub goes inside the spindle loosen the cv axle nut and beat around the wheel bearing that your going to scrap anyway sometimes that way you get away without the chisel

@TheSundaeDrive Год назад

That is always a good idea

@kaylastrelec4006 2 года назад

So I purchased my hub assembly the one from Auto zone by no means am I a mechanic but why doesn't my hub have a hole through the middle ?

@generalwrex 4 года назад

Thank you very much! After I replaced mine my ABS light is stuck on, i haven't drove it that far or that fast, do you know the threshold speed where it will retest?

@TheSundaeDrive 4 года назад

Not sure when it retests, sorry. My ABS light has been on for a while now too but I haven't tested any of the sensors to see if it is the new hub or something else.

@generalwrex 4 года назад

@@TheSundaeDrive I found the issue, when I installed the new assembly I bent one of the pins when I inserted it into the connector, which then broke off, nothing a soldering iron, old sensor, and liquid electrical tape couldn't fix.

@RobtJude 4 года назад

Those 15mm bolts don't come put without a fight. I used a breaker bar with a pipe extension and broke a socket. The socket split into two pieces. Ended up using PB, WD40 and a torch.

@TheSundaeDrive 4 года назад

A Torch and PB blaster are a mechanics best fried

@hitmanfg2 3 года назад

Made it look easy.. Have a 03 rado and my hub bearing broke a part on the highway at 70 mph today 8_20_2020. The inner cap fell off all the grease spilled out also pieces of the bearing including the stones it has inside the bearing . The thing is I didn't have signs of a bad bearing or hub. No knocking or wiggle or grinding what so ever. It just tugged to the left hard. Could of been worse. Hopefully no heavy damage to anything else

@TheSundaeDrive 3 года назад

Aww man. That stinks! Hope everything else is ok! Surprised you didn't have any warning prior

@hitmanfg2 3 года назад

@@TheSundaeDrive I live in Los Angeles Cali. Weather is hot. Windows up a.c. on. I run 33s on my truck it is alil loud with the howling maybe i didntt catch the warning signs. But yea bro all fixed New wheelnhub and rotor 💪💯

@TheSundaeDrive 3 года назад

Glad it wasn't too bad to fix!

@jacobmulvaney42 2 года назад

Is it a 35mm or 36mm? For the axel?

@mattyboyz16 5 лет назад

For anyone interested investing in a 6" puller will make that hard part easier

@TheSundaeDrive 5 лет назад

Definitely a good suggestion!

@kw5150 4 года назад

You can usually rent pullers for nothing at parts stores. They have you put it on your Card. And when you return it they refund your money back.

@eddienc7380 4 месяца назад

If you have really loud mud tires then it would be a good idea to check them every once in a while cause you won’t be able to hear when they start making noise.

@TheNortonio Год назад

Wonder if a gear puller would have help get that hub off? I've got to do my GMC Sierra soon. Starting to sound bad.

@toddwiik4474 Год назад

Puller

@hubashank71 3 года назад

Will a 15mm socket fit on the 3 hub bolts? Is there room for one or do i need a wrench?. ty

@enginenut4318 2 года назад

good luck getting those 3- 15mm bolts off

@markadams5823 2 года назад

36mm nut on the CV axle?

@kx85lover1 Год назад

For anyone watching this video buy a 15mm swivel socket for the 3 bolts! Not a 15 mm with a swivel it has to be a swivel socket. Apply some heat and you’ll have em out in a couple minutes

@TheSundaeDrive Год назад

Good tip!